Only show results available in Connecticut? Ok

subsurface water flow equipment

  • Constructed Wetlands

    Since the start in 1997 in Wageningen Kilian Water has been engineering constructed wetlands which have a minimum energy requirement and a maximum reliability. Constructed wetlands are natural wastewater treatment systems which are low in energy consumption and which require minimal maintenance. The reason for the low energy ...

    By Kilian Water based in Wageningen, NETHERLANDS.

  • Cut-Off Walls

    The traditional liquid slurry trench method is well known for creating hydraulic barriers and has been used for decades to stem the flow of subsurface water and water-borne contamination. In many cases, a backfill material with more structural strength is desired, particularly where subsurface flow rates are high or in earthen dams or dikes where ...

    By AquaBlok, Ltd. based in Swanton, OHIO (USA). from Geotechnical Applications Product line

  • Aquadrain - Model 30H - Subsurface Drainage Composite

    A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a woven polypropylene filter fabric bonded to oneside. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

    By CETCO based in Wallasey, UNITED KINGDOM. from Building Materials - Drainage Products - Aquadrain Product line

  • Aquadrain - Model 15X - Subsurface Drainage Composite

    A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylene filter fabric on one side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

    By CETCO based in Wallasey, UNITED KINGDOM. from Building Materials - Drainage Products - Aquadrain Product line

  • Aquadrain - Model 15XP - Subsurface Drainage Composite

    A three-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylenefilter fabric bonded to one-side and a polymeric film bonded to the other. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

    By CETCO based in Wallasey, UNITED KINGDOM. from Building Materials - Drainage Products - Aquadrain Product line

  • Hydraway Drainage Systems

    Hydraway Drainage Systems has the highest inflow rates on the market with over 70% open space for water intake on all four sides. It also has the highest compressive strengthsat 11,400 PSF, more than doubling other systems on the market.Don’t believe us? Read some of our testimonials below from previous ...

    By Applied Turf Products LLC based in St. Peters, MISSOURI (USA). from Drainage Products Product line

  • Ag Catch - Subsurface Water Management System

    Your subsurface water management system can only function as well as its outlet. So if the grade on your system won’t allow for a gravity flow outlet, Prinsco’s agricultural catch basin provides the perfect solution. They are built from polymer coated corrugated metal and provide strength and durability for years of trouble-free ...

    By Prinsco, Inc. based in Willmar, MINNESOTA (USA). from Agriculture Product line

  • Supersaturated Water Injection (SWI)

    Supersaturated Water Injection (SWI) is an effective technology for Nonaqueous Phase Liquid (NAPL) recovery. Carbon dioxide (CO2) supersaturated water injected into the subsurface results in the nucleation of CO2 bubbles at and away from the injection point. As the supersaturated liquid flows through the porous medium, gas evolution occurs in situ ...

    By True Blue Technologies, Inc. based in Richmond, BRITISH COLUMBIA (CANADA).

  • KSGV Modified Humic Solution - Modified Humic Solutuon for a PRB

    I would like to take this opportunity to introduce PRB Environmental Group, Inc.. Our main objective is to provide solutions to soil and groundwater contamination using Humic substances.We are announcing a new patented leading edge technology for Decontamination of Water and Soil; using Humic Substances for a more effective and cost-efficient ...

    By PRB Environmental Group, Inc based in Peachtree City, GEORGIA (US) (USA).

  • MAE2 - Soil Vapor Systems

    Soil Vapor Systems are designed to induce vacuum and air flow to the subsurface to enhance removal of contaminants in the soil. SVE Systems typically operate in ranged of 50” water column vacuum up to 15” Hg vacuum. A wide variety of blowers can be used based on the required vacuum and flow. Typical industry standards include ...

    By Mid-Atlantic Environmental Equipment, Inc. based in Bluffton, SOUTH CAROLINA (USA). from System Components Product line

  • 3D - Non Woven Geotextiles

    A highly durable, needle-punched geotextile manufactured in multiple weights & lengths, using the highest quality polypropylene staple fibers. These fabrics are beneficial for soil retention & provide outstanding water flow. Used in the following applications: separation, drainage, filtration, underlayment, erosion control, subsurface ...

    By DDD Erosion Control, Inc. based in Ashburn, GEORGIA (US) (USA).

  • Multi-Phase Extraction Remediation Systems

    SSI’s Multi-Phase Extraction systems are available in a wide range of configurations. The Multi-Phase Phase Extraction process involves the simultaneous subsurface removal of air, water, and product and therefore each system is designed to meet site specific needs. System component selection is dependant upon expected operating vacuum level and ...

    By Specialty Systems Integrators, Inc. based in Plymouth, MINNESOTA (USA). from New Remediation Equipment Product line

  • StormChamber - Model SC-34 - Stormwater Chambers

    StormChambers storm water chambers are quick and easy to install. The side-portal feed provides greater flexibility in engineering and hydraulic design, eliminating circuitous routing of feed pipes from inlet structures to entry point of a header pipe. StormChamber was designed as an open bottom, high-density polyethylene infiltration chamber ...

    By HydroLogic Solutions, Inc based in Occoquan, VIRGINIA (USA).

  • L & M - Non Woven Geotextiles Fabrics

    Non woven Geotextiles Fabrics are probably the most commonly known geotextiles. Nonwoven polypropylene fabric, which has a felt-like consistency, combines strength and flow ability. Available in varying weights and thicknesses, the fabrics are strong but permeable, allowing for varied uses. Nonwoven fabrics commonly are used as a separator between ...

    By L & M Supply Company based in Willacoochee, GEORGIA (US) (USA). from Geotextiles Product line

  • Netafim - Nylon and PVC Valves

    Nylon and PVC Valves offer structural simplicity and superior hydraulic performance for surface or subsurface agricultural applications. The valves operate by pipeline or external pressure and the reinforced rubber diaphragm seals the water passage when the line pressure reaches the valve’s control chamber. They are simple to install with ...

    By Netafim USA based in Fresno, CALIFORNIA (USA). from Wastewater Division Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you