Suction Pump Equipment
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Final vacuum ‹ 1 mbar. DILO couplings DN20. 550 x 430 x 800 mm, 80 kg. Operating voltage: AC 200-240 V, 50/60 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The mobile suction pump allows upgrading old SF6 maintenance devices. Thus it is possible to recover the SF6 gas from the gas compartment to a final vacuum of 1 mbar by connecting in series the mobile suction ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Oil-free vacuum suction filter pumps are widely used in filtration, sample concentration, solid phase extraction and other devices, and are important basic equipment in the laboratory.Single-stage or two-stage pumps provide a completely clean vacuum environment. The pump body itself requires no maintenance and does not produce ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Efficient and watersaving vacuum generation for hydrolysis. This set includes a Vacuum pump V-100, collection bottles and tubing for water saving vacuum generation for Hydrolysis units as HydrolEx ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
In case a mobile unit is not your preferred choice, it is also possible to install suction pumps in an existing service cart to be able to reclaim gas in accordance with the IEC 62271 ...
-
Manufactured by Ordisibased in SPAIN
Chassis: Polyethylene moulded. Engine pump: Dry rotary piston vacuum pump. Flow: Flow 5.4 m3/h (90 l/min). Max. Vacuum: Vacuum regulator from 0 to 700 mmHg (93.5 kPa). Noise Level: 58 dB. Voltage: 230 V/50 Hz (others under request). Power: 350 VA. Weight: 22 Kg approx. Size: 53 x 43 x 80 cm. Norms: UNE EN 60601 / EN 61000 / UNE EN ISO ...
-
Manufactured by EndoMed Systems GmbHbased in GERMANY
The suction pump VACO SP120 is dedicated to endoscopic procedures. It is equipped with a special system of noise and vibration dampening for an extremely quiet and smooth operation, with an incredibly low noise level of 39,4 dB. This pump is a maintenance-free, reliable and vibration-free device. The main case is made of very sturdy, ...
-
Manufactured by K.H. Brinkmann Pumps GmbH & Co. KGbased in GERMANY
Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without anticorrosion additives. The dimensions are based on standard specification EN ...
-
Manufactured by Hydroflo Pumps - part of the Taco family of companiesbased in USA
Dynamically balanced stainless steel impeller. Close coupled design. DI volutes with threaded connections. Back Pull-out design. "Shower-Curtain" Shield Motor Moisture ...
-
Manufactured by Ordisibased in SPAIN
Chassis:: Moulded composite (NRFV). Engine pump: With membrane, no lubrication. Pump: Flow 800 l/h (13.3 l/min ). Vacuum:: Vacuum regulator to 0-600 mmHg (80 kPa). Collecting flask: Glass collecting flask of 1.6 litres. Voltage:: 230 V / 50 Hz (others under request). Power: 105 VA. Sizes: 34 X 15 X 30 cm. Norms: UNE EN 60601 / EN ...
-
Manufactured by Ensavior Technologies Pvt. Ltd.based in INDIA
, as much as 25% of the total pump flow continuously flushes the seal faces compared to only a few GPM for conventional stuffing box mounted mechanical seals. Seals remain cooler and unwanted debris is flushed away from the mechanical seal faces resulting in longer mechanical seal ...
-
Manufactured by Mid Atlantic Pump & Equipment Company (MAPECO)based in USA
End suction pumps are available in sizes to 6' and include flexible coupled and close coupled configurations. These pumps are widely used in commercial,industrial, and municpal applications as well as OEM. Different packing and seal arrangements are used to meet the requirements of the customer's ...
-
Manufactured by Hayward Tyler Ltdbased in USA
End suction, vertically split, single-stage pump for nuclear auxiliary and radwaste systems. Offers a rugged, reliable design, specifically for nuclear ...
-
Manufactured by Shanghai Guomei Pump Co.,Ltdbased in CHINA
Features: Comply with DIN24255 standard, Back-pull-out design, Wide hydraulic coverage, Low NPSH requirement, High interchangeability- Entire range uses just 4 bearing assemblies, Now type XA has been extended to incorporate 4 new bigger sizes ie. 200/32, 200/40, 250/32 and 250/40,enlarging the performance coverage up to 1080 m3/h flow rate, Flexible shaft seal with mechanical seal as standard ...
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
ISF pumps an end suction pump conforming to ISO 2858 and ISO 5199. Idea pumping solution for demanding applications such as refinery, chemical process and many industrial applications. High efficiency design with low net positive suction head ...
-
Manufactured by Grundfos Pumps Corporationbased in USA
Advanced features incorporated as standard on PACO end suction pumps ensure optimum performance and reliability. These features, as well as optional features that meet specialized needs, are available on the broadest line of high-efficiency pumps offered to the industry. An innovative pump and impeller design produces a ...
-
Manufactured by C.R.I. Pumps (Pvt) Limitedbased in INDIA
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges ...
-
Manufactured by Megator - Pumps 2000based in USA
This portable pumping system with patented peristaltic pump design features super suction, which enables it to process high-viscous, abrasive, and debris-laden liquids. Developed originally for shoreline/pipeline oil spill cleanup, its durability, unlimited discharge capability and portability make it an effective tool for chemical ...
-
Manufactured by Turbosan Turbomakinalar San. ve Tic. A.S.based in TURKEY
NORM series pumps are used for pumping non abrasive, clean and low viscosity liquids which do not content solid ...
-
Manufactured by DAE Pumpsbased in USA
DAE Pumps H430 Flooded Suction Pumps are heavy-duty centrifugal horizontal pumps with a 4-inch intake and a 3-inch discharge that provides a flow rate of up to 1100 GPM. The non-clogging H430 horizontal flooded suction pumps pass solids up to 1.1-inches and are easy to start since they are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you