Only show results in Connecticut? Ok

sump and sewage pump equipment

  • Sump and Sewage Pump

    Four new features have been incorporated into Darling designs to reduce maintenance and repair costs to the very minimum. 1. Adjustment of the impeller for wear at inlet is made in factory and thrust bearing will keep permanent adjustment and will relieve motor from all thrust. 2. A casing wearing ring of bronze is provided to simplify repair work ...

    By Dynapompe Inc. based in Montreal, QUEBEC (CANADA).

  • Wellmaster Little Giant - Sump and Sewage Pump

    Completely Submersible. Uses: Pumping Basements. Excavations. Waste Water And Sewage Handling.

    By Wellmaster Pipe and Supply Inc. based in Tillsonburg, ONTARIO (CANADA).

  • Model SSE33 - 1/3 HP Sump Pump

    1/8” Solids-Handling. 1-1/4” NPT Vertical Discharge. Dual Mechanical Seals. Durable, Stainless Steel Construction. Automatic and Manual Models SSEE33A (Automatic), SSEE33M (Manual)

    By Keen Pump Co. Inc. based in Ashland, OHIO (USA). from Sump and Sewage Pump Product line

  • Model KE4 - 4/10 HP Effluent Pump

    3/4” Solids-Handling. Heavy-Duty Mechanical Seal. Recessed, Clog-Free Impeller. Durable, All Cast Iron Construction. Dependable Operation. Automatic and Manual Models KE4A (Automatic w/ Piggyback Float Switch), KE4M (Manual).

    By Keen Pump Co. Inc. based in Ashland, OHIO (USA). from Sump and Sewage Pump Product line

  • Model MP-3 - Sump/Effluent Pump

    Piggy-back switch design. Pump can be operated manually by overriding the switch. High efficient motor with upper and lower ball bearings. Runs cooler and lasts longer. Vortex impeller, helps prevent clogging. Sealed entry replaceable power cord. Easy to replace in the field. Prevents water from entering motor housing in the event of a cut power ...

    By Milwaukee Pump Company based in Butler, WISCONSIN (USA). from Sump and Sewage Pump Product line

  • Model KE33 - 1/3 HP Effluent Pump

    1/4” Solids-Handling. 1-1/2” NPT Vertical Discharge. Dual Mechanical Seals. Durable, Cast Iron Construction. Automatic and Manual Models KE33A (Automatic), KE33M (Manual)

    By Keen Pump Co. Inc. based in Ashland, OHIO (USA). from Sump and Sewage Pump Product line

  • Model MP-E5 - Effluent Pump

    Piggy-back switch design. Pump can be operated manually by overriding the switch. High efficient motor with upper and lower ball bearings. Runs cooler and lasts longer. Vortex impeller, helps prevent clogging. Sealed entry replaceable power cord. Easy to replace in the field. Prevents water from entering motor housing in the event of a cut power ...

    By Milwaukee Pump Company based in Butler, WISCONSIN (USA). from Sump and Sewage Pump Product line

  • Model MP-S5 - Sewage Pump

    Piggy-back switch design. Pump can be operated manually by overriding the switch. High efficient motor with upper and lower ball bearings. Runs cooler and lasts longer. Cast Iron Vortex impeller, helps prevent clogging. Sealed entry replaceable power cord. Easy to replace in the field. Prevents water from entering motor housing in the event of a ...

    By Milwaukee Pump Company based in Butler, WISCONSIN (USA). from Sump and Sewage Pump Product line

  • Model KE102 - 1HP High Head Effluent Pump

    The KEEN PUMP KE102 high head effluent pump is designed for use in high head pumping applications, including multi-pump collection systems and septic tank effluent pump (STEP) systems. The pump is capable of passing 3/4” diameter solids. The recessed vortex impeller design of the KEEN PUMP KE102 effluent pump provides trouble-free, ...

    By Keen Pump Co. Inc. based in Ashland, OHIO (USA). from Sump and Sewage Pump Product line

  • Model WS1P-TP - Single Phase Simplex Control Panel

    The WS Series single phase simplex control panel will control a 120/208/240V single phase pump in sewage pump chambers, sump pump basins, and lift stations. See Water simplex control panels come standard with a clear front NEMA 4X rated enclosure, an IEC rated contactor, and a motor protective switch. All panels are UL listed for the United States ...

    By See Water, Inc. based in San Jacinto, CALIFORNIA (USA). from Pump Panels Product line

  • Model CPS5 - Submersible Sump/Effluent/Sewage Pump

    The CPS5 Utilizes a High Efficient Oil filled PSC Motor with upper and lower ball bearings. The CPS5 has a Inboard Seal designed for Sewage. Great for Basements, Dewatering, & Septic applications. SSPMA Certified.

    By Champion Pump Co‎ based in Ashland, OHIO (USA). from Sump & Utility Product line

  • NEMA - Model NSP – Series - Simplex Starter Panel

    Motor Controls NSP Series of Simplex Pump Control Panels consist of an NEMA rated Across-The-Line Magnetic motor starter combined with a fusible disconnect switch. NSP come in a variety of UL Type rated enclosure. Typical application for simplex control panels are where a single motor is required to start and stop. Those application can be and not ...

    By Motor Controls, Inc. (MCI) based in Dallas, TEXAS (USA).

  • Simplex - Model ISP – Series - Starter Panel

    Motor Controls ISP Series of Simplex Pump Control Panels consist of an IEC rated motor starter with Class 10 adjustable motor overload and a fusible disconnect switch. ISP comes in a variety of UL NEMA Rated enclosure. Typical application for simplex control panels are where a single motor is required to start and stop. Those application can be ...

    By Motor Controls, Inc. (MCI) based in Dallas, TEXAS (USA).

  • Zabel - Indoor Tank Alert Panel

    Indoor tank alarm with float. This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications. The Tank Alert1 AB alarm system can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds when a potentially threatening ...

    By Zabel Environmental based in Wallingford, KENTUCKY (USA). from Alarms & Control Panels - Alarms Product line

  • Water, Stormwater, and Wastewater Pump

    Barnes (Sewage, sump, effluent and trash handling pumps. Submersible grinder, cutter and wastewater non-clog pumps). Cornell (Clean water and sewage — vertical, horizontal, close coupled or extended shaft high efficiency pumps. Immersible motors, submersible and dry pit pumps). Crown (Self priming pumps, split case pumps, end suction pumps, single ...

    By Weston & Sampson Engineers, Inc. based in Peabody, MASSACHUSETTS (USA). from Equipment Sales Product line

  • Simplex - Model SCP / DCP - Pump Controller

    Northwest Tech-Con System’s model SCP / DCP panels are of the highest quality pump controllers,  built for pump up/pump down residential and commercial sump and sewage applications. A low volt-age module controls starting, stopping and alternation of pumps. For DCPs, a single pump handles  normal flow with the second pump handling ...

    By Northwest Tech-Con Systems Ltd. (NWTC) based in Burnaby, BRITISH COLUMBIA (CANADA). from Pump Controllers Product line

  • Model SDP-S - Sewage Sump Pump

    1” discharge pipe size. Motor with thermic overload protection .Wear resistant shaft and impeller. Available in automatic or manual operation.

    By Shanghai 3S Industries Co., Ltd. based in Shanghai, CHINA. from Sewage Sump Pump Product line

  • Model SDZ-450X - Sewage Sump Pump

    2' NPT discharge pipe size. Motor with thermic overload protection. Wear resistant shaft and impeller. Available in automatic or manual operation.

    By Shanghai 3S Industries Co., Ltd. based in Shanghai, CHINA. from Sewage Sump Pump Product line

  • Discflo - Vertical Dry Pit Pumps

    Vertical Dry Pit Pumps are ideal for heavy-duty sewage, sludge and slurry applications. Discflo manufactures a complete line of sump and dry pit pumps for heavy-duty sewage, sludge and slurry applications. Using the unique Discpac technology, these pumps provide clog-free, low cost, long-lived operation, outperforming progressive cavity, ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • Griffin - Non-Clog Pumps

    Griffin's Non-Clog Pumps are available in 4' to 18' models. These pumps are fully automatic, dry-priming and dry-running, non-clog portable pumps. They operate efficiently under continuous or intermittent flow conditions.

    By Griffin Dewatering Corporation based in Houston, TEXAS (USA). from Pump & Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you