Surface Aeration System Equipment
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: ...
-
Manufactured by Neotech Water Solutions Pvt. Ltd.based in INDIA
What is Surface Aerator? Surface aerators push water from under the water's surface up into the air, then the droplets fall back into the water, mixing in oxygen. The jets of water break the surface with varying degrees of force. There are many types of surface ...
-
Manufactured by Entec International BVbased in NETHERLANDS
Floating design and therefore easy to use anywhere. ENTEC® surface aerators provide an extremely flat and almost horizontal spray of 360 ° around the device. Wide range of applications, from surface water management to activated sludge installations, SBR and MBR ...
-
Manufactured by Scott Aerator Co. LLCbased in USA
Our Solar Sub-Surface Aeration System provides all of the benefits of traditional aeration without the costly batteries, AC wiring, and ongoing expense of grid power. Even during cloudy conditions our Solar Sub-Surface Aeration System provides low-maintenance, high-volume solar ...
-
Manufactured by Scott Aerator Co. LLCbased in USA
Our Solar Sub-Surface Aeration System provides all of the benefits of traditional aeration without the costly batteries, AC wiring, and ongoing expense of grid power. Even during cloudy conditions our Solar Sub-Surface Aeration System provides low-maintenance, high-volume solar ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
The Purestream Sigma low speed surface mechanical aerator is the result of years of development and refinement from hundreds of successful installations. The Sigma aerator offers the user unsurpassed durable construction, flexible design and maximum efficiency for wastewater treatment. These features make the Sigma Aerator the ...
-
Manufactured by Etaniv B.Y ltdbased in ISRAEL
FUCHS products stand for quality. Meeting the high-quality standards of wastewater treatment they are distinguished by their sophisticated technology, long service life and economic ...
-
Manufactured by Patrick Charles Pty Ltd. (PCPL)based in AUSTRALIA
The Aspiro plus is the latest development from PCPL.The ASPIRO PLUS supplies air below the water surface and transfers it into a highly mixed horizontal water stream not unlike the wake of a boat. This efficiently mixes air and water into the lagoon, tank or other basin that requires it. The development of the ASPIRO PLUS sees higher ...
-
Manufactured by Otterbine Barebo Inc.based in USA
The Aspirator transfers oxygen from the water’s surface into the water column through a venturi tube, creating no surface spray. Available in floating Triton and subsurface Sub-Triton ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
For simple and efficient aeration in municipal and industrial wastewater treatment plants Landustrie supplies two standard aeration rotors: Landy 700 and Landy 1000 resp. with aeration capacities of 54 kgO 2/h and 85 kgO2/h with maximum rotor lengths of 9 m. At special request of our clients these rotors can be supplied with other ...
-
Manufactured by Danish Wastewater Equipment A/S (DWE)based in DENMARK
and functions of aeration systems resulting also in variations with regard to efficiency and investment costs. The Maxirotor Model KD 31, which is a surface aeration system, is one possibility to achieve efficient oxygen supply in sewage ...
-
Manufactured by City Makinebased in TURKEY
Aspirating aerators provide oxygenated air required for treatment in biological treatment units for domestic or industrial wastewaters. In recent years, aspirating aerators are more commonly used in our country than their equivalents such as brush aerators, surface aerators, or blower-diffuser ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
free and have very low operational costs. There is no limit on water depth and no temperature loss as with surface aerators. The Mazzei solution is an all-weather operation that is resistant to corrosion, erosion and abrasion. CONTACT MAZZEI to design a system that solves your odor ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The most recent advancement to surface aerator technology can be seen in the LANDY-7 impeller. The Landy impellers have always incorporated a sturdy design with zero failures due to cracked, sheared, or broken impeller blades. This new impeller increases oxygen transfer efficiency and reduces axial and radial loads. The LANDY-7 ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
Odors caused by septic conditions in equalization basins, lagoons, and ponds can be reduced or even eliminated by using Mazzei’s AirJection® Wastewater Aeration Technology which more effectively aerates. More efficient that other technologies, Mazzei’s systems operate quietly as they have no moving parts so there is ...
-
Manufactured by PMC Engineering Turkeybased in TURKEY
Impeller Diameter from 0.70 M to 3.6. Vertical shaft surface aerators are easily assembled on all types of fixed bridges. If water level is subject to any changes. Suction nozzle below the impeller increases the effective depth. If the ideal water depth is exceeded, the effectivedepth of Vertical shaft surface aerator can be ...
-
Manufactured by KAMPS s.a.based in BELGIUM
aerobic systems. The oxygen that is dissolved in the water is essential for the development of various fauna and flora. The good mixing of water helps the exchanges between oxygen and living organisms. The SOLAIRMAX is an optimised by-product of the high efficiency AIRMAX surface aerator ...
-
Manufactured by Fluidyne Corporationbased in USA
Fluidyne replaced existing surface rotors and mixers with jet aeration / mixing equipment. The upgrade improves nitrogen and phosphorous removal and increasing the organic and hydraulic loading capability through the process while saving ...
-
Manufactured by Lemna Environmental Technologies, Inc. (LET)based in USA
LET Aeration Technologies promote biological oxidation and ensure that all water and microorganisms come into contact with oxygen, delivering maximum wastewater treatment results. LemTec™ Aeration Technologies are a complete line of durable, dependable surface and sub-surface aeration technologies, ...
-
Manufactured by Dynamic Engineersbased in INDIA
Sewage Treatment Plant, or domestic wastewater treatment, is the process of removing contaminants from wastewater and household sewage, both runoff (effluents) and domestic. The task of designing and constructing facilities for treating wastewaters falls to environmental engineers. They employ a variety of engineered and natural systems to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you