surface contaminant equipment in Europe

  • Premium

    STS - Model 6150AD - Simulated Contamination Probe

     The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is designed ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Simulated Contamination Probe Product line

  • Premium

    STS Ludlum - Model 177 Series - Contamination Simulator

    The STS 804 consists of a real Ludlum 177 series with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Contamination Simulator Product line

  • Premium

    PAB-2 - Contamination Smear Test Monitor

    The PAB-2 low background counter measures the alpha and beta contamination of a surface in high gamma background. The PAB-2 contamination controller measures the surface contamination of 51 mm diameter smears, and compares it with the preset radiological contamination thresholds. If there is no smear, it measures the ambient background and ...

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE. from Contamination Smear Test Monitor Product line

  • Premium

    STS Ludlum - Model 811 & 12 - Contamination Simulators

    The STS 811 consists of a real Ludlum Model 12 with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Contamination Simulators Product line

  • Premium

    Eberline - Model STS 801A - Contamination Simulator

    The STS 801A is an exact copy of the Eberline RM14A, entirely built by us. It contains the electronics needed to simulate all the functions of a real RM14 and also to operate the STS probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Contamination Simulator Product line

  • Premium

    STS - Model SMF3 - Whole Body Surface Monitoring Fluorimeter

    The SMF 3 Surface Monitoring Fluorimeter is a whole body dosimeter which is used to study the spreading and penetration characteristics of any hazardous material where quantitative measurements of skin and clothing contamination and absorption are required. These measurements enable the spreading, accumulation and removal of contamination to be ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Whole Body Surface Monitoring Fluorimeter Product line

  • Premium

    Ferrocid/Dilurit - Biocides and Disinfectants for Protecting Water Systems from Biological Contamination

    Industrial water systems often represent an ideal place for the growth and multiplication of microorganisms, due to e.g. the presence of nutrients, favourable temperatures, high residence time and ratio of surface area to system volume. With these conditions, a high bacterial proliferation can lead to biofilm development and subsequent problems ...

  • Mycometer Surface - Mold Contamination Testing Tool

    Mycometer-surface is a versatile analytical tool for testing surfaces and bulk materials for mold contamination on-site. This method was developed by research mycologists at the University of Copenhagen in collaboration with building inspectors and mold remediation specialists. The aim was to specifically develop a method to quantify the level of ...

    By Mycometer based in Horsholm, DENMARK.

  • Premium

    STS - Model 6150ADK - Simulator Probe

    The STS 6150ADK probe is a large area probe, 150mm wide, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 hours of operation. The probe is designed to replicate ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Simulator Probe Product line

  • BactiQuant Surface - Testing Surfaces for Bacterial Contamination

    The Bactiquant-surface is a rapid method for measuring the level of bacteria on surfaces whether they are introduced from flooding or whether they are present due to structural water damage or a generally high moisture content. The method was developed specifically as a tool to investigate surfaces that have been affected by Category 1, 2 & 3 ...

    By Mycometer based in Horsholm, DENMARK.

  • Premium

    STS - Model SPA6 - Simulated Probe

    The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 20 to 25 hours of operation. The probe is designed to ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Simulated Probe Product line

  • Premium

    Anguil - Off-Gas Treatment Systems

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths' surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated ...

    By Anguil Environmental Systems, Inc. Distributor in Ilkley, UNITED KINGDOM.

  • Premium

    Activated Carbon Filters

    Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Activated Carbon Filters Product line

  • Premium

    NANOFER - Model 25S - Aqueous Dispersion of Fe(0) Nanoparticles

    Aqueous dispersion of Fe(0) nanoparticles with biodegradable organic surface modification, which has been designed especially for in-situ groundwater remediation. Frequent target contamination is hexavalent chromium and chlorinated hydrocarbons.

    By NANO IRON s.r.o. based in Židlochovice, CZECH REPUBLIC. from Aqueous Dispersion of Fe(0) Nanoparticles Product line

  • HI-Q - Model FCM-02 - Contamination Monitor

    The FCM-02 Contamination Monitor is used to measure the surface contamination of workers,their clothing, and equipment. Scintillation detectors are used to measure the alpha, beta, and gamma surface activity. The FP series of smart frisking probes are used to detect the surface contamination. The FP series probe has a standard active area of 15.5 ...

    By HI-Q Environmental Products Company Distributor in UNITED KINGDOM. from Contamination Monitor Product line

  • Premium

    Model STS 800 Series - Ionising Radiation Simulants

    The STS 800 Series use unique STS simulants. This technology consists of three parts, simulated contamination and a modified real rate meter or copy of a real model and a simulated probe to detect it. The simulated contamination is a safe liquid - STS LS1 - which can be applied to clothing, equipment, plant and surfaces ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Ionising Radiation Simulants Product line

  • PersulfOx - In Situ Chemical Oxidation (ISCO)

    PersulfOx is an in-situ chemical oxidation reagent that destroys organic contaminants found in groundwater and soil through powerful yet controlled chemical reactions. PersulfOx is a sodium persulfate - based technology which employs a patented catalyst to enhance the oxidative destruction of both hydrocarbons and chlorinated contaminants in the ...

    By Regenesis Office in Bath, UNITED KINGDOM. from In Situ Chemical Oxidation (ISCO) Product line

  • Pentek - Pentek System

    Power 6 tools with 200ft vacuum hoses using a single VAC-PAC. The Pentek System is a fully integrated solution including everything you need for safe remediation of lead paint, concrete or other hazardous materials from contaminated surfaces.

    By Pentek Inc. Distributor in Delft, NETHERLANDS.

  • Constructed Wetlands

    Since the start in 1997 in Wageningen Kilian Water has been engineering constructed wetlands which have a minimum energy requirement and a maximum reliability. Constructed wetlands are natural wastewater treatment systems which are low in energy consumption and which require minimal maintenance. The reason for the low energy ...

    By Kilian Water based in Wageningen, NETHERLANDS.

  • Premium

    Sacrificial Adsorption Systems

    Sacrificial adsorption systems are often used in the odour control of process streams with very low inlet concentrations and for toxic gas polishing.Generally these are fixed bed systems that use activated carbon to remove the contaminant, although other materials are available for specialist applications. The contaminant is adsorbed onto the high ...

    By Environmental Integrated Solutions (EIS) based in Rochdale, UNITED KINGDOM. from Sacrificial Adsorption Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you