Only show results available in Texas? Ok

swarf separator equipment

  • Swarf Separators

    Application: Used to separate turnings, millings and swarf, and mixtures of ferrous and non-ferrous metals such as aluminium, brass etc.Process: The turnings and swarf are transported over a magnetic bed on a feed belt. The iron is magnetised and remains on the belt until ejected into a collection hopper. Non-ferrous fragments fall down directly ...

    By Älmhults El-Mek AB based in Älmhult, SWEDEN.

  • Premium

    Erdwich - Hammer Mills

    ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials - as preparation for downstream separation systems - in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical ...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY. from Hammer Mills Product line

  • PRAB - Horizontal Screw Press

    Disposing hazardous grinding swarf or filter cake can be difficult and expensive. PRAB's horizontal screw press processes material that is 40 to 50% wet with coolant or cutting oils to remove up to 85% of fluid.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Horizontal Screw Press Product line

  • Model GMS - Chip Wringer / Centrifuge

    Chip Wringer separates the any kind of swarf  formed in metal removing processes through a sheet metal filter from the oil.These oil on the swarf made it contamined(dangerous waste). After centrifuge process the oil percentage is %1-4 and swarf is not contamined. Horizantal,vertical ,45 degree mounted;pnomatic  and gravital output  ...

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Chip Wringer / Centrifuge Product line

  • Freddy - Model KSV45 - Swarf Vacuum

    The Freddy KSV vacuum is a portable vacuum designed to pick up swarf.  The KSV/W is designed to pick up engineering coolant (suds), metal chippings and swarf (but not spirals). The KSV/C is designed to pick up metal chippings and swarf (but not spirals) where there is little or no liquid present. The KSV/W has a perforated steel basket with a ...

    By Freddy Products Ltd based in Pershore, UNITED KINGDOM. from Swarf Vacuum Product line

  • Model MS - Magnetic Separator

    These durable, hard-working, automatic systems are designed to keep your cutting, grinding, drilling, and milling machinery operating at peak performance while keeping the coolant free of swarf, dirt, chips, grit, and other machining by-products. By filtering out harmful contaminants, coolant life is greatly extended saving both coolant ...

    By Graymills Corporation based in Broadview, ILLINOIS (USA). from Magnetic Separator Product line

  • Demag - Coolants Magnetic Separator

    DEMAG is a coolants magnetic separator able to filter metallic machining swarf. The rotating magnetic discs system, suitable for magnetic particles only,. Has very low running costs as it does not employ consumable material, and allows separated waste disposal.

    By LOSMA S.p.A. based in Curno, ITALY. from Coolants Magnetic Separator Product line

  • Bar End Separator

    Bar ends, any kind of tramp materials, cutting tools  in the swarf after metal removing processes are separated through bar end separator. Aim is to prevent the harm of the cutting tools in a crusher  or unbalance of the  centrifuge. Bar end separators can be manufactured in accordance with the process requirements  in very ...

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Bar End Separator Product line

  • Maxflow - Model CS 1000-503 - Automatic Backwash Filter with Integrated Briquetting

    The Maxflow Compactsystem CS 1000-503 is an automatic filter system with integrated briquetting for the filtration of cooling lubricants. With this system, oils and water-based cooling lubricants can be filtered down to a separating limit of ≥ 5 µm using cake filtration. Filtration is performed without adding filtration aids. The grinding ...

  • Model GRU-60 to GRU-3000 - Grinding Oil-/ Metal Swarf Recycling Units

    Do you want to recover your precious metal and cooling lubricant feedstock? - We offer the solution: The solvent extraction units of the GRU series have been designed for the de-oiling of metal swarfs. With this units metal swarfs can be de-oiled up to a residual oil content of 0,01%. First, the grinding oil mixture is flooded with solvent. Then, ...

    By DesbaTec Anlagentechnik GmbH based in Sulzbach am Main, GERMANY. from Grinding Oil-/ Metal Swarf Recycling Units Product line

  • Swarf Handling Systems

    Aluminium, steel  and the other material swarf  are separated from the cutting oil and pure oil via chip washing system. Loaded chips to the screw conveyor  are washed with the pressurized water and oil removing  detergant coming through the nozuls or in dipping bed. The fluid passes through a collecting tank.

    By Gökmasan Ltd. based in Nilüfer, TURKEY. from Swarf Handling Systems Product line

  • Chip Wringer Screens

    Chip Wringer Oil Screens are used in chip processing centrifuges to separate residual machining fluids (coolants and oils) from metal chip waste (swarf). Significant cost reduction results from reclaiming machining fluids. In addition, a drip-free metal waste product commands a premium market price. U.S. Screen Company supplies a wide variety of ...

    By U.S. Screen Company based in Wellington, OHIO (USA).

  • Filtra Systems - Model PV-50 - Standalone Machine Tool Coolant Filter

    Filtra-Systems' PV-50 is a complete, turnkey liquid and air filtration solution for grinding and honing CNC machine tools. The PV-50 is a vacuum filter that provides coolant or oil at the flow rate, pressure, temperature and clarity that the machine tool requires. Our Gen II Mist Collector system is attached to the PV-50. The Gen II Mist Collector ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from Standalone Machine Tool Coolant Filter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you