Syringe Filter Equipment
-
Manufactured by Labbox Labware, S.L.based in SPAIN
Ideal for aqueous based samples and suitable for all those applications in which the maximum recovery of proteins is required. Membrane made of Cellulose Acetate (CA) inherently hydrophilic. Low protein retention. High mechanical strength. Housing: Polypropylene (PP), fuchsia color. Designed with connectors: FLL/MSL. Sterile reference is individually packed and sterilized by Gamma Radiation. ...
-
Manufactured by Cytivabased in USA
Whatman ReZist range of syringe filters has been specifically designed to be resistant to organic solvents. These filters are highly suitable for the clarification of aggressive organic solvents. ReZist 30 mm filters can also be used as a venting filter for small ...
-
Manufactured by LuoRon Biotech Co., Ltd.based in CHINA
*The pinhead filter consists of three parts: a ring shell, an interface lock connector and a filter membrane. During filtration, the mesh on the interlock connector acts as a drain for the liquid, which enables the liquid to spread evenly throughout the filter, maximizing the use of the filter membrane. *There are five types of ...
-
Manufactured by Tianjin Fuji Science & Technology Co., Ltd.based in CHINA
Material shell: Medical level polypropylene. Pre- filter: Glass fiber 、Polypropylene fiber. Membrane: Poly tetra fluoro ethylene ptfe(PTFE). Connection inlet: Female Luer-loc. Outlet: Male Luer slip . Filtration area: 0.78cm2(Ø13mm), 3.8cm2(Ø25mm). Hold-up volume: After air ...
-
Manufactured by Tianjin Fuji Science & Technology Co., Ltd.based in CHINA
Material shell: Medical level polypropylene. Pre- filter: Glass fiber 、Polypropylene fiber. Membrane: Mix cellulose(MCE). Connection inlet: Female Luer-loc. Outlet: Male Luer slip. Filtration area: 0.78cm2(Ø13mm), 3.8cm2(Ø25mm). Hold-up volume: After air purge, less than ...
-
Manufactured by Dikma Technologies Inc.based in USA
Particulates can damage expensive equipment, valves, columns and pumps. They can also lead to erratic analytical results. Pre-filtering samples prior to analysis is critical in preventing column and frit blockage, undue wear on valve seals, and abnormally high operating pressures. ProMax syringe filters are designed for economical, ...
-
Manufactured by Cytivabased in USA
Whatman Anotop 10 IC syringe filters from Cytiva Healthcare’s Life Sciences business are designed for efficient filtration prior to ion chromatography. Each batch is certified for low levels of anion leaching in ion chromatography (IC) filtration. Filters large particulates, extending column life and increasing peak resolution. Narrow ...
-
Distributed by InnoTech Instrumentation Co., Ltdbased in CHINA
High qualtiy with competitive prices Supply to over 20 countries Polypropylene housing Membrane selection: Nylon, PTFE, PVDF, PES and MCE Diameters available in 4mm, 13mm, 25mm and 30mm Pore size: 0.22um and ...
-
Manufactured by General Separation Technologies, Inc.based in USA
GS-Tek offers a large variety of Syringe Filters. Below is a list of all of the syringe filters that we sell: Nylon membrane, PTFE membrane, PVDF membrane, cellulose membrane, acetate cellulose membrane, glass fiber ...
-
Manufactured by Phenomenex, Inc.based in USA
Rapidly remove particulates from sample ...
-
Manufactured by Interchimbased in FRANCE
Uptidisc Bio Gmf 25mm 2.0um Syringe Filters. Pack : 01 x 100 ...
-
Distributed by Frisenette ApSbased in DENMARK
Non-sterile Q-Max RR Syringe Filters consists of 13 mm and 25 mm filters with a choice of seven different build-in filtration media. Six membrane types and two types of glass micro fi bers (GF) are available. Each filtration media type, has its own colour code. Pore size (nominal retention for GF) is printed on each filter. ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
Syringe ...
-
Manufactured by I.W. Tremont Co., Inc.based in USA
High quality and cost effective syringe filters are available in a broad range of membrane materials with sterile and non-sterile packaging ...
-
Manufactured by Tianjin Fuji Science & Technology Co., Ltd.based in CHINA
Material shell: Medical level polypropylene. Pre- filter: Polypropylene fiber. Membrane: Polyethersulfone(PES). Connection inlet: Female Luer-loc. Outlet: Male Luer slip . Filtration area 0.78cm2(Ø13mm), 3.8cm2(Ø25mm). Hold-up volume: After air purge, less than ...
-
Manufactured by Topscien Instrument (Ningbo) Co..Ltdbased in CHINA
TOPSCIEN syringe filters are disposable laboratory consumable for filtration of aqueous solutions in four types of membranes : PES . MCE , PVDF and NYLON.Accordingly . four color housings mate with these membranes for easy identificat For pore size of membrane filter , two sizes are available of 0.22 um and 0.45 um . Housing diameter ...
-
Distributed by Frisenette ApSbased in DENMARK
The Advantec range of DISMIC syringe filters is versatile in terms of volume to be filtered and which kind of liquids to be ...
-
Manufactured by Interchimbased in FRANCE
Uptidisc bio gmf 25mm 1.0um pp housing syringe filters. Pack : 01 x 100 U. ...
-
Manufactured by Thomson Instrument Companybased in USA
Thomson offers a comprehensive range of non-sterile disposable syringe filters for reliable sample preparation. Automated manufacturing processes insure membrane quality so particulates are removed from every sample, extending analytical column lifetime and minimizing injection valve ...
-
Manufactured by Tianjin Fuji Science & Technology Co., Ltd.based in CHINA
Material shell: Medical level polypropylene. Pre- filter: Polypropylene fiber. Membrane: Nylon(NYL). Connection inlet: Female Luer-loc . outlet: Male Luer slip . Filtration area: 0.78cm2(Ø13mm), 3.8cm2(Ø25mm). Hold-up volume: After air purge, less than 30ul(Ø13mm), ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you