tank level control equipment in Michigan

  • RTM - Model LS-300 - Pump Level Switch

    RTM's Pump Switch is a non-contact level sensor that controls wastewater pumps. You simply plug your pump into the LS-300 and the sensor turns your wastewater pump on when the liquid level rises to Level 1 and off when the wastewater lowers to Level 2. The switch shown above turns the pump on with 3' of liquid and off with 1' of liquid in the tank ...

    By Remote Tank Monitors L.L.C. based in Saginaw, MICHIGAN (USA).

  • LTC - Model RG 6400 - Rock Grinder

    Effective Dust Control with Low Water Volume, Volume Adjustable to Accommodate Changing Conditions, Water Pump Driven from Tool Carrier Hydraulic System, 350 or 500 Gallon Tanks Available, Ground Level Water Tank Filling System

    By Lang Tool Co. based in Beaverton, MICHIGAN (USA).

  • Bubbler System

    The Bubbler systems are ideal for level measurement of open channel run off systems or duct and tank situations where debris, foam, steam or surface turbulence makes standard methods of level measurement impractical. From the simplest float control panels to systems handling multiple, large horsepower, heavy flow pumping systems. Whether you need ...

    By Process Controls & Instrumentation based in Detroit, MICHIGAN (USA).

  • Jetech - Electric Pumping Systems

    Jetech electric pumping systems are used worldwide in the contracting and process industries. Electric units are typically PLC controlled and highly customizable to fit your needs. Jetech electric pumping systems include inlet water tanks and charge pumps to ensure proper suction conditions. System protections are standard on all Jetech units; ...

    By Jetech Inc. based in Battle Creek, MICHIGAN (USA). from Electric Pumping Systems Product line

  • Premium

    Grande - Model SURE-FLOAT - Floating Regulator System

    The SURE-FLOAT Floating Regulator System is designed to maintain a constant and accurate flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels varying from 0 to 20 feet (6 m). The SURE-FLOAT Floating Regulator has been used for flow control from settling ponds, tailings ponds, sedimentation tanks, storm ...

    By Grande Water Management Systems Distributor in MICHIGAN (USA). from Floating Regulator System Product line

  • Premium

    Grande - Model SURE-FLAP - Check Flap System

    The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is ...

    By Grande Water Management Systems Distributor in MICHIGAN (USA). from Check Flap System Product line

  • Premium

    Grande - Model ACU-FLAP - Check Element System

    The ACU-FLAP Check Element System is designed to prevent flooding and backflows caused by high downstream water levels. The ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants ...

    By Grande Water Management Systems Distributor in MICHIGAN (USA). from Check Element System Product line

  • Premium

    Grande - Model ACU-BEND - Bending Weir System

    The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design ...

    By Grande Water Management Systems Distributor in MICHIGAN (USA). from Bending Weir System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you