Thermal Oxidation Equipment Near Benin
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor (or enclosed flare) can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON’s FIRECAT Thermal Oxidizers are combustion devices that maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98 - 99.9%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. This ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct ...
-
Manufactured by Nehlsen AGbased in GERMANY
Mechanical-biological stabilisation/treatment (MBS/MBT) plants are used to treat household and commercial waste in order to gain an organically stable fraction that can be disposed of ...
-
by Waterleaubased in BELGIUM
The PUTTART vertical dryer-granulator is a high capacity installation for simultaneous sludge drying and granulating and can be used for municipal and industrial sludge. The unique drying-granulating combination results in a valuable pathogen-free, easy storage fertilizer end-product. ...
-
Manufactured by Dürr Systems, Inc.based in USA
Alongside complete Air Pollution Control Systems, Dürr also provides additional parts for upgrading existing systems. These may have been originally supplied by Dürr or by other manufacturers. Because the Oxi.X burner system is used for the combustion of pollutants, it falls into the category of thermal processes for Air ...
-
Manufactured by Dürr Systems, Inc.based in USA
The patented technology of thermal oxidation for siloxane containing gases. During the oxidation of siloxane-laden exhaust, silicon dioxide (SiO2) will be created. This tends to be very sticky and fluffy in nature and typically results in clogging of the heat exchanger media in regular RTO systems. DeSiTHERM™ avoids this problem ...
-
Manufactured by Dürr Systems, Inc.based in USA
Sorpt.X SB biogas purification systems use only water to remove CO2, H2S, and light siloxanes from digester, wastewater treatment, landfill, or other biogas streams. Sorpt.X SB systems capture more than 98.5 percent of the methane and purify it to pipeline quality natural ...
-
Manufactured by Dürr Systems, Inc.based in USA
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
-
Manufactured by Dürr Systems, Inc.based in USA
Classic OxiTHERM thermal oxidation technology compromises a combustion chamber - with a refractory fibre or brick lining - and a burner to oxidise VOC at temperatures >800°C. The installed burner system can also handle ex-rated waste gas streams. Downstream, the energy in the clean hot gas can either be used within the process to ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RL is a unique regenerative thermal oxidizer with a rotary distributor valve that is capable of removing more than 99% of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and odors from industrial exhaust gas flows. The Oxi.X RL is based on the thermal ...
-
Manufactured by Dürr Systems, Inc.based in USA
By introducing a catalyst, thermal oxidation occurs at lower temperatures in the range between 450 and 600°C. This reduces the required energy. For small applications an electric heater can be used in the OxiTHERM™Cat oxidiser system instead of a ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in a variety of industry sectors to purify exhaust air containing solvents and odors. Highly efficient regenerative thermal processes contribute significantly toward environmental protection. The RTO systems in Dürr’s Oxi.X RK series are designed for low and medium pollutant ...
-
Manufactured by Dürr Systems, Inc.based in USA
SCR Air Pollution Control Systems used for the selective catalytic reduction of nitrogen oxides (NOx) in flue gases and process exhaust gases when high nitrogen oxide conversion rates needed. They can be installed in Oxi.X DF (direct-fired thermal oxidizer) systems for flue gas purification or used as stand-alone units. As their ...
-
Manufactured by Dürr Systems, Inc.based in USA
The most universally-used thermal oxidation technology with lowest operating costs owing to integrated heat recovery. This is achieved via batch usage of at least two regenerator chambers filled with ceramic heat storage media. These are used to preheat the waste gases and to recover the energy from the combustion process. A burner is ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X TR system is a recuperative thermal oxidizer that has been used for more than 40 years to remove a variety of pollutants from exhaust air. These systems are generally suitable for exhaust air volume flows of 1000 Nm3/h or more and use a thermal ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in many different industry sectors to purify exhaust air containing solvents and odors. This highly efficient regenerative thermal process contributes significantly toward environmental protection. The Oxi.X RA RTO series is especially suited to large exhaust air flow rates, high exhaust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you