Thermal Oxidation Equipment Near Croatia
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor (or enclosed flare) can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON’s FIRECAT Thermal Oxidizers are combustion devices that maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98 - 99.9%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. This ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters ...
-
Manufactured by Muntersbased in USA
The most fuel efficient configuration is to integrate Zeolite rotor concentrators with a Regenerative Thermal Oxidizer (RTO) for VOC destruction. Dual Chamber RTOs with 95% primary heat recovery and flameless Natural Gas Injection (NGI) can operate autothermally with highly concentrated VOC streams from concentrators. High airflow ...
-
Manufactured by Durag Groupbased in GERMANY
Predictive Emission Monitoring Systems (PEMS) are an innovative and cost-effective approach to continuously monitor source emissions as alternative to Continuous Emissions Monitoring Systems ...
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
based in AUSTRIA
The perfect CTP-solution for combined cleaning of low laden organic waste gas flows and high caloric off gas and/or liquids even without LEL protection. The Hybrid-RTO is especially suitable for small flows at concentrations > LEL, which occur continuously or discontinuously. Design of the raw gas injection is possible in ...
-
based in AUSTRIA
The perfect CTP-solution for a combined cleaning of organic pollutants (RTO) and nitrogen oxides (SCR) at high efficiencies. The RTO-i-SCR is suitable for flow rates up to 300.000 Nm³/h at raw gas temperatures up to ...
-
based in AUSTRIA
The perfect CTP solution as an air pollution control treatment for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to ...
-
based in AUSTRIA
The VOCNOxTherm system combines low operating costs and excellent cleaning efficiency of an RTO with the NOx reduction of an SNCR. In several applications the VOCNOxTherm eliminates the need for an additional and complete SCR ...
-
based in AUSTRIA
The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125.000 Nm³/h, with a wide variety of concentrations and contaminants. For waste gas temperatures from -20°C up to ...
-
based in AUSTRIA
For safe removal of highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters, especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process. It consists essentially of a thermal oxidation and one or more upstream or downstream processes ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being ...
-
Manufactured by LINSEIS Messgeräte GmbHbased in GERMANY
for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you