Thermal Oxidation Equipment Near Estonia
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
Manufactured by Vaisalabased in FINLAND
The Vaisala CARBOCAP® MGP262 continuously measures the methane concentration in offgas from your biogas upgrading unit to keep you from letting your profits go up in the air. ...
-
Manufactured by Genano Industrial Air Purification Solutions - Genano Ltd.based in FINLAND
Genano RCO VOC series are state-of-the-art compact catalytic VOC and odor abatement systems for energy efficient control of VOC emissions. It fulfills the requirements of the EU VOC ...
-
Manufactured by Durag Groupbased in GERMANY
Predictive Emission Monitoring Systems (PEMS) are an innovative and cost-effective approach to continuously monitor source emissions as alternative to Continuous Emissions Monitoring Systems ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Compact TDL combustion series measures O2, CO and CH4 offering unique features and low cost of ownership. The SERVOTOUGH Laser 3 Plus is a revolution in Tunable Diode Laser (TDL) Absorption Spectroscopy analysis: a highly compact gas monitor for in-situ cross stack applications, which delivers exceptional performance benefits in a revolutionary compact ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Compact TDL analyzer offers unique features low cost of ownership, with fast response to measuring ammonia in DeNOx applications. The SERVOTOUGH Laser 3 Plus Ammonia is a revolution in Tunable Diode Laser Absorption Spectroscopy analysis: a highly compact gas monitor for in-situ cross-stack applications, which delivers exceptional performance benefits in a revolutionary compact ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters ...
-
Manufactured by Muntersbased in USA
The most fuel efficient configuration is to integrate Zeolite rotor concentrators with a Regenerative Thermal Oxidizer (RTO) for VOC destruction. Dual Chamber RTOs with 95% primary heat recovery and flameless Natural Gas Injection (NGI) can operate autothermally with highly concentrated VOC streams from concentrators. High airflow ...
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
based in AUSTRIA
The perfect CTP-solution for combined cleaning of low laden organic waste gas flows and high caloric off gas and/or liquids even without LEL protection. The Hybrid-RTO is especially suitable for small flows at concentrations > LEL, which occur continuously or discontinuously. Design of the raw gas injection is possible in ...
-
based in AUSTRIA
The perfect CTP-solution for a combined cleaning of organic pollutants (RTO) and nitrogen oxides (SCR) at high efficiencies. The RTO-i-SCR is suitable for flow rates up to 300.000 Nm³/h at raw gas temperatures up to ...
-
based in AUSTRIA
The perfect CTP solution as an air pollution control treatment for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to ...
-
based in AUSTRIA
The VOCNOxTherm system combines low operating costs and excellent cleaning efficiency of an RTO with the NOx reduction of an SNCR. In several applications the VOCNOxTherm eliminates the need for an additional and complete SCR ...
-
based in AUSTRIA
The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125.000 Nm³/h, with a wide variety of concentrations and contaminants. For waste gas temperatures from -20°C up to ...
-
based in AUSTRIA
For safe removal of highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters, especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process. It consists essentially of a thermal oxidation and one or more upstream or downstream processes ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
CS Combustion Solutions builds hot gas generators based on many years of experience and further development. The hot gas generators are used where products have to be dried or plant components such as catalysts have to be heated up and brought to temperature. ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
As a result of several customer requests, CS Combustion Solutions has developed a unique nozzle that combines all the advantages of a typical ultrasonic nozzle with a significantly reduced atomiser requirement of approximately 50%. JULIP has enormous potential - reducing operating costs while improving the efficiency of thermal ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor (or enclosed flare) can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you