Thermal Oxidation Equipment Near Uganda
-
Manufactured by PAC L.P. A Roper Companybased in USA
The Alcor VTR-100 (Visual Tube Rater) is used to manually rate heater tube deposits formed during a jet fuel thermal oxidation test. Manual visual rating is the only approved heater tube deposit rating technique allowed in ASTM D3241 and IP323. The heater tube is attached to a holder and inserted in the VTR-100, along with the ASTM Color ...
-
Manufactured by Muntersbased in USA
The most fuel efficient configuration is to integrate Zeolite rotor concentrators with a Regenerative Thermal Oxidizer (RTO) for VOC destruction. Dual Chamber RTOs with 95% primary heat recovery and flameless Natural Gas Injection (NGI) can operate autothermally with highly concentrated VOC streams from concentrators. High airflow ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters ...
-
Manufactured by Nehlsen AGbased in GERMANY
Mechanical-biological stabilisation/treatment (MBS/MBT) plants are used to treat household and commercial waste in order to gain an organically stable fraction that can be disposed of ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON’s FIRECAT Thermal Oxidizers are combustion devices that maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98 - 99.9%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. This ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor (or enclosed flare) can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct ...
-
Manufactured by NIRA New Instruments and Research for Analysisbased in ITALY
Our FID LEL proposes some innovative technical characteristics, which allow continuous measures of total hydrocarbon ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Compact TDL analyzer offers unique features low cost of ownership, with fast response to measuring ammonia in DeNOx applications. The SERVOTOUGH Laser 3 Plus Ammonia is a revolution in Tunable Diode Laser Absorption Spectroscopy analysis: a highly compact gas monitor for in-situ cross-stack applications, which delivers exceptional performance benefits in a revolutionary compact ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Compact TDL combustion series measures O2, CO and CH4 offering unique features and low cost of ownership. The SERVOTOUGH Laser 3 Plus is a revolution in Tunable Diode Laser (TDL) Absorption Spectroscopy analysis: a highly compact gas monitor for in-situ cross stack applications, which delivers exceptional performance benefits in a revolutionary compact ...
-
based in AUSTRIA
For safe removal of highly contaminated, i.e. halogenous, waste gas streams and liquid waste as well as wastewaters, especially in the pharmaceutical, chemical and petrochemical industry. CTP‘s MultiTherm is a combined process. It consists essentially of a thermal oxidation and one or more upstream or downstream processes ...
-
based in AUSTRIA
The VOXcube purifies organic (VOC) and specific inorganic pollutants in the waste gas. The system is suitable for flow rates up to 125.000 Nm³/h, with a wide variety of concentrations and contaminants. For waste gas temperatures from -20°C up to ...
-
Manufactured by LINSEIS Messgeräte GmbHbased in GERMANY
for EGA (Evolved Gas Analysis). The instrument is highly suitable for thermal composition, thermal stability and oxidation ...
-
based in AUSTRIA
The perfect CTP-solution for a combined cleaning of organic pollutants (RTO) and nitrogen oxides (SCR) at high efficiencies. The RTO-i-SCR is suitable for flow rates up to 300.000 Nm³/h at raw gas temperatures up to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you