thermal oxidizer equipment available in Serbia

  • Thermal Oxidation

    Thermal oxidation is the incineration of solvents, hydrocarbon vapours, fumes and odours. The temperature of the waste gases is heated to a temperature of 750 to 1100°C by a gas or oil fired burner which fires into a ceramic lined combustion chamber. This is fitted with internal baffling to provide the necessary mixing and residence time ...

    By ACWA Services Ltd based in Skipton, UNITED KINGDOM. from Thermal Oxidation Product line

  • Thermal Oxidizer

    A Thermal Incinerator, also known as Vapor Combustor Unit (VCU) designed and manufactured by Combustion Research Associates acts as an emission and pollution control device to curb industrial pollution in the form of dangerous hydrocarbons such as BTEXs, Sulphur & Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs).​ Our Thermal ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • Tarmac - Model SR-103 - Thermal Oxidizer

    Operating Temper: 1,400 – 1,800 °F. Maximum Burner Capacity: 65 mmBTU per Hour. Shell Material: Carbon Steel. Outside Diameter: 10’ O.D. Inside Diameter (I.D. Refractory): 8’ 6” I.D.. Exhaust Gas Volume: 100,000 – 170,000 ACFM. Oxidizer Refractory Type: 9' Pyroblock.

    By Tarmac International, Inc. based in Lees Summit, MISSOURI (USA). from Thermal Oxidizer Product line

  • Thermal Oxidizers

    In units with thermal oxidizers, undesired gaseous or liquid by-products from technical processes will undergo thermal post-treatment for primarily ecological reasons. Such by-products and pollutants may be toxic or explosive and have differing net calorific values so that the firing system, combustion chamber and waste heat boiler each have to be ...

    By VKK Standardkessel Köthen GmbH based in Köthen, GERMANY. from Thermal Oxidizers Product line

  • Thermal Oxidizer

    Thermal oxidizers are used to reduce or totally eliminate air pollution from process industries where emitted gases can carry substantial amount of polluting components in its stream. The challenge of burning /combusting small percentage of pollutant in large flow of gases needs special treatment inside a thermal oxidizer. Both recuperative and ...

    By Puti Energy based in Bhosari, INDIA.

  • Stelter - Thermal Oxidizers

    S&B'sThermal Oxidizersare for industrial odor, fume, or emissions abatement applications. Some industries that employ thermal oxidizers include: adhesive, aluminum and steel, asphalt, bakeries, chemicals, coatings, electronic part manufacturing, plastics, pulp and paper, wood products manufacturing and more! These industrial pollution control ...

    By Stelter & Brinck, Ltd based in Harrison, OHIO (USA). from Thermal Oxidizers Product line

  • TKS Industrial - Regenerative Thermal Oxidizer

    A TKS Regenerative Thermal Oxidizer (RTO) is designed to destroy VOCs/HAPs or other airborne solvents from industrial processes such as automotive paint booths. An RTO consists of two or more towers which contain specialized thermal ceramic material, connected at the top by a high-temperature direct-fired burner. RTOs are the most popular form of ...

    By TKS Industrial Company based in Troy, MICHIGAN (USA).

  • Premium

    ERG - Thermal Oxidisers

    Thermal oxidation is a well-accepted method of treatment of exhaust gas containing volatile organic compounds. Thermal oxidation can also be very effective in treating liquid waste streams.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Oxidisers Product line

  • Premium

    AEREON - Halogenated Thermal Incineration Systems

    AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence time.

    By AEREON based in Austin, TEXAS (USA). from Halogenated Thermal Incineration Systems Product line

  • Showcase

    Anguil - Emission Concentrator with Integrated Oxidizer

    Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil rotor concentrator is an adsorption system designed to concentrate large volume, low ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Emission Concentrator with Integrated Oxidizer Product line

  • Landfill Gas Thermal Oxidizer

    PCC has been supplying thermal oxidizers to the landfill gas industry for nearly 30 years. Over that period, we have gained the knowledge necessary to provide the most effective and well-engineered solutions to our customers. Our thermal oxidizers can use “street grade” natural gas, raw landfill gas, and/or some of the partially ...

    By Process Combustion Corporation based in Pittsburgh, PENNSYLVANIA (USA). from Landfill Gas Thermal Oxidizer Product line

  • Modular Thermal Oxidizers

    Our Nitrogen Generators operate on Pressure Swing Adsorption, known as PSA Technology. PSA Technology is based on the selective adsorption phenomena of gas molecules under pressure on the surface of highly porous and efficient adsorbent, In the case of Nitrogen Generation the Adsorbent is Carbon-based Molecular Sieve(CMS). When compressed air is ...

    By AirScience Technologies Inc. based in Montreal, QUEBEC (CANADA). from Modular Thermal Oxidizers Product line

  • Catalytic Thermal Oxidizers

    Catalytic oxidizers use a catalyst to reduce the oxidation temperature. Unlike the 1,400F operating temperature of a thermal oxidizer, a catalytic oxidizer can operate at much lower temperatures such as 600-700F. This lower operating temperature can reduce the operating costs and prove to be the most efficient solution. Catalytic oxidizers can be ...

    By TANN Corporation - L&E America based in Kaukauna, WISCONSIN (USA). from Catalytic Thermal Oxidizers Product line

  • Model ET - Combustion for Thermal Oxidation

    There are two practicable ways of oxidizing or burnout systems. On the one hand there are purely oxidation and on the other hand catalytic units. On the oxidation side there are again two processes: thermal and thermal regenerative processes. At the beginning of developing thermal regenerative systems these were meant to be implemented whenever ...

  • Epcon - Model RTO - Regenerative Thermal Oxidizers

    Epcon takes great pride in having excellent Engineering and Manufacturing capability to design and fabricate highly-efficient, high-quality and high-performance Regenerative Thermal Oxidizers (RTO), which always meet or exceeded our customer expectations.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Regenerative Thermal Oxidizers Product line

  • Epcon - Recuperative Thermal Oxidizer

    Epcon is an industry leader in Thermal Oxidizer technology and can design a system to fully integrate a customer's heat Processing Equipment with a Recuperative Thermal Oxidizer. This provides tremendous costs savings with respect to minimizing the use of natural gas and mechanical sub assemblies.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Recuperative Thermal Oxidizer Product line

  • Adwest SATTi - Recuperative Thermal Oxidizers

    Adwest mastered the design of recuperative thermal oxidizers after hundreds of successfully installed systems. Recuperative thermal oxidation systems are often the best technology for waste destruction when moderate levels of VOCs exist in the given liquid or vapor waste stream.

    By CECO Environmental based in Dallas, TEXAS (USA). from Recuperative Thermal Oxidizers Product line

  • Adwest SATTi - Regenerative Thermal Oxidizers

    For very low VOC concentrations, an Adwest Regenerative Thermal Oxidizer (RTO) is capable of 95% destruction efficiency and up to 95% heat recovery. Our two-chamber, industrial RTO is the most cost effective selection. Individual heat recovery chambers are filled with ceramic heat sink media. Incoming VOC laden air enters one of the chambers ...

    By CECO Environmental based in Dallas, TEXAS (USA). from Regenerative Thermal Oxidizers Product line

  • GCES - Model RTO - Regenerative Thermal Oxidizer

    Gulf Coast Environmental Systems designs, builds and installs various types of thermal oxidizers. Matching the right technology with our customers process needs is paramount to any successful abatement project.

    By Gulf Coast Environmental Systems, LLC based in Conroe, TEXAS (USA). from Regenerative Thermal Oxidizer Product line

  • Thermal Oxidizer Systems

    Today’s gas and liquid pollution control applications require the world’s most advanced thermal oxidizer systems to destroy hazardous air pollutants (HAPs) and volatile organic compounds (VOCs) while meeting or exceeding tougher environmental regulations.

    By John Zink Company, LLC based in Tulsa, OKLAHOMA (USA). from Thermal Oxidizer Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you