Thermal Oxidizer Equipment In Asia & Middle East
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants or intermittent batch ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative oxidizers incorporate flexible ...
-
Manufactured by Puti Energybased in INDIA
Thermal Oxidizers are used toreduce or totally eliminate Air pollution from process Industries where emitted gases can carry substantial amount of polluting components in its stream. The challenge of Burning /combusting small percentage of pollutant in large flow of gases needs special treatment inside a Thermal Oxidizer. Both ...
-
Manufactured by Dumag GmbHbased in AUSTRIA
The interaction between the burner and the combustion chamber geometry plays an important role in complying with all the relevant regulations and achieving a process that is optimized in terms of ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
They are installed when there is no need of heat recovery or when this need is not sufficient to justify a heat recuperating oxidizing ...
-
Manufactured by Nacah Tech LLCbased in USA
Popular for higher VOC concentrations, thermal oxidation will combust the VOC gases to achieve very high levels of purity of the vented air. Obvious advantages are non-replacement of the spent carbon ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct ...
-
Manufactured by Dumag GmbHbased in AUSTRIA
The main argument for selecting the regenerative over the recuperative technology is the outstanding heat recovery efficiency which is achieved thanks to the extraordinary surface area of the heat storage media. It can be assumed that regenerative systems easily reach a thermal efficiency of 95% or even higher. This means that heat ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust ...
-
Manufactured by TECAMbased in SPAIN
Regenerative Thermal Oxidizers RTO are the most widely-used oxidation technology nowadays for Volatile Organic Compounds VOC emissions treatment to be used with a wide range of solvents and processes. Tecam Group designs, assembles, commercialises and installs equipment for VOC emissions treatment through Regenerative Thermal ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
. The destruction efficiency of organics, the pressure drop and the thermal recovery efficiency of these last generation two tower RTOs is in each way comparable to the performance of previous generation three tower ...
-
Manufactured by Allied Furnaces Pvt. Ltd.based in INDIA
Suitable for gasses with low VOCs, Gasses are pre-heated in ceramic modules before oxidizing, Direction of flow is reversed using valves/dampers, Ceramic honeycomb modules used as media, High operating economics, 2 bed or 3 bed ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Our Nitrogen Generators operate on Pressure Swing Adsorption, known as PSA Technology. PSA Technology is based on the selective adsorption phenomena of gas molecules under pressure on the surface of highly porous and efficient adsorbent, In the case of Nitrogen Generation the Adsorbent is Carbon-based Molecular Sieve(CMS). When compressed air is used for nitrogen generation, the adsorption towers ...
-
Manufactured by Dürr Systems, Inc.based in USA
Classic OxiTHERM thermal oxidation technology compromises a combustion chamber - with a refractory fibre or brick lining - and a burner to oxidise VOC at temperatures >800°C. The installed burner system can also handle ex-rated waste gas streams. Downstream, the energy in the clean hot gas can either be used within the process to ...
-
Manufactured by Brofind Spabased in ITALY
These oxidizers, equipped with regenerative heat exchangers, are characterised by high thermal efficiency and, in some cases, allow the oxidation process to be ...
-
Manufactured by Brofind Spabased in ITALY
Recuperative thermal oxidizers have an external or integrated thermal recovery section, coaxial with the combustion chamber for energy saving ...
-
Manufactured by Brofind Spabased in ITALY
Direct thermal oxidizers can be considered as normal combustion chambers where the gas stream, pollutant laden, is burned directly without any heat ...
-
Manufactured by Ship & Shore Environmental, Inc.based in USA
S&SE Thermal Recuperative Oxidizers destroy air pollutants emitted from process exhaust streams at temperatures ranging from 1000°-2200°F. A Recuperative Thermal Oxidizer utilize a combustion chamber with multi pass shell and tube type heat exchanger which is fabricated of heavy-duty stainless steel. Temperature, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you