Thermal Oxidizer Equipment In Pennsylvania
-
Distributed by Klaus Equipment Company (KEC)based in USA
Thermal oxidizers are used to reduce air pollution emissions from a variety of industrial processes by treating the polluted exhaust gas prior to discharging the exhaust gas to atmosphere. To destroy the contaminants in a polluted exhaust gas, a thermal oxidizer uses the principle of 'thermal ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
RTOs or Regenerative Thermal Oxidizers are the most energy efficient oxidizer designs. Catalytic Combustion Corporation manufactures RTOs and other thermal oxidizers at the CCC facility in Bloomer, WI. Thermal oxidizers can be direct thermal ...
-
Manufactured by Nacah Tech LLCbased in USA
Popular for higher VOC concentrations, thermal oxidation will combust the VOC gases to achieve very high levels of purity of the vented air. Obvious advantages are non-replacement of the spent carbon ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that need to maximize their space, some thermal oxidation systems can be a heavy burden. Depending on the needs of individual businesses, a regenerative thermal oxidizer or direct-fired thermal oxidizer may be a difficult system to integrate due to the size of units and costs of ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
Regenerative thermal oxidizer (RTO) is a VOC emission control system for process applications with low average VOC ...
-
Manufactured by NESTEC, Inc.based in USA
While EPA, federal and local regulations are generally the same when applied to manufacturers of all types, not all thermal oxidation systems are created equal. Companies that produce HAPs and VOCs as a byproduct of their manufacturing processes often have different needs depending on a variety of factors. Catalytic thermal ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
A recuperative thermal oxidizer is best for process applications with lower flow rates or VOC concentrations above 10% LEL. Applications of a recuperative thermal oxidizer include amine treater off gas, cellulosic ethanol plants, calciner and spray dryer exhaust, and chemical manufacturing ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
This system is a direct fired thermal oxidizer with heat recovery added at the discharge end of the combustion ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON’s FIRECAT Thermal Oxidizers are combustion devices that maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98 - 99.9%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. This ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
Reduce air pollution emissions from a variety of industrial processes. Regenerative Thermal Oxidizers (RTOs) destroy Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOC's) and odorous emissions. PCC's systems achieve emission destruction through the process of high temperature thermal oxidation, utilizing the 3 T's ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by Nacah Tech LLCbased in USA
Recuperative thermal oxidizers best suit VOC laden air streams with sufficient loading that provides more heat than for sound RTO’s operation but insufficient normal loading for DFTO (direct fired thermal oxidizer). Recups reduce the operating costs to an optimum level while not overheating or overloading the ...
-
Manufactured by NESTEC, Inc.based in USA
Though new designs and technologies in thermal oxidation have been discovered since the turn of the century, the core process has existed for decades. Regenerative thermal oxidizers (RTOs) have remained popular for many types of manufacturers due to their longevity, simplicity and immense efficiency. RTOs work by drawing in ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that produce high-VOC emissions, it can be difficult to find the right thermal oxidation system to ensure compliance with the regulations of the EPA or other governing bodies. Many thermal oxidation solutions aren’t equipped to handle high concentrations of VOCs and HAPs over long periods of time and may ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
The simplest type of thermal oxidizer, it does not include any type of heat recovery system to recover a portion of the waste heat generated by the combustion ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
The Vertical Gas Thermal Oxidizer offers the flexibility of a thermal oxidizer (capability to handle higher hydrocarbon concentrations) with the option to be converted to catalytic mode in the field at any ...
-
Manufactured by Nacah Tech LLCbased in USA
Nacah Tech provides the process design, mechanical design, BMS (control system) design, material procurement and fabrication, installation supervision and commissioning of Thermal Oxidizer Systems with many available accessories such as LEL analyzer, flow meters, controls, waste heat recovery, preheaters, flame arrestor, id fan, and stack. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you