Thermocouple sensor equipment in Germany

  • OPTITEMP TC Sensors

    Complete range of temperature thermocouple sensors. Wide variety of process connections. Even cable and surface temperature sensors available. Over 60 years of experience in temperature measurement.

    By Krohne Messtechnik Gmbh & Co. KG based in Duisburg, GERMANY. from OPTITEMP TC Sensors Product line

  • Model UO-A - Umbilical Cord Adapter

    To connect the last impinger to the Umbilical Cord. Comes with Type K a thermocouple sensor.

    By Aer Sampling LLC Office in Cologne, GERMANY. from Umbilical Cord Adapter Product line

  • Reckmann - Model EX - Sensors

    With approval for equipment group I, category M2 and equipment group II, category 1 / 2G, 1 / 2D. Ignition protection type intrinsic safety “i”, category ia. Protection type labeling EEx ia I or EEx ia IIC T4/T6 . Available as flange fitting or as screw fitting. Sensor length up to 8000 mm . With Pt 100 or sheathed thermocouple ...

    By Reckmann GmbH based in Hagen, GERMANY.

  • FW1 Fine Wire Thermocouple

    The FW1 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouple is less susceptible to solar loading; therefore, a radiation shield is not required. One differential analog input per sensor is required.

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from FW1 Fine Wire Thermocouple Product line

  • Model SFS2 Typ M-M12 - Sapflow Sensor

    Sapflow-Sensor Type SFS2 M-M12. Sensor-pair consisting of two needles with copper-constantan-thermocouples, 20mm heating-zone, 70cm connection-cable with Binder-M12-connector. Needs 84mA constant-current-source! Total needle-length 33mm, diameter: 19mm. Incl. 2 aluminium-tubes 2mm diameter and 23mm length.

    By UP Umweltanalytische Produkte GmbH based in Ibbenbüren, GERMANY. from Sapflow Sensor Product line

  • ASPTC-L Aspirated Thermocouple

    The ASPTC is a type E thermocouple housed in a white, elongated radiation shield. The radiation shield reduces solar loading on the thermocouple by drawing air across the measurement junction with a fan. The radiation shield also protects the thermocouple, increasing its durability. Typically, one ASPTC is mounted to each sensor arm in a Bowen ...

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from ASPTC-L Aspirated Thermocouple Product line

  • LINSEIS - Model DSC PT1000 - Differential Scanning Calorimeter

    This product was developed to provide a general purpose TM - DSC with a broad temperature range(-150 – 725°C)for all common applications. Furthermore emphasis was placed on an extremely stable baseline and high reproducibility. The design allows manual and automatic operation. The conception of the cell guarantees maximum mechanical and ...

    By LINSEIS Messgeräte GmbH based in Selb, GERMANY. from Differential Scanning Calorimeter Product line

  • FW05 Type E Fine Wire TC, 0.0005

    The FW05 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouples is less susceptible to solar loading; therefore, a radiation shield is not required. One differential analog input per sensor is required.

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from FW05 Type E Fine Wire TC, 0.0005 Product line

  • FW3 Type E Fine Wire TC, 0.003

    The FW3 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouple is less susceptible to solar loading; therefore, a radiation shield is not required. One differential analog input per sensor is required.

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from FW3 Type E Fine Wire TC, 0.003 Product line

  • AM25T 25-Channel Solid State Multiplexer

    The AM25T sequentially connects up to 25 thermocouples or other low-level voltage output sensors to a common differential channel. The output from this channel is wired to a differential input channel on the datalogger. As the AM25T sequentially changes channels, the datalogger measures the output from each thermocouple in sequence. Type T, E, J, ...

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from AM25T 25-Channel Solid State Multiplexer Product line

  • Premium

    Delta-T - Model STK1-05 K Type - Thermocouple Probe (5m Cable)

    The STK1 is a general purpose probe utilising a nickel-chromium (Chromal)/nickel-aluminium (Alumel), K type, thermocouple sensor. This is contained in a stainless steel sheath of 4.8mm nominal outside diameter, 125mm long, which is, in turn, connected to a two core cable, 5m long.

    By Delta-T Devices Ltd. Distributor in GERMANY. from Thermocouple Probe (5m Cable) Product line

  • Premium

    iTEMP - Model TMT82 - Temperature Transmitter

    Transformation of sensor signals into stable and standardized output signals for all industries. Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), but also resistance and ...

    By Endress Hauser AG Office in Weil am Rhein, GERMANY. from Temperature Transmitter Product line

  • Model 18 C - Cryogenic Temperature Monitors

    We offer cryogenic temperature monitors with eight, four and two multipurpose input channels, supporting diode, platinum RTDs and all other cryogenic resistor temperature sensors, including an optional dual thermocouple input. The temperature range (between 500 mK and 1500 K) depends on the sensor type. A constant voltage AC sensor excitation is ...

    By LOT-QuantumDesign based in Darmstadt, GERMANY. from Cryogenic Temperature Monitors Product line

  • Premium

    Omnigrad - Model S TAF16 - High temperature TC Thermometer

    Applicable for cement production, steel treatment, incinerators and fluidized bed furnaces. Measuring points with extremely high process temperatures require these special thermometers with ceramic or metal thermowells as well as thermocouples made from special metals, such as platinum and rhodium. The thermowell made from special materials ...

    By Endress Hauser AG Office in Weil am Rhein, GERMANY. from High temperature TC Thermometer Product line

  • Eddy Covariance

    An Eddy Covariance Station measures CO2, water vapor, or heat fluxes using the eddy covariance technique. A standard equipment set includes a CSAT3 Sonic Anemometer, a CR5000 Measurement and Control System, scalar sensors (CS7500 Open Path Infrared Gas Analyzer, FW05 fine-wire thermocouple, KH20 Krypton Hygrometer, and TGA100A Trace Gas Analyzer). ...

    By Campbell Scientific, Inc. Office in Bremen, GERMANY. from Eddy Covariance Product line

  • Model GTF 300 - Wire Probe

    The GTF 300 is a NiCr-Ni (type K) wire probe for quick-response measurements in air, gases or liquids. The GTF 300 with option “UV” can be also used for measurements of very small surfaces. For option “UV” (untwisted welded) the measuring point is placed at the sensor tip. The thermocouple consists of two electric lines ...

    By Martens - member of the GHM GROUP based in Barsbüttel, GERMANY. from Wire Probe Product line

  • M&C - Model 70304.2 - Temperature Controller

    Electronic PID temperature controller type 70304.2 with self-optimization and LED display in a rail-mount enclosure, sensor input: resistance thermometer, thermocouple, dimensions (W x H x D): 55 x 75 x 123 mm, 3 relay contacts (NO) available, relais capacity: 250 V AC, 3 A, power: 110-240 V, 50-60 Hz. PID self optimizing temperature controller in ...

    By M&C Products Analysis Technology, Inc. Office in Ratingen, GERMANY. from Temperature Controller Product line

  • Model mLog08.0 - Data Logger

    The mLog 08 data logger family represents a comprehensive set of data logging devices. Rugged, stand alone, low power data logger with Built-in Web Server. 5 multi purpose, full isolated analog input channels, each allowing 1-3 separate voltages to be measured. Capable to connect most types of sensors like thermocouples, RTDs, thermistors, ...

    By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from Data Logger Product line

  • Model 22C - Cryogenic Temperature Controllers

    The different cryogenic temperature controllers Model 22C, 24C, 26 and 32 feature two or four multi-purpose input channels, which support most temperature sensors (silicon diode, ruthenium oxide, platinum RTD, CernoxTM, rhodium iron, germanium, Carbon-GlassTM, GaAlAs diode and thermocouple). They cover a temperature range from 200 mK to 1500 K. ...

    By LOT-QuantumDesign based in Darmstadt, GERMANY. from Cryogenic Temperature Controllers Product line

  • Bachmann - Model AIO 208/ 216 - Universal Input/Output Modules

    The AIO208 and AI0216 modules enable the measuring or output of all standard analog signals. The AIO208 offers 8 channels and the AI0216 16 channels compactly in a single module. The standard signal types for current (0 to 20 mA and 4 to 20 mA) and voltage ranges (±10 V to ±10 mV) allow the connection of a wide range of sensors and ...

    By Bachmann electronic GmbH Office in Rheinbach, GERMANY. from Universal Input/Output Modules Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you