Thermocouple Sensor Equipment Near Netherlands
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The R38 Basic PID Set-point Controller is used in the Apex Ovens together with a thermocouple ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
HD 778TR1, HD 978TR1 and HD 978TR2 are 4…20mA two-wired passive transmitters with a microprocessor. These can be configured for thermocouple sensors type K, J, T and N. They convert the voltage value generated by the thermocouple into an electric linear signal within the 4…20mA range. The use of digital devices obtains ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
The HD2101.1 and HD2101.2 are portable instruments with a large LCD display. They measure. relative humidity and temperature using a Pt100 sensor or thermocouple humidity/temperature. combined probe. Temperature only is measured by immersion, penetration or air contact probes. The sensor can be a Pt100, Pt1000 or Ni1000. When the combined ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
HD 778TR1, HD 978TR1 and HD 978TR2 are 4…20mA two-wired passive transmitters with a microprocessor. These can be configured for thermocouple sensors type K, J, T and N. They convert the voltage value generated by the thermocouple into an electric linear signal within the 4…20mA range. The use of digital devices obtains ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TCAV-L typically provides the average temperature of the top 6 to 8 cm of soil for energy-balance in flux systems. It parallels four thermocouples together into one 24 AWG wire. Each member of a thermocouple pair can then be buried at a different depth. The two pairs are separated at a distance of up to 1 ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW1 is a Type E thermocouple with a 0.001 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW1 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The FW05 is a Type E thermocouple with a 0.0005 in. diameter. It measures atmospheric temperature gradients or fluctuations with research-grade accuracy. The FW05 is compatible with most Campbell Scientific data loggers, and it is often used in eddy-covariance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Transformation of sensor signals into stable and standardized output signals for all industries. Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from RTD sensors and thermocouples, but also resistance and voltage signals ...
-
Manufactured by Camille Bauer Metrawatt AGbased in SWITZERLAND
Temperature controller for machines and systems with central control and display concepts. Connection to central controls via various fieldbus interfaces or integrated service ...
-
Manufactured by Thermo Electric Instrumentation BVbased in NETHERLANDS
Nylon insulated cores, laid parallel and sheathed with an outer jacket of nylon 150° C ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
include a combination of oxygen and another gas. However, other compatible gas sensors arrangements can be specified. Measurable gases include oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), hydrogen (H2), moisture (H2O), ethylene (C2H2), chlorine (Cl2), methane (CH2), nitrous oxide (N2O), nitric oxide (NO), ammonia (NH2), sulfur dioxide ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100 is a high-performance oxygen (O2) analyser fitted with a rugged long-life zirconia sensor on a remote cable, together with a type K thermocouple sensor; allowing direct in-process measurement of oxygen and temperature in the sample gas. The sensors provide fast and accurate analysis over the low ppm oxygen range ...
-
Manufactured by Istec Internationalbased in NETHERLANDS
The TCS580 is an oil-tight thermocouple bearing sensor that measures bearing temperatures on industrial rotating equipment; a key indicator for oil film and bearing health monitoring. Its small sensor tip allows for quick measurements and easy installation, while different cabling options offer excellent durability in harsh environments. ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTITEMP TCA-M10 is a mineral insulated (MI) thermocouple with uninsulated flying wires for installation where connection terminals already exist. The MI cable sensor is particularly suitable for applications where the ambient temperature exceeds the maximum allowable temperature of standard cable material (e.g. in test bench ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTITEMP TCA-M20 is a mineral insulated (MI) thermocouple with insulated flying wires for installation where connection terminals already exist. The MI cable sensor is particularly suitable for applications where the ambient temperature exceeds the maximum allowable temperature of standard cable material (e.g. in test bench ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The STK1 is a general purpose temperature probe based on a nickel-chromium (Chromal)/nickel-aluminium (Alumel), K type, thermocouple sensor (see specification for details). The thermocouple is housed in a stainless steel sheath of 4.8 mm nominal outside diameter, 125 mm long, connected to a 5 m cable. Thermocouple type - ...
-
Manufactured by DEWESoftbased in SLOVENIA
TEDS equipped adapters that turn any of our DSUB9 universal analog input into direct IEPE, charge, thermocouple, shunt, voltage, LVDT or RTD ...
-
Manufactured by Greensilver Germany GmbHbased in GERMANY
The rare gas purification system for any type of optical emission spectrometers. The rare gases are obtained from using different methods and afterward transfer to tankers or cylinders to distribute among various applications. The inert gases in every step of production, transfer and distribution might be contaminated by oxygen, nitrogen, moisture, or other impurities. More than 30 years of ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Yamato muffle furnaces are recognized for their durability and tightly sealed doors which is of utmost importance when the furnace reaches their maximum temperatures of over 1000°C. The FO Series represents the standard type of muffle furnaces that use a microprocessor-controlled thermoregulator characterized by excellent repeatability. They are used for high temperature applications such as ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Yamato muffle furnaces are recognized for their durability and tightly sealed doors which is of utmost importance when the furnace reaches their maximum temperatures of over 1000°C. The FP Series represents the high performance type of muffle furnaces that use a microprocessor-controlled thermoregulator characterized by excellent repeatability. They are used for high temperature applications ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you