Thickener Equipment Near Vanuatu
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
A Belt Filter Press is used for industrial wastewater treatment plant sludge dewatering. The belt press often proves to be one of the most cost effective dewatering options and has an advantage of incorporating an integrated thickening process to allow dewatering of very dilute slurries to form a spadable ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
or viscous sludge streams. Each hopper is fitted with an isolation valve is connected to a single sludge withdrawal manifold for easy transfer of thickened ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
There are over 1000 HUBER thickeners installed worldwide including many in Australia. The rotary screw thickener is designed for thickening of waste activated sludge prior to dewatering or stabilisation at larger STP’s. Good sludge thickening is required as a prerequisite for the efficient further treatment or dewatering of ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
There are over 1000 HUBER thickeners installed worldwide including many in Australia. The rotary screw thickener is designed for thickening of waste activated sludge prior to dewatering or stabilisation at larger STP’s Good sludge thickening is required as a prerequisite for the efficient further treatment or dewatering of ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
be reconfigured into aeration basins or wet weather storage. 90% less footprint than a traditional clarifier or sedimentation tank. Similar suspended solids removal rate. Gravity discharge of sludge to a press for thickening. Significant reduction in construction costs, earthworks and structural works. Up to 15MLD in a single train. Automatic ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The strainpress sludge screen is a pressure-fed inline system for screening any type of sludge, including highly viscous and greasy waste. Efficient and reliable sludge screens for removal of disturbing solids (e.g. plastics, hair and fibres) are necessary to prevent disruption of subsequent sludge treatment processes and ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
The HiFlow lamella separator is suited for use in a number of industrial wastewater applications such as anodisers, glass factories, tunnel construction, groundwater treatment, galvanizing plants, general industrial manufacture, steel, precious metal and ...
-
Manufactured by Hydroflux Industrialbased in AUSTRALIA
minute. The VeeMax sludge plow can be readily adapted to sludge thickening with the addition of the picket fence ...
-
Manufactured by Valmetbased in FINLAND
Disc filters have many applications in pulp and paper mills for stock thickening. They are commonly used in the paper mill as save-alls for the recovery of fiber and filler, and for clarification of whitewater. Modern disc filter save-alls now produce clear and super-clear filtrates for stock dilution and machine showers that minimize ...
-
Manufactured by Valmetbased in FINLAND
Screw pressing applications cover various thickening process needs from sludge dewatering and reject handling to stock ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Digital ISE sensor for NH4 and N03, connectable to the IQ SENSOR ...
-
Manufactured by Ultrawaves Wasser & Umwelttechnologien GmbHbased in GERMANY
The BIOSONATOR compact is a high-power ultrasound system for the treatment of sewage sludge. It has been developed as a plug&play system in order to test initial trial runs in wastewater treatment plants prior to purchase. Before local authority and industrial sludge treatment plant operators decide to use ultrasound in the long-term to treat their sewage sludge, the system is generally ...
-
Manufactured by BOKELA GmbHbased in GERMANY
and ultrafiltration of microfine to nanoscale suspensions. Tasks such as thickening, washing and clarifying are performed by the BoCross Dynamic filter in continuous operation with permanently high throughput rates. The BoCross Dynamic filter has a modular and hermetically sealed construction. It is available with filter sizes from 0.1 m² to 8 m² and can be ...
-
Manufactured by FLSmidthbased in USA
Improve your cyclones’ performance with CycloStack™ and CycloWash™. Boost your cyclones’ dewatering performance with our CycloStack, which attaches to the bottom of a standard cyclone to automatically control the moisture content and discharge concentration of the cyclone underflow. Enhance cyclones’ separation and desliming capabilities with our patented, low-cost ...
-
Manufactured by FLSmidthbased in USA
A heavy-duty slurry pump for tough, abrasive applications; Our KREBS UMD™ centrifugal slurry pump is the most advanced heavy-duty slurry pump available for mill discharge applications. Optimized hydraulic design delivers the highest efficiency and even wear in the most abrasive mining ...
-
Manufactured by Smith & Loveless Inc.based in USA
The Smith & Loveless CLAR-I-VATOR® is a high rate, solids contact clarifier used for economical and efficient chemical precipitation in water and wastewater treatment applications. It combines flash-mixing, flocculation, clarification, sludge collection and sludge thickening in one unit operation and tank suitable for ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Products for reliable sludge level measurement in sedimentation tanks. Sludge level sensors and transmitters help you to pump sludge, not water. They continuously monitor the separation and transition zones of the clarification and settling phases, so that you can operate your process efficiently. Typical installations are at the primary and secondary clarifier of wastewater treatment plants to ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
The belt filter press is composed of two units, the pre-thickener and the sludge press. The pre-thickener performs the initial solid/liquid separation stage, taking sludge solids concentration from 0.5-3% up to 5-15%. AThe dewatering in the press occurs firstly in the low pressure zone, then in the wedge zone and finally in the high pressure ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
Sludge Thickeners are widely used in many wastewater and water treatment plants. They are generally placed before filter presses, belt presses and centrifuges to achieve higher sludge concentration before final dewatering. Sludge thickeners are also used to increase the sludge concentration before biogas reactors, thus enabling the use of ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you