Toxic Gas Equipment Near Eritrea
-
Manufactured by Bacharach, Inc.based in USA
The MGS-150 Gas Detector can meet almost any gas detection need with multiple sensor options for real-time monitoring of refrigerants, oxygen, combustible and toxic gases. It includes user-selectable current or volt analog outputs, allowing connectivity to most BMS, SCADA or central control systems. Status LEDs and a buzzer are ...
-
Manufactured by Bacharach, Inc.based in USA
annual gas calibrations. Infrared sensing technology makes the MGS-250 immune to cross sensitivities to combustible and toxic gas as well as changes in temperature and humidity. Unlike other monitors, its simple-to-use interface gives the user the ability to set all parameters and outputs without opening the unit, moving jumpers, using ...
-
PremiumManufactured by ENVEAbased in FRANCE
, no Toxic Gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), ...
-
Manufactured by Gopani Product Systemsbased in INDIA
The Sure-T Respirator Advanced series imparts complete respiratory safety from all airborne hazards keeping in mind both your safety and your comfort! The filter consists of a complex multi-layered construction of medical grade, non-woven spun bonded and melt blown plies that provide maximum comfort, breathability and excellent ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
in freely accessible gas pipes, assess the risk of explosion and determine whether toxic gases are within the occupational exposure limits (OEL). In the Structure application, the EX-TEC PM 580 displays the carbon monoxide concentration in the room air and triggers an audible and visual alarm if the values are too high. Toxic carbon monoxide is ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Combination measuring devices for gas supply with integrated ethane detector. Products from the EX-TEC HS family combine ergonomics with cutting edge technology. Thanks to its innovative design this range offers the user the right instrument for each different application. All appliances from the EX-TEC HS family meet the requirements of DVGW ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
The Model 418 Dual Beam NDIR has full automatic microprocessor operation with Auto Start-up, Calibration and Range ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Compressed gases are viewed as critical utilities in many industries when in direct product contact or in the clean room environment. Control of the environment where Pharmaceutical and Cosmetic products are manufactured is a key element of ISO and GMP Standards worldwide. The absence of viable contamination is considered a critical quality attribute due to its potential to dramatically impact ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
Manufactured by Machinestalkbased in SAUDI ARABIA
Smart environmental solutions aim to build an integrated system of sensors that measures various environmental readings, such as pollution rates of carbon and toxic gases, levels of harmful radiation and water pollution. Smart environmental solutions are able to measure and monitor the high level of torrents and sensors to monitor the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you