Toxic Gas Equipment Near Jamaica
-
Manufactured by KAMPS s.a.based in BELGIUM
In lagoon and in some lacs and ponds, the organic sludge settle in the bottom reducing the volume of the water ponds. More important, when this sludge is not stabilised it will create odours and process perturbation due to anaerobic sludge.. Anaerobic decay produces toxic gas which will come some or later in the atmosphere. The methane gas ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Highly efficient dry type exhaust gas washing device with selectable adsorbent of activated carbon and four types of chemical adsorbent according to different target ...
-
Manufactured by Electrolytic Technologies Systems LLCbased in USA
Generate Chlorine and Sodium Hypochlorite On-site and On-demand. The Klorigen™ M-Series On-Site Generator is a smaller-scale electrochemical system specifically intended for remote applications and designed for safe and cost effective production of chlorine gas and/or high purity, commercial-strength sodium hypochlorite solution. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
Manufactured by AMETEK MOCONbased in USA
As one of the most widely used gas detection techniques, the Photoionization Detector (PID), is commonly applied in both portable and fixed instruments for detection of a wide variety of organic compounds and some inorganic gases in ambient air. MOCON’s patented, award-winning piD-TECH eVx plug-in sensor provides complete ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9100 on-line gas chromatograph blends state-of-the-art technology with the reliability and flexibility of gas chromatography. Building on decades of experience, this instrument has been designed with key features to meet your application requirements. The GC is specifically designed for sub-part-per billion (sub-ppb) to percent ...
-
Manufactured by 3Mbased in USA
Introducing the MX 32 measurement and alarm unit suitable to protect equipment and personnel in atmospheres that may contain flammable and toxic gases. Available with one or two channels, the MX 32 offers tailor-made detection capabilities and exceptional programming possibilities compatible with a wide range of fixed gas ...
-
Manufactured by 3Mbased in USA
The iTrans fixed-point gas monitor employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. Able to monitor any combination of gases for a specific environment, iTrans utilizes our industry-proven “smart” ...
-
Manufactured by 3Mbased in USA
Designed for use in boiler rooms and parking garages, the new MX 15 controller provides the most cost effective solution for the continuous monitoring of toxic or flammable gases and vapors in ambient air. Easy to install and operate, the MX 15 control unit combined with the OLC(T) 10 detectors provides a low cost solution for ...
-
Manufactured by 3Mbased in USA
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 can satisfy the most demanding safety requirements. Designed to detect toxic gases, oxygen and refrigerant gases, the CTX 300 uses a new sensor for CO2 detection over three different ranges 0-5000 ppm, 0-5% vol. and 0-100% vol. The ...
-
Manufactured by 3Mbased in USA
The CPS car park air monitor accurately and reliably protects the public and employees from airborne toxic gases in parking facilities and tunnels. The system was designed to comply with the high air quality safety standards enforced in such European countries as Germany, the Netherlands and ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Double Weight, Aged Saran Bags: These Saran Gas Sampling Bags are made of a double weight, 2 mil (0.002 inch) thick type 18-100 Saran, specially treated to minimize permeability. Our Saran Gas Sampling Bags are as chemically inert as Teflon Bags, but are less ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
of augmentation, along with the control and reduction of toxic gases common in organic waste under facultative and anaerobic ...
-
PremiumManufactured by Absolute OzoneĀ®based in CANADA
The purpose of the ozone destructors is to convert ozone gas into harmless oxygen before releasing it into the atmosphere. The AOD series Ozone Destruct Unit utilizes a thermal-catalytic method to remove excess ozone. The destructor device uses Carulite 200. The ozone does not consume it and is a safe material that is not considered ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you