Only show results in Virginia? Ok

truck wash equipment

  • Truck Wash

    An All-Vehicle Cleaner that has the strong efficiency needed for all exterior applications on vehicles and machinery, without the danger of using solvents. An alkaline industrial water based cleaner for the purpose of cleaning vehicles.

    By BlueStream Environmental Technologies (Pty) Ltd. based in Johannesburg, SOUTH AFRICA. from Truck Wash Product line

  • BHB Vertriebs - Model EWR - Bus & Truck Wash System

    Wash gantry for washing the front, side and roof surfaces of trucks and buses, as well as for washing rail vehicles in drive-through halls without overhead line or terminal halls.

    By BHB Waschanlagen Vertriebs GmbH based in Holzmaden, GERMANY. from Bus & Truck Wash System Product line

  • Trash and Garbage Trucks Washing

    Idroconsult has very wide references in the wastewater treatment field related to the washing of garbage trucks, refuse trucks, trash trucks and related vehicles. The plants are usually rather customised dependingly by the daily volume flow rate and by the type of vehicles.

    By Idroconsult S.r.l. based in San Giorgio di Piano, ITALY. from Trash and Garbage Trucks Washing Product line

  • PREVENT - Truck Wash Berms with 4` Walls

    The PREVENT Truck Wash Berm is designed as a mobile wash containment system. Instead of the standard 1' walls used on the PREVENT IS or OS, the Truck Wash berm uses 4' foam encapsulated entrance/exit walls with 4' foam side walls. This allows for continuous drive-over/drive-through applications where folding a wall up and down each time would be ...

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA). from Truck Wash Berms with 4` Walls Product line

  • Auto Wash - Model Plus - Alkaline Cleaner

    Auto Wash Plus is an alkaline cleaner designed especially for removal of road film, soot, brake-dust, grease and oxidation from cars and trucks. Auto Wash Plus is an excellent all-around vehicle cleaner and can be used on fifth wheels and engines for grease removal as well as doing an outstanding job of cleaning and brightening Aluminum wheels and ...

    By The River City Soap Company based in Memphis, TENNESSEE (USA). from Alkaline Cleaner Product line

  • Model Power Wash - Pressure Washer and Steam Cleaner Solution

    Power Wash has been successfully utilized to clean fin fans. Power Wash is a versatile degreaser for industrial and institutional applications. It effectively dissolves and removes road grime, oil, carbon, dirt, etc. from virtually any surface. We have developed several versions of Power Wash to meet our customer’s needs, Power Wash and ...

    By Jayne Products, Inc. based in Carson, CALIFORNIA (USA). from Pressure Washer and Steam Cleaner Solution Product line

  • Turbovac - Trucks

    Our Turbovac series trucks are ideal for environmental remediation work − they’ll handle heavy sludge, slurries and liquid waste materials without compromise. With cyclonic filtration technology, airflow ratings of 1,800 CFM to 5,500 CFM, and powered with 28″ Hg of vacuum, this system is your solution to the most complex ...

    By Cusco Fabricators, Inc. based in Richmond Hill, ONTARIO (CANADA). from Trucks Product line

  • Kenworth - Model W900 - Truck

    When you’ve arrived, there’s really only one choice to make; Kenworth W900. The perfect fusion of cutting-edge technologies, expert engineering and classic styling. It just doesn’t get any better than this.

    By Kenworth based in Kirkland, WASHINGTON (USA). from Truck Product line

  • Kenworth - Model T800 - Truck

    There was a time when customers scheduled deliveries by the calendar. Now they use a watch with an accurate second hand. Computers and satellite systems quicken the pace. Downtime is the enemy. And the competition keeps getting smarter. Welcome to the new millennium.

    By Kenworth based in Kirkland, WASHINGTON (USA). from Truck Product line

  • Premium

    Mellegard & Naij - Model EX - Sludge Reciever

    Robust innovative design from quality stainless materials. Selectable screening separation. Preferably self cleaning Cross Screen. Selectable screenings treatment. Wash Press, Screw Press, Ram Press. Alternative tank configurations. Integrated stone trap conveyor, Truck compressor air evac. Enclosed, safe & hygienic with easy to open access ...

    By Hydria Water AB based in Borås, SWEDEN. from Sludge Reciever Product line

  • FFT - Model FFC- Vac - Truck Mix

    Assists Vactor Trucks in cleaning grease in collection system force and gravity mains.As the truck uses its cleaning nozzle to break up clogs due to grease buildup, the mix keeps the suspended grease from reforming downstream at the next lift station. Once the grease has been treated, the municipality is done dealing with it. The grease now is ...

    By Fog Free Technologies, LLC (FFT) based in Charleston,, SOUTH CAROLINA (USA).

  • Hydrovac Trucks

    This powerhouse is designed to work with heavy applications that typical vane type vacuum pump systems cannot handle. The Hydrovac series supports a low maintenance tri-lobe positive displacement blower with airflow ratings of 980 CFM to 1,400 CFM and vacuum levels up to 28″ Hg, a reversible airflow piping system for pressure off-loading, ...

    By Cusco Fabricators, Inc. based in Richmond Hill, ONTARIO (CANADA). from Hydrovac Trucks Product line

  • BlueBox - Model Vactor - Vacuum Trucks

    Rent a BlueBox Vactor to clean your own wastewater. An easy solution for difficult and sludgy wastewater: the BlueBox Vactor has been developed for waste collection companies. Save up to 75% on your discharge fees. Our waste water treatment system is especially well suited to treat very dirty and sludgy waste water. Waste water that is collected ...

    By Bluetector based in Huenenberg, SWITZERLAND.

  • Duravac Trucks

    If extreme weather and operating conditions are proving to be a problem, then Cusco’s Duravac series is the way to go. This unit is specifically engineered with heated valves and heavy-duty construction for off-road applications in the oil and gas fields, and is equipped with a low maintenance tri-lobe positive displacement blower ranging ...

    By Cusco Fabricators, Inc. based in Richmond Hill, ONTARIO (CANADA). from Duravac Trucks Product line

  • Notos - Vacuum Truck

    The new Notos Vacuum Truck offers a robust design and construction that will handle your most demanding applications.  It handles heavy sludge, slurries and the toughest liquids and minimizes material carry over from tank to filtration system.

    By Rush-Overland Manufacturing based in Odessa, TEXAS (USA). from Vacuum Truck Product line

  • Talos - Vacuum Truck

    The new Talos Vacuum Trucks is a robustly designed and constructed truck that will handle your most demanding applications.  Whether your application needs are very specific or varies in nature, we have the capability to configure this series to suit your application. The new series uses a rotary vane vacuum pump that is most commonly used to ...

    By Rush-Overland Manufacturing based in Odessa, TEXAS (USA). from Vacuum Truck Product line

  • HidroMak - Rear Loaded Garbage Truck Body with Container Washing System

    Containers is needs to empty and clean. We have a solutions with one Truck Chasis. Our System has a water tank and high pressure pump for cleaning the containers after emptied it.

    By HidroMak based in Bakirkoy / Istanbul, TURKEY. from Rear Loaded Garbage Truck Body with Container Washing System Product line

  • Pristine - Model 322 - Car Wash Cleaner

      PRISTINE is a high-foaming detergent to wash cars, buses and trucks by hand or with pressure spraying equipment. PRISTINE is safe on hands and does not attack well-bonded paint or other equipment. PRISTINE is formulated for soft and hard water conditions, is economical in use dilution and easy to rinse. PRISTINE is a phosphorus-free ...

    By Constant America based in Montreal, QUEBEC (CANADA). from Car Wash Cleaner Product line

  • Model 5+1 m3 - Garbage Truck

    Body: Floor is made of minimum 3 mm. thickness ST52 steel sheet. Side walls are made of minimum 4 mm. thickness ST52 steel sheet. The shape of the side walls are outward slightly convex. The top of the body is made of minimum 3 mm. thickness ST52 steel sheet. The top and floor of the body will be strength with sufficient profiles. Front frame is ...

    By Arslan Damper Makine San. Tic. Ltd. Sti. based in Aliağa/İZMİR, TURKEY. from Garbage Truck Product line

  • Model 13+1 m3 - Garbage Truck

    Body: Floor is made of minimum 4 mm. thickness  ST52 steel sheet. Side walls are made of minimum 4 mm. thickness  ST52 steel sheet. The shape of the side walls are. outward slightly convex. The top of the body is made of minimum 4 mm. thickness ST52 steel sheet. The top and floor of the body will be strength with sufficient profiles. ...

    By Arslan Damper Makine San. Tic. Ltd. Sti. based in Aliağa/İZMİR, TURKEY. from Garbage Truck Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you