Tube Cleaning Equipment In USA
-
Manufactured by Projectile Tube Cleaning, Inc.based in USA
Projectile Tube Cleaning nozzles are perfectly designed for the mechanical tube cleaning process. The nozzles are made to fit snugly in each tube in order to make a complete seal and effectively propel projectiles. Nozzle sizes range from 1/2” to 1¼” (12.700mm to 31.750mm) and are available ...
-
Manufactured by Conco Services Corporationbased in USA
Through a water flushing and rotary drilling action, the Conco HydroDrilling system is the fastest and most effective way to remove difficult deposits from the inside of heat exchanger tubes, chemical reactors, condensers, re-boilers and absorbers. The revolutionary HydroDrill™ high-torque cleaning system removes obstructions from any ...
-
Manufactured by Conco Services Corporationbased in USA
The ProSeries™ Tube Cleaning System is the same, durable, field-proven system that Conco crews use to clean condenser and heat exchangers tubes in power plants and industrial facilities. This system has effectively cleaned over 100 million heat exchanger tubes worldwide and is the most ...
-
Manufactured by Projectile Tube Cleaning, Inc.based in USA
pressure of 800 psi, the majority of tube cleaning situations only require 300 to 450 psi. Projectile’s pumping system is extremely user friendly and is perfect for a wide range of tube cleaning ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The efficiency of a condenser tube-cleaning system is dependent on the quality of the cleaning balls injected to clean the tubes. The sponge balls have a diameter that is slightly larger than the ID of the condenser tubes, allowing them to have constant contact with the tube ...
-
Manufactured by ECOMAX SOLUTIONS PVT LTDbased in INDIA
ECOMax-HE helps to keep the heat exchanger tube always clean online, thereby achieving the highest level of performance in the Water Cooled HVAC Chillers, Power Plant Condensers and Process Heat Exchangers. It works on the principle of injection and collection of cleaning sponge balls into the heat exchanger tubes. Salient ...
-
Manufactured by Innovas Technologies LLCbased in USA
The Helios tube cleaning system is installed on heat exchangers and keeps the tubes clean without time-consuming intervention. Specialized cleaning balls are injected at set intervals into the cooling water flow. The balls rub the tubes clean and are then trapped at the outlet of ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Removing scale from heat exchangers and condenser tubes is costly and labor-intensive. The productivity lost during such downtime can never be recovered. The Brackett Green automatic tube cleaning system (ATCS) eliminates maintenance costs associated with chemical/offline cleaning. By injecting appropriately sized elastomer balls ...
-
Manufactured by Projectile Tube Cleaning, Inc.based in USA
Projectile Tube Cleaning’s Water Gun is designed with durability, function, and user friendliness in mind. Compared to other guns on the market, these guns have a smoother trigger action, which reduces user fatigue, and a more durable design and structure that translates to a longer lasting gun. Projectile Tube Cleaning ...
-
Manufactured by Goodway Technologies Corporationbased in USA
The AWT-100X Air Powered Tube Cleaner is our most powerful unit. It incorporates the same operating principles as the AWT-100. Equipped with a 4 HP (3 kW) drive motor, this machine has the strength needed to clean virtually any tube/pipe 1/4' (6.4mm) I.D. and up. Flexible shafts and accessories are available for both wet or dry ...
-
Manufactured by WTR Engineering, LLCbased in USA
The WTR Condenser Tube Cleaning System (CTCS) is vital for the prevention of micro-fouling from contaminants in cooling water circuits. CTCS’s are used where impurities within the cooling water form scale deposits on inner tube surfaces during the heat transfer process, reducing the heat transfer rate, often requiring a ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The WTR® Condenser Tube Cleaning System (CTCS) is vital for the prevention of micro-fouling from contaminants in cooling water circuits. These systems are used where impurities within the cooling water form scale deposits on inner tube surfaces during the heat transfer process, reducing the heat transfer rate, often requiring a ...
-
Manufactured by Thomas C. Wilson, LLCbased in USA
The Wils-Away™ 3000 Pneumatic Tube Cleaning System can go anywhere electric motors are not allowed because it is air-driven. Ideal for removing medium to hard deposits, it also provides forward/reverse drive via remote foot pedal. With the Air-Driven units you can control the speed of the shaft and casing for effective cleaning action. ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The ball-laden water enters the cylindrical spool piece where two angled grids with bars spaced a few millimeters, arrest the balls as the flow passes through. The balls roll along the grids to the downstream extremities where they are collected in whirl boxes and exit to the skid-mounted ball pump and ball collector. The optional ball counter and spent ball remover are also skid ...
-
Manufactured by Arthur Products Companybased in USA
Tube cleaning nozzle has three grooves to allow for staggered drill patterns providing powerful polishing and ...
-
Manufactured by WSA Engineered Systemsbased in USA
This type of ATCS is applied exclusively to condensers and heat exchangers with water tubeside. The Ball type ATCS functions through the creation of a closed loop within the greater circulating water system. Within this closed loop sponge rubber balls are circulated, which by random selection flow through all tubes on a frequent basis, ...
-
Manufactured by WSA Engineered Systemsbased in USA
compressors coolers, etc., reducing fouling and scaling, reducing shut downs for cleaning, increasing heat transfer efficiency and reducing KW/ton consumption remains the facility engineer’s and manager’s goal.. WSA’s On-line Automatic Tube Cleaning System (ATCS) provides the plant operators the means to achieve their desired ...
-
Manufactured by WSA Engineered Systemsbased in USA
and scaling, reducing shut downs for cleaning, and increasing heat transfer efficiency and plant performance are the process engineer’s and unit operation’s goals. WSA’s On-line Automatic Tube Cleaning System (ATCS) provides the plant operators the means to achieve their desired ...
-
Manufactured by ECOMAX SOLUTIONS PVT LTDbased in INDIA
ECOMax-HE® Automatic Tube Cleaning System for HVAC - It’s an Automatic Tube Cleaning System based on Patented & Patent-Pending designs that mitigates the fouling problem in the shell and tube heat exchangers with its online solution capabilities. The product helps tackle the effect of fouling on HVAC chillers, ...
-
Manufactured by ECOMAX SOLUTIONS PVT LTDbased in INDIA
ECOMax-HE® is an extremely effective online condenser tube cleaning system improving performance and efficiency of Power Plants by keeping inner walls of heat exchanger tubes clean. The product helps tackle the scaling on power plant condensers :- Increased steam consumption, Decreased turbine efficiency ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you