Showing results for: Turbidity Monitoring Equipment Near Spain
-
Manufactured by microLAN B.V. - Aqualabo Groupbased in NETHERLANDS
, it is possible to differentiate divisions of algae by their fluorescence excitation spectrum. Other fluorescing matter (for example, DOM = dissolved organic matters measured with the 365nm wavelength and turbidity, measured with the 710nm wavelength) are detected to enhance the accuracy of the ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² LS Sensor is designed to monitor the levels of suspended solids or turbidity typically found in final effluent from municipal and industrial wastewater treatment plants. It is also great at monitoring solids in the intake to both effluent and drinking water treatment processes. Monitoring of these key ...
-
Manufactured by In-Situ Processbased in USA
Turbidity is an excellent early indicator of process problems, high intake Turbidity will cause filter problems and possible blockages and an increase in Turbidity in the Final Water can indicate filter failure and is an indicator of possible Cryptosporidum in the ...
-
Manufactured by Aqualabobased in FRANCE
Major French actor specialized in the conception and manufacture of measuring sensors dedicated to water quality control for more than 70 years, the brand Ponsel of the company AQUALABO, offers its new Low Turbidity digital sensor for low-range turbidity measurements for drinking water production processes. ...
-
Manufactured by QED Environmental Systemsbased in USA
QED PurgeScan Technology provides an easier and more accurate assurance of purge stabilization, automatically signaling when stabilization has been achieved for selected water quality parameters and saving your data file with stabilization noted. MicroPurge MP25 Flow Cell purge water quality monitor leads the field in performance, ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² LR Sensor has been specifically designed to monitor final treated, portable and filter water. The sensor is extremely sensitive and is capable of discriminating changes in Turbidity of less than 0.1 FTU. The 90º light scatter monitoring technique makes the sensor sensitive to a wide range of particle sizes, from ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTech D-ISO Turbidity Sensor is designed to monitor final treated, potable and filter water. The flow-through cell design captures stray light to ensure a stable zero point and is capable of measuring changes in turbidity of less than 0.01 NTU. The high global standard light scatter technique makes the sensor sensitive to a wider ...
-
Manufactured by In-Situ Processbased in USA
Monitoring Final Effluent Suspended Solids or Turbidity is a key parameter for assessing the quality of the effluent in respect of meeting discharge consent and permitting levels. It is also an excellent indicator of the basic performance of the treatment works. An increase in the level of Turbidity is an indicator to plant operators that ...
-
Manufactured by scan GmbHbased in AUSTRIA
i::scan - the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi ...
-
Manufactured by Adasa - a subsidiary of SKion Waterbased in SPAIN
aquaTest-MO automatically makes continuous measurements of physical-chemical and organic matter parameters, integrating the measurement of these parameters into one single unit. The combination of these measurements provides the necessary information for water quality analysis and diagnosing the origin and causes of alterations and potential pollution of the medium. It is very useful for ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The ClariVUE™10 is an ISO 7027 compliant, submersible, side-scatter turbidity sensor. It outputs an SDI-12, digitally processed signal that all modern Campbell Scientific data loggers can measure. The side-scatter turbidity measurement can be used as a surrogate for suspended sediment concentration in aquatic ...
-
Manufactured by Aqualabobased in FRANCE
ODEON is the range of handheld numerical devices dedicated to water quality control on the field or in the laboratory. Real combination of ruggedness and digital intelligence, ODEON offers reliability and flexibility never reached before. With digital sensors DIGISENS, it can measure up to 9 physicochemical parameters. With PHOTOPOD, it becomes a photometer able to analyze more than 40 additional ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
Sometimes multiparameter monitoring is not required, this is where the AP-LITE comes in. This pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
an infrared light and the measuring is not affected by the color of the sample. They are suitable for measurement of turbidity in water quality monitoring, municipal and industrial water treatment and ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
FLUORAT-02 is a multifunctional fluorescence analyzer intended for analysis of water, soil, foodstuff, etc. This instrument determines a wide range of analytes based on fluorescence, chemiluminescence, phosphorescence and photometry ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The ICON Analyzer performs photometric absorption measurements in the visible light range. With differential absorbance colorimetry (DAC), the analyzer compensates for the color and turbidity of the sample by measuring both before and after the addition of a color ...
-
PremiumManufactured by Eureka Water Probesbased in USA
A transmissometer measures the percentage of light transmitted along a fixed path. Eureka integrates 3 party transmissometers, which are mounted externally to the Manta multiprobe. ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Measuring photosynthetically active radiation (PAR) under the surface of water is useful in a variety of fields, from algal biofuels research to environmental quality. When light passes through a water column, it is attenuated based on the thickness of the column and the turbidity of the water. Measuring PAR underneath the surface of a ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Turbidity is an indication of the amount of light that will pass through a column of water. Clear waters have low turbidity; waters with high suspended solids have high turbidities. ...
-
PremiumManufactured by KISTERSbased in GERMANY
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you