Showing results for: Turbidity Monitoring Equipment Near Switzerland
-
Manufactured by scan GmbHbased in AUSTRIA
i::scan - the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Turbidimeter TurbiCheck. Light source infrared light, measurement by the intensity of scattered light at an angle of 90 degrees, digital readout. Measuring range 0.01-1100 TE/F or FNU/NTU. Battery powered. Complete in case. ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring range 0 – 1,000 NTU. Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
Sometimes multiparameter monitoring is not required, this is where the AP-LITE comes in. This pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The self-emptying disc stack centrifuges from Flottweg have the Soft Shot® ejection system as standard equipment in order to carry the separated solids out of the bowl. This solid ejection system allows any combination of partial and full emptying. Depending on the product being processed and the consistency of the solid, adapting the type of ejection provides optimum operation. The ejection ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The ColorPlus is built to accommodate up to three different light sources (UV and visible range) for the measurement of color, DOC and concentrations. By use of the dichromatic measurement at separate wavelengths the turbidity can be compensated. Measurements are performed inline or in bypass cells, the selection of materials for the ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The ColorPlus is built to accommodate up to three different light sources (UV and visible range) for the measurement of color, DOC and concentrations. By use of the dichromatic measurement at separate wavelengths the turbidity can be compensated. Measurements are performed inline, the selection of materials for the cell and housing ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
In-line turbidity measurement for the water treatment. The AquaScat measures the turbidity of potable water according to IEC 27027, with the measurement carried out directly in the water. This reduces maintenance work to a minimum. The calibration is done with a checking unit that is installed when needed. Various customer wishes can be ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The ColorPlus is built to accommodate up to three different light sources (UV and visible range) for the measurement of color, DOC and concentrations. By use of the dichromatic measurement at separate wavelengths the turbidity can be compensated. Measurements are performed inline or in bypass cells, the selection of materials for the ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The AquaScat measures turbidity of potable water according to IEC 27027 in a free-falling water stream. This contactless design eliminates window foiling and minimizes servicing which is especially of importance with the version HT for high turbidity. Calibration check is performed with a calibration unit with a glass reference to be mounted ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The AquaScat measures turbidity of potable water according to IEC 27027 and is specially designed for installations with highly gaseous water under pressure. Calibration check is performed with a calibration unit with a glass reference that is mounted when performing the ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The TurbiGuard is used for monitoring medium to high turbidity, in process liquids. A single version of the TurbiGuard featuring two measuring ranges can be widely used for monitoring medium to high turbidity. The TurbiGuard is factory calibrated with a true, linearized Formazine calibration. For simple applications and system ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The AquaScat measures turbidity of potable water according to IEC 27027 using 90+° scattered light detection in a free-falling water stream. This contactless design eliminates window foiling and minimizes servicing to a minimum. Calibration check is performed with a calibration unit that is either mounted to perform the ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The ColorPlus is built to accommodate up to three different light sources (UV and visible range) for the measurement of color, DOC and concentrations. By use of the dichromatic measurement at separate wavelengths the turbidity can be compensated. Measurements are performed in bypass cells, the selection of materials for the cell and ...
-
Manufactured by microLAN B.V. - Aqualabo Groupbased in NETHERLANDS
, it is possible to differentiate divisions of algae by their fluorescence excitation spectrum. Other fluorescing matter (for example, DOM = dissolved organic matters measured with the 365nm wavelength and turbidity, measured with the 710nm wavelength) are detected to enhance the accuracy of the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
an infrared light and the measuring is not affected by the color of the sample. They are suitable for measurement of turbidity in water quality monitoring, municipal and industrial water treatment and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The ICON Analyzer performs photometric absorption measurements in the visible light range. With differential absorbance colorimetry (DAC), the analyzer compensates for the color and turbidity of the sample by measuring both before and after the addition of a color ...
-
PremiumManufactured by KISTERSbased in GERMANY
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
For low to medium turbidity measurements the forward and 90° (side) scattered light sensors InPro8600 series have proven to deliver the most precise results. Both systems take advantage of one modern and user-friendly transmitter ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
The InPro 8100 turbidity sensor is used for the measurement of turbidity in biotechnological applications - typically biomass growth in fermenters (cell density). A system is completed with a Trb8300 transmitter and an appropriate sensor housing from the InFit or InTrac ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you