Valve Operator Equipment In Connecticut
-
Manufactured by Crane Co.based in USA
Superior Forging Quality (100% Tested), Multi-stage ultrasonic testing is standard on all forgings and finished valves, so customers can rely on consistent & continuous valve quality despite the most severe process conditions.Lower Cost of Operation: Contoured valve body design and a proprietary hard-face overlay process make ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
, hydraulic pump, hydraulic power outlet connectors, hydraulic oil tank with hydraulic return filter, fuel tank, operation valve, battery, and ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
Bio-Chem Pinch Valves allow flow passage through a flexible tube which is “pinched” off to produce a tight seal. Only the easily replaceable tubing comes into contact with the fluid, making this style of valve ideal for applications requiring frequent changes of the flow path. Pinch Valves have zero dead volume and are highly ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
This three-stage diaphragm pump is an powerful solution for continuous, oil-free pumping of non-corrosive gases to a vacuum level as deep as 1.5 mbar. With its high pumping speed, this pump is an excellent option for higher gas load applications or rapid pump down of vacuum chambers. All wetted parts are made of aluminum, stainless steel and carefully selected plastics suitable for a wide range ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Series 4000 UHP Gas Mixing System combines the accuracy and repeatability of the Series 4000 with a welded, Ultra-High-Purity (UHP) construction. All units are optimized for your target gases. With all metal seals, units are commonly used for both research & development and/or production applications, including calibration of analytical tools that detect impurities in ...
-
PremiumManufactured by Environics, Inc.based in USA
compressed air supply or dangerous and expensive gas cylinders. The air is suitable for use as: a zero reference calibration gas, ultra-pure combustion air for flame ionization detector (FID), and service air for pneumatically operated valves. The system is capable of delivering air free from water vapor, particulates, sulfur dioxide (SO2), Hydrogen ...
-
Manufactured by Arcmed a Halma companybased in UNITED KINGDOM
Bio-Chem Solenoid Operated Micro-Pump is a device designed to provide a precise, repeatable and discrete dispensed volume of fluid. The pumps use a flexible diaphragm to isolate the solenoid actuation mechanism from the fluid path. Since all wetted components in the fluid path are made entirely from chemically-inert materials, these ...
-
Manufactured by Crane Co.based in USA
Krombach manually operated bottom drain valves come with rising handwheel; body with lateral drain nozzle; flange dimensions acc. to DIN 2501; stem sealing with asbestos-free stuffing box packing; valve plug with metallic sealing; handwheel of light metal casting, and are available in three ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Light Hydraulic Storage Reel HSR L-series is designed for the safe and easy storage, deployment and recovery of oil booms. The HSR L reel is suitable for booms of light construction e.g. Lamor ILB and FOB, making deployment from harbors and vessels efficient. The reel frame is manufactured from high-quality marine-grade coated steel. The spool is made of marine-grade aluminum. The reel can be ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Heavy Hydraulic Storage Reel HSR H-series is designed for the safe and easy storage, deployment and recovery of oil booms. The HSR H reel is suitable for booms of any construction, allowing deployment from harbors and vessels efficiently. The reel frame is manufactured from high-quality marine-grade coated steel. The spool is made of marine-grade aluminum. The reel can be lifted securely from ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Hydraulic Power Pack is used as a power source for skimmers and other smaller hydraulically operated equipment such as boom reels, air blowers etc. The power pack is a light-weight, easily portable power solution for hydraulic equipment that can be operated in remote ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
Manufactured by DFT Inc.based in USA
The ULTRA-TROL is designed for lined pipe applications requiring flanged end connections. The internal design features are similar to the HI-100. They include the in-line through ported venturi flow shape and the contained spherical ball. These basic features enable the valve to operate smoothly and efficiently at high or low ...
-
Manufactured by DFT Inc.based in USA
The HI-100 features an in-line Straight-thru, venturi flow design. The seating element, a spherical ball, is contained by a cage that positions it relative to the downstream seat by means of linear stem travel. There are no close clearances between the moving parts (i.e. cage, ball and seat). These features enable the valve to operate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you