Only show results in Virginia? Ok

Vapor Condensation equipment

  • Water Vapor Recovery Condenser

    The standard water vapor recovery condenser is constructed of a series of fined tube coils mounted in a stainless steel enclosure through which the water vapor from the evaporator is pulled by a blower. The enclosure drains by gravity to a receptacle, drain line or circulating loop. Cooling water is circulated through the fined tube coils to ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • Premium

    AEREON - Model VRUs - Guardian And Sentry Series Of Vapor Recovery Units

    AEREON’s GUARDIAN and SENTRY series of vapor recovery units (VRUs) provide a reliable, low maintenance solution for condensate and crude storage vapor recovery in the upstream and midstream markets.

    By AEREON based in Austin, TEXAS (USA). from Gas and Vapor Recovery Systems Product line

  • Premium

    AEREON - Oxygen Removal & Voc Recovery System

    In crude and condensate truck loading operations, when vapor balance loading is required to reduce emissions, oxygen contamination of the tank vapor space can be a major concern. With the introduction of oxygen into the vapor space, an explosive environment may exist creating a safety concern. If VRUs are used to recover the tank vapors, the ...

    By AEREON based in Austin, TEXAS (USA). from Gas and Vapor Recovery Systems Product line

  • Condensation - Cooling and Drying System

    This process is based on cooling the effluent to very low temperatures, using liquid nitrogen or other cryogenic fluid as the refrigerant. This allows the separation of the pollutants by reducing the vapour pressure in relation to the equilibrium between liquid / vapor and solid / vapor. By implementing a condensation system it is possible to ...

    By GeoStream Srl based in Tarcento (UD), ITALY. from Groundwater and Soil Treatment Product line

  • Premium

    Model CP - Condensate Pot

    Biogas or sewage gas is water vapor-saturated gas. Typically it comes in biogas plants and Their piping systems due to temperature influence on the formation of condensate water. Condensate May like to blockages at low points, deposits, corrosion lead in the pipeline components.

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Gas Processing Product line

  • Premium

    Model RV C Series - Mechanical Vapor Recompression (MVR) Falling Film Evaporators

    The evaporator of RV C series is based on the falling film technology as mechanical vapor recompression system. Wastewater flows down on the internal walls of the heat exchanger tubes, while the vapor produced condensates on the external walls of the same tubes.

    By EVALED-Evaporator based in Zoppola (PN), ITALY. from EVALED RV - Mechanical Vapor Recompression Product line

  • Premium

    EPG - Condensate Filter Separators

    Since 1988, EPG Companies Inc. has built hundreds of its CS series condensate coalescer separator filter silencers for removal of both particulates and liquid droplets from air streams. Its unique up-flow design passes the air stream through a mixed media element which coalesces fine liquid vapor into larger droplets which, by gravity, drop to the ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Remediation Product line

  • Refrigeration - Condensation Vapor Recovery Equipment

    Refrigeration Condensation, along with Lean Oil Absorption, was one of the first vapor recovery technologies to be utilized in the terminals industry. The theory of operation is relatively straight forward, the air hydrocarbon stream (the vapor) is chilled to a temperature where the hydrocarbons condense out of the vapor stream. In practice ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Recovery Technologies Product line

  • Model CondensoXS - Condensation Soldering

    Optimized vapor phase soldering with extremely small footprint. The CondensoXS is the smallest model included in the CondensoX series. In comparison with the next larger model, the footprint of the CondensoXS is roughly 25% smaller. Nonetheless, the CondensoXS is distinguished by the same process performance as the other models of the Condenso ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Condensation Soldering Product line

  • Model VXC - Refrigerant Condensers

    Since 1978, thousands globally installed, proving the VXC condenser reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation.  No external moving parts, helping it withstand the toughest weather. Various corrosion-resistant materials, including the unique B

    By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Refrigerant Condensers Product line

  • Premium

    Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Industrial Product line

  • Model CondensoXP - Condensation Soldering

    Vapor phase soldering for high throughput. The CondensoX series is based on a well-conceived design, in particular with regard to the hermetically sealed process chamber. Without moving the PCB during the process, the CondensoXP combines vacuum profiling and temperature profiling into a single system. Since the PCBs are not moved during the ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Condensation Soldering Product line

  • Model CondensoXM - Condensation Soldering

    Best possible soldering results with and without vacuum. The CondensoX series is based on a well-conceived design, in particular with regard to the hermetically sealed process chamber. Without moving the PCB during the process, the CondensoXM combines vacuum profiling and temperature profiling into a single system. Since the PCBs are not moved ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Condensation Soldering Product line

  • Recold - Model JC - Evap Condenser

    The Recold JC is a low noise, forced draft, centrifugal fan design with a weight saving, corrosion free copper coil all in a low height configuration. This Evaporative Condenser is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Its low profile design simplifies ...

    By SPX Cooling Technologies, Inc. - a division of SPX Corporation based in Overland Park, KANSAS (USA). from Evaporative Condensers Product line

  • Cryogenic Condensation and Vapor Recovery System

    Polaris is leader in high performances cryogenic condensation systems, having developed an efficient and reliable technology also for complex applications, getting maximum advantages of the great potential of cryogenic treatment, thanks to proprietary patented heat exchangers which are characterised by high fractionating capacity of vapours and ...

    By Polaris S.R.L. based in Misinto (MI), ITALY.

  • 212˚F Steam Condensate Return Stations

    Roth 212 ° F (100 ° C) Steam Condensate Return Stations are designed to handle water near or at the boiling point. Low NPSH submerged pumps provide full capacity at any liquid temperature up to 212 ° F (100 ° C). These units will deliver hot water at temperatures up to 212 ° F (100 ° C) and will not vapor bind at 212 ° ...

    By Roth Pump Company based in Rock Island, ILLINOIS (USA). from Steam Condensate Return Systems Product line

  • Steam Condensate Return Stations

    Roth Pump standard steam condensate return transfer stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard ...

    By Roth Pump Company based in Rock Island, ILLINOIS (USA). from Steam Condensate Return Systems Product line

  • RheoVac - Condenser Monitors

    Large increases in turbine back pressure are easily observed and corrective actions are taken promptly, but small amounts of excess back pressure often go unnoticed and can cost millions of dollars over the long haul. RheoVac instruments continuously monitor air in-leakage, exhauster capacity and other parameters to give you the information needed ...

    By Intek, Inc. based in Westerville, OHIO (USA). from Monitors For Power Plant Condensers Product line

  • Lean Oil Absorption Vapor Recovery Equipment

    Lean Oil Absorption systems, along with Refrigeration Condensation, were among the earliest vapor control technologies to be utilized in the terminal industry for the control of vapors generated by product transfer operations. The theory of operation of lean oil absorption is relatively uncomplicated. The lean oil is forced to make intimate ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Recovery Technologies Product line

  • Refrigerated Condensation

    The C3 Technology developed by G.E.O. is a combination of cryogenic-cooling and compression processes with a proprietary regenerative adsorption technology that efficiently recovers volatile organic compounds (VOCs) from the off-gas vapor stream of soil vapor extraction (SVE) or dual phase extraction (DPE) systems. The chemical is recovered as a ...

    By EnviroLogek Technologies based in Culver City, CALIFORNIA (USA). from Environmental Engineering & Remediation Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you