Only show results in Virginia? Ok

Vapor Condensation Equipment equipment

  • Premium

    AEREON - Model VRUs - Guardian and Sentry Series of Vapor Recovery Unit

    AEREON’s GUARDIAN and SENTRY series of vapor recovery units (VRUs) provide a reliable, low maintenance solution for condensate and crude storage vapor recovery in the upstream and midstream markets.

    By AEREON based in Austin, TEXAS (USA). from Gas and Vapor Recovery Systems Product line

  • Refrigeration - Condensation Vapor Recovery Equipment

    Refrigeration Condensation, along with Lean Oil Absorption, was one of the first vapor recovery technologies to be utilized in the terminals industry. The theory of operation is relatively straight forward, the air hydrocarbon stream (the vapor) is chilled to a temperature where the hydrocarbons condense out of the vapor stream. In practice ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Recovery Technologies Product line

  • Model VXC - Refrigerant Condensers

    Since 1978, thousands globally installed, proving the VXC condenser reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation.  No external moving parts, helping it withstand the toughest weather. Various corrosion-resistant materials, including the unique B

    By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Refrigerant Condensers Product line

  • Model CondensoXP - Condensation Soldering

    Vapor phase soldering for high throughput. The CondensoX series is based on a well-conceived design, in particular with regard to the hermetically sealed process chamber. Without moving the PCB during the process, the CondensoXP combines vacuum profiling and temperature profiling into a single system. Since the PCBs are not moved during the ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Condensation Soldering Product line

  • Premium

    Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Industrial Product line

  • Water Vapor Recovery Condenser

    The standard water vapor recovery condenser is constructed of a series of fined tube coils mounted in a stainless steel enclosure through which the water vapor from the evaporator is pulled by a blower. The enclosure drains by gravity to a receptacle, drain line or circulating loop. Cooling water is circulated through the fined tube coils to ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • Model CondensoXM - Condensation Soldering

    Best possible soldering results with and without vacuum. The CondensoX series is based on a well-conceived design, in particular with regard to the hermetically sealed process chamber. Without moving the PCB during the process, the CondensoXM combines vacuum profiling and temperature profiling into a single system. Since the PCBs are not moved ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Condensation Soldering Product line

  • Recold - Model JC - Evap Condenser

    The Recold JC is a low noise, forced draft, centrifugal fan design with a weight saving, corrosion free copper coil all in a low height configuration. This Evaporative Condenser is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Its low profile design simplifies ...

    By SPX Cooling Technologies, Inc. - a division of SPX Corporation based in Overland Park, KANSAS (USA). from Evaporative Condensers Product line

  • Lean Oil Absorption Vapor Recovery Equipment

    Lean Oil Absorption systems, along with Refrigeration Condensation, were among the earliest vapor control technologies to be utilized in the terminal industry for the control of vapors generated by product transfer operations. The theory of operation of lean oil absorption is relatively uncomplicated. The lean oil is forced to make intimate ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Recovery Technologies Product line

  • Premium

    EPG - Air Sparging Equipment

    Air sparging is often used in conjunction with vapor extraction for in-situ soil remediation. This process involves injecting pressurized air into the water table in order to strip volatile organic compounds (VOCs) by mass transfer. Air bubbles are created that come in contact with dissolved phase contaminants which are then volatilized. The ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Remediation Product line

  • RheoVac - Condenser Monitors

    Large increases in turbine back pressure are easily observed and corrective actions are taken promptly, but small amounts of excess back pressure often go unnoticed and can cost millions of dollars over the long haul. RheoVac instruments continuously monitor air in-leakage, exhauster capacity and other parameters to give you the information needed ...

    By Intek, Inc. based in Westerville, OHIO (USA). from Monitors For Power Plant Condensers Product line

  • Steam Heated Water Bath Vaporizers

    TOMCO2 Systems’ advanced Steam Heated Water Bath Vaporizer is ideal for the carbonated bottling operations where a constant CO2 temperature vapor is required. Because it is constructed of clean design features and materials, it is well suited for installation in food processing areas and available in standard sizes from 6,000 ...

    By TOMCO2 Systems based in Loganville, GEORGIA (US) (USA). from CO2 Application Equipment- CO₂ Vaporizers Product line

  • Process Condensers

    A properly designed Graham Condenser between the process and vacuum producing equipment will yield significant advantages. The use of a process vacuum condenser can permit significant reduction in the size of the vacuum producing equipment. A condenser can recover for reuse valuable product that’s carried from the process with ...

    By Graham Corporation based in Batavia, NEW YORK (USA).

  • EVAC (Emissions, Volatiles, and Aromatics Control) Unit

    EVAC (Emissions, Volatiles, and Aromatics Control) is Superior Fabrication's answer to the ever-increasing need for an environmentally safe way of disposing BTEX and VOC from glycol regeneration units.

    By Superior Fabrication Inc. based in Elk City, OKLAHOMA (USA). from Equipment Product line

  • Vacuum Vaporizer

    Capacities of 30 – 2000 l/h. In industrial businesses, today, the question about an up-to-date and environmentally friendly way always more frequently arises around the wastewater treatment. We have the answer: DESTIMAT® vaporizer technology permits ecological and economic water recovery out of dirty wastewater. Broader advantages of ...

    By Morselt Borne BV based in Borne, NETHERLANDS. from Industrial Treatment Product line

  • Condensing Economizers Systems

    Condensing Economizers improve the thermal efficiency of boilers by cooling the exhaust gas below its dew point (about 135°F for combustion products of natural gas) and recovering the latent heat of water vapor through special designed heat exchanger units.

    By Ship & Shore Environmental, Inc. based in Signal Hill, CALIFORNIA (USA).

  • DMT - Model CCN-100 and CCN-200 - Cloud Condensation Nuclei Counter

    A popular instrument that measures cloud condensation nuclei. Options: Single or Dual Growth Columns. Clouds are a key factor in moderating climate change. Cloud condensation nuclei (CCN) are those aerosol particles that can form into cloud droplets, and an understanding of CCN concentrations in space and time is necessary if models are to ...

    By Droplet Measurement Technologies (DMT) based in Boulder, COLORADO (USA). from Airborne Instruments- Ice and Cloud Nuclei Product line

  • H2K - Model RLV Series - Rotary Lobe Vacuum System

    Medium vacuum dual phase extraction, Free product recovery, Vapor Extraction, Water extraction of low depth recovery, wells, Bio-pile venting action, Remediation Industry, Dissolved hydrocarbon groundwater recovery.

    By H2K Technologies, Inc. based in Corcoran, MINNESOTA (USA). from Soil Vapor & Dual Phase Vacuum Extraction Product line

  • H2K - Model RCLV Series - Rotary Claw Vacuum System

    High vacuum dual phase extraction, Free product recovery, Vapor extraction, Water extraction of 24’ deep recovery wells, Deep water extraction (25’-70’) with air assisted lift, Remediation industry, Dissolved hydrocarbon groundwater recovery.

    By H2K Technologies, Inc. based in Corcoran, MINNESOTA (USA). from Soil Vapor & Dual Phase Vacuum Extraction Product line

  • Penney - Soil Vapor Extraction Trailers

    Penney Engineering, Inc designs and manufactures an economical soil vapor extraction (SVE) treatment system, neatly housed in a 6’ x 8’ enclosed trailer. It can be easily setup at sites, operated until the site is remediated and then removed to be used at another site. The trailer is insulated and includes an electric heater. A wide ...

    By Penney Engineering, Inc. based in Mansfield, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you