Only show results available in Virginia? Ok

Vehicle Exhaust Extraction equipment

  • Vehicle Exhaust Extraction Systems

    Horizon-Future vehicle exhaust extraction systems start with single station systems for small/medium vehicles - wall or ceiling mounted, through to large multi-point collection systems suitable for both private cars and commercial vehicles. All systems are designed to exhaust to atmosphere.

    By Horizon International based in Avonmouth, UNITED KINGDOM. from Exhaust Ventilation Product line

  • Automotive Mobile Vehicle Exhaust Fume Extraction

    Metro's range of exhaust filter systems allows the operation of diesel and petrol engines in confined spaces. They have the advantage over fixed installations that the vehicle or plant can be driven around the factory or workshop without having long flexible hoses which limit movement. Filters comprise of a high efficiency pleated filter media to ...

    By Health & Safety Engineering Limited based in Sandiacre, UNITED KINGDOM.

  • Premium

    TunnelTech - Model 404 - Extractive NO2 and Visibility

    The CODEL TunnelTech 404 NO2 and Visibility Air Quality Monitor is a compact extractive analyser configured for the continuous measurement of two key parameters in road tunnels. This extremely stable and reliable monitor incorporates an LED to utilise the capacity of Nitrogen Dioxide to absorb UV and blue light to provide accurate readings in ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Tunnel Sensors – Extractive Systems Product line

  • Premium

    TunnelTech - Model 403 - Extractive NO2, NO and Visibility

    The CODEL TunnelTech 403 NO2 NO and Visibility Air Quality Monitor is a compact extractive analyser configured for the continuous measurement of four key parameters in road tunnels. This extremely stable and reliable monitor incorporates an LED to utilise the capacity of Nitrogen Dioxide to absorb UV and blue light to provide accurate readings in ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Tunnel Sensors – Extractive Systems Product line

  • Premium

    TunnelTech - Model 402 - Extractive NO2, CO and Visibility

    The CODEL TunnelTech 402 NO2 CO and Visibility Air Quality Monitor is a compact extractive analyser configured for the continuous measurement of three key parameters in road tunnels. This extremely stable and reliable monitor incorporates an LED to utilise the capacity of Nitrogen Dioxide to absorb UV and blue light to provide accurate readings in ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Tunnel Sensors – Extractive Systems Product line

  • Model AR - Spring Driven Hose Reel

    Spring driven hose reel for exhaust extraction from motorbikes and small cars. Suitable to be wall or ceiling mounted.

    By FILCAR S.p.A. based in Reggio Emilia, ITALY. from Vehicle-Exhaust Extraction Product line

  • Hose Reel Systems

    This product is designed to meet most exhaust extraction requirements in today’s vehicle repair shops by providing safe and productive means of manipulating and storing the flexible exhaust hoses that are required to capture the CO and diesel fumes being generated in the shop. Supplied with an integrated universal mounting ability for ...

    By Texas Electronics Canada Inc. based in QUEBEC (CANADA). from Vehicle Exhaust Extraction Product line

  • Fumex - Model APS Series - Exhaust Extraction with Rail for Worksites with Moving Vehicles

    The ideal exhaust rail for workplaces with moving vehicles. With its unique design and profile rail, APS has the lowest pressure drop on the market.

    By Fumex AB based in Skellefteå, SWEDEN. from Vehicle Exhaust Extractors Product line

  • Fumex - Model ASR and ASRM Series - Exhaust Extraction with Hose Reels for Workplaces with Stationary Vehicles

    A practical solution for exhaust extraction when working on stationary vehicles. When not in use the hose retracts completely. Hose reel with mechanical spring return, ASR. Hose reel with motor return, ASRM. Suitable for use with a high ceilings. Always recommended with hoses longer than 12.5 m.

    By Fumex AB based in Skellefteå, SWEDEN. from Vehicle Exhaust Extractors Product line

  • Fumex - Model ASA Series - Exhaust Extraction with Balancing Block Extractor for Worksites with Stationary Vehicles

    Exhaust extractors with balancing blocks and pivoting arms for stationary vehicles. ASA is recommended mainly for large vehicles and plant machinery, especially where there is a requirement of high temperature operation. The ASA balance block solution is available in two variants, with or without a pivoting arm.

    By Fumex AB based in Skellefteå, SWEDEN. from Vehicle Exhaust Extractors Product line

  • Back-in Systems

    The Sliding Balancer Track System (SBT) sets the standard in extracting vehicle emissions for fire and emergency response vehicles around the world. The SBT system is the preferred system for a single back-in apparatus bay, and is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust emissions. The SBT system ...

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Exhaust Extraction Solutions Product line

  • AirFresh - Ventilation System

    Fresh air for mobile work rooms Workers in mobile, enclosed work areas – such as in crane cabins – are often subjected to special stresses. Air pollutants, heat, cold, can jeopardise the health of the employees. The optimum solution for these exposed work areas: Our Airfresh ventilation system. The slotted canal system reliably ensures ...

  • MagnaStack

    Nederman MagnaStack is a fully automatic exhaust extraction system, based on the same technique as MagnaTrack. The extraction unit, however, is a hood enclosure. This connects automatically with the vertical exhaust stack as the vehicle is backed in to the parking bay. An electro-magnet attaches the stack to the hood, and instantly releases the ...

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • MagnaTrack HS/S

    Nederman MagnaTrack HS is available in lengths from 3.5 m to 18 m. Nederman MagnaTrack S is designed to serve vehicles with a fewer runs and lower exit speeds than the HS version. It is available in track lengths from 5.9 m upt o 11.8 m.

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • Pneumatic Track System -PTS

    PTS is suitable for stations where vehicles vary from time to time. The system is based on a nozzle expanded by compressed air, fixing and sealing the nozzle tightly round the tail pipe. PTS is supplied with a choice of two different sized nozzles to fit the most common types of tail pipes. A quick coupler makes it easy to interchange the nozzles.

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • Single/Twin Exhaust Extractor

    Single Exhaust Extractor is a reliable and functional solution for all types of stationary vehicles. Available with balancer or a cord for manual hose suspension. The balancer automatically raises the hose and nozzle after disconnection, and keeps them lifted at all times. Models for high temperature application are available. Very easy to ...

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • Extraction Unit 920

    The Nederman Exhaust Rail System 920 with a 920/1500 trolley offers an ergonomic solution for extraction from single moving vehicles. The system allows sideways connection of the nozzle up to 1.5 m from the rail, which can be up to 100 m long.

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • Nederman Trackarm

    Nederman Trackarm is a wall mounted extraction arm for heavy stationary vehicles and equipment. The horizontal hose is compressible and fixed to a 180 degrees pivoting arm. The arm is very easy to move and stays exactly in the desired position. A balancer keeps the hose lifted and strached at all times.

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

  • Drive-Through Systems

    The STR system is the preferred system for a drive-through apparatus bay, and is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust emissions.

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Exhaust Extraction Solutions Product line

  • MagnaRail

    Nederman MagnaRail is a high capacity system designed to handle large volumes of exhaust fume. The suction duct serves not only as an exhaust duct, but also as the guide rail that the extraction trolley travels in. Ideal for a drive-through application for vehicles with either high level or low level exhaust pipes. The rail is available in ...

    By Nederman based in Helsingborg, SWEDEN. from Exhaust Extraction Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you