ventilation system equipment in Ontario

  • DeCloet - Ventilation Systems

    DeCloet offers its clients the widest selection of greenhouse ventilation in the industry. We are ventilation experts and can offer you the latest in technology and advise to find the best solution for your growing needs. Forced Air Ventilation : Fans, Shutters & Cooling Pads – We offer a full range of fans, shutters and cooling pads.

    By DeCloet Greenhouse Manufacturing Ltd. based in Simcoe, ONTARIO (CANADA).

  • Beltech - Welding Ventilation Systems

    Beltech has the highest quality and best designed welding ventilation systems on the market. Our Custom Design Systems will take in to account every detail that you require, from workspace ergonomics to air circulation for employee comfort. Our systems have a passive fume exhaust to ensure that the shielding gas is not affected by the ventilation ...

    By Beltech Engineering & Associates Inc. based in Burlington, ONTARIO (CANADA). from Welding Ventilation Systems Product line

  • Ventilation Controls System

    Jamesway’s Guardian system gives hatchery managers complete control of their incubation and hatching environment. It offers an accurate means of monitoring and controlling temperature, humidity, and pressure.

    By Jamesway Farm Equipment Office in Cambridge, ONTARIO (CANADA). from Ventilation Controls System Product line

  • Mobile Ventilation Systems

    A Mobile ventilation system is a method to provide the high quality working environment to a crane operator. With the air handler unit located remote from the crane, the system uses clean air from outside the building and provides pressurized, temperature controlled, filtered outside air to the crane cab. The system is the positive method to air ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Local Exhaust Ventilation Systems

    Local exhaust ventilation systems can be the most cost-effective method of controlling air pollutants and excessive heat. For many manual operations, capturing pollutants at or near their source is the only way to ensure compliance with threshold limit values (TLVs) in the worker's breathing zone. Local exhaust ventilation optimizes ventilation ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • ComEnCo - Coil Coating Oven and Ventilation System

    With an average pre-painting rate of 700 feet per minute (FPM), ComenCo Systems, Inc.’s Coil Coating Oven and Ventilation System provides a fully automated pre-painting environment for a high quality, uniform coil coating process. What enters the ovens as raw, untreated coiled steel exits as fabrication-ready pre-painted materials ready to ...

    By ComEnCo Systems Inc. based in Richmond Hill, ONTARIO (CANADA).

  • SolarWall - Solar Air Heating and Ventilation Systems

    The SolarWall air heating technology generates substantial economic, environmental, and work-place benefits in the form of reduced heating bills, CO2 displacement, and improved indoor air quality. Renowned for its high efficiency & low capital costs, the SolarWall technology uses the sun’s energy to pre-heat ventilation air for ...

    By Conserval Engineering Inc. based in Toronto, ONTARIO (CANADA).

  • Heating, Ventilation and Air Conditioning System

    Hatchery ventilation is one of the key factors in producing good quality hatches. Our team of ventilation specialists helps put together heating, ventilation, and air conditioning (HVAC) systems that are suited to each hatchery’s specific needs.

    By Jamesway Farm Equipment Office in Cambridge, ONTARIO (CANADA). from Heating, Ventilation and Air Conditioning System Product line

  • DiversiTech - Robotic Ventilation Hood

    Diversitech's Robotic Ventilation Hood is the industry's most powerful, reliable and cost-effective ductless welding smoke extractor. The hood's filtration system includes a three-stage spark arrestance package, a pleated pre-filter and a multi-pocket bag filter extending filter life versus conventional systems. The robotic vent hood has a low air ...

    By Diversitech Office in Toronto, ONTARIO (CANADA). from Robotic Ventilation Hood Product line

  • Evaluation & Troubleshooting, Refurbishing & Upgrading of Existing Ventilation Systems

    Most Air Pollution control systems are initially properly designed based on accepted engineering practices and guidelines and will perform adequately for a period of time after the initial startup. However, over time, problems may develop due to several reasons.

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Ventilation Generator Filter Houses

    Quiet ventilation is needed when breakout noise is a problem, when the ventilation system itself is the dominant noise source, or if the system increases the overall noise level of your facility.

    By Innova Global Limited. based in Cambridge, ONTARIO (CANADA). from Ventilation Generator Filter Houses Product line

  • Premium

    Sierra-CP - Test Cell Ventilation Systems

    Sierra-CP designs and manufactures custom ventilation systems to reduce the environmental variability that can effect repeatability of results and unnecessarily extend test programs. Designs are typically customized for each application and can include (or make provision for) heating and cooling units, or re-circulation and make up air. ...

    By Sierra Instruments, Inc. Distributor in Markham, ONTARIO (CANADA). from Test Cell Ventilation Systems Product line

  • NightSolar - Solar Cooling System

    The patented NightSolar systems remove energy from the air to cool buildings without the use of compressors or refrigeration systems.  This solar cooling technology is partly based on the scientific principle of nocturnal radiation, which can cool a roof by as much as 10°C (18°F) below ambient temperature on a clear night. As warm ...

    By Conserval Engineering Inc. based in Toronto, ONTARIO (CANADA).

  • Push-Pull System

    Solutions for various facility layouts: Installing a Push-Pull system in your facility not only creates a cleaner, safer work environment, but also provides cost savings. As it is a modular system, the entire facility does not need to be changed; specific work zones can be designated for new ventilation.

    By Plymovent Group BV Office in Mississauga, ONTARIO (CANADA). from Push-Pull System Product line

  • Mobile Exhaust Systems

    When a major in-plant emission source is closely related to operations carried out by overhead cranes (e.g. furnace charging and tapping, or pouring from ladles), effective pollution control may be obtained through the use of a Mobile exhaust system. The Mobile exhaust system captures emissions from mobile sources while moving along a track. In ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Biological Air Filtration System

    A bio-filtration system has been installed to ensure air exhausted from the facility has odour control prior to exhaust to atmosphere. The plant ventilation system provides an average of four (4) air changes per hour of fresh air, with six (6) in high odour areas, to maintain a negative pressure within the plant to control odours within the ...

    By Themis Power Corporation Ltd. based in Strathroy, ONTARIO (CANADA). from Biological Air Filtration System Product line

  • Hydra - Model 32 & 256 - Addressable Car Park Gas Detection System

    The Crowcon Hydra Addressable Gas Detection System is designed to monitor toxic and/or flammable gas hazards. particularly in car park applications. Addressibility significantly reduces installation costs and makes savings through effective control of ventilation fans achievable - for example running fans at full power only when gas levels rise. ...

  • Air Conditioning and Fresh Air Supply Systems

    We offer innovative and economical design of industrial duty make-up air and air-conditioning systems for pulpits, workrooms, transformer vaults and other locations throughout your plant that require clean, conditioned air. Our unique ventilation systems reduce ever-increasing capital and energy costs, as air volume and cooling requirements are ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Model FUA - Flexible Direct-Mount Fan for Our Systems

    The FUA series ventilation fans are designed for direct mounting on our metal- and hose tube extraction arms and filters or for use as central fans. These fans are equipped with lightweight aluminium impellers, suitable for extracting exhaust gases, volatile fumes and dust. Matched inlet and outlet areas provide, together with the optimized ...

    By Plymovent Group BV Office in Mississauga, ONTARIO (CANADA). from Flexible Direct-Mount Fan for Our Systems Product line

  • Premium

    CHLORINSITU - Model IIa - Electrolysis System

    Output of 30 – 300 g/h chlorine; CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from sodium chloride and electrical energy. A key advantage is its simple process management and excellent system safety through integral ventilation and bleeding.

    By ProMinent Group - ProMinent GmbH Distributor in Guelph, ONTARIO (CANADA). from Electrolysis System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you