Vertical Profile Equipment
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The WindMast WP350 is a 'met mast replacement' type pulse coherent wind lidar. It is compact, low power, high precision and is designed and manufactured based on the IEC 61400-12-1:2017 standard. The wind speed and wind profile of any 24 height gates from 40m to 350m above the lidar can be continuously detected throughout the day. It is ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
InterOcean Systems has been building Vertical Profiling winches for decades. Our VPS winches are all custom engineered for the task at hand. InterOcean VPS winches can be outfitted with stop switches, bare drum warning systems, break-away links, and even two-way acoustic modems for real-time communication and ...
-
Manufactured by Dulas Ltdbased in UNITED KINGDOM
Remote sensing devices are lightweight and easily transportable, they do not require planning permission and can be applied both offshore and onshore to gather wind data from 40m to 300m in height, with up to 20 separate height measurements taken every ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
Automated water quality profiler for lakes, reservoirs and coastal areas. Featuring a submersible, watertight enclosure and a rugged non-corrosive mechanical winch and drive mechanism, the 6951 provides fully-automated data collection from a pontoon ...
-
Manufactured by LG Sonicbased in NETHERLANDS
The most accurate and cost-efficient way to measure the entire water column. Measures in high resolution. Collects data at various depths. 50% more ...
-
Manufactured by Del Mar Oceanographic LLCbased in USA
The Wirewalker is a vertically profiling instrumentation-platform, powered by ocean waves. Through the Wirewalker’s rapid profiling and ability to integrate a wide variety of sensor payloads, it brings new life to typical one-dimensional sensor time-series as a 2-D depth-time image where an enormous increase in information and ...
-
Manufactured by AML Oceanographicbased in CANADA
The Minos-X is a small vertical profiler that allows you to change the instrument’s sensor load, in-the-field and on-demand. With the Minos-X, your SVPT can become a CTD; Shallow pressure sensors can be swapped for deep; and temperature range can be extended or tightened, as needed. One single profiler meets multiple deployment ...
-
Manufactured by Sea-Bird Scientific - Veraltobased in USA
The WET Labs, Inc. Thetis Profiler is a submersible vertically profiling platform for use in coastal marine and fresh water ...
-
Manufactured by WindCube - a Vaisala companybased in FRANCE
With more than 600 units operating worldwide, the Windcube is the reference remote sensor in the wind industry, providing accurate wind measurements up to 290 meters. Developers, power producers, consultants and manufacturers have selected it for their onshore and offshore projects – from energy yield assessment to power performance testing and ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
WindMast 350-M is a type of pulsed coherent wind lidar for marine application, featured of small size, low power consumption and high measurement precision. It’s specially designed for the harsh marine environment, inheriting all the functional advantages of WindMast WP350. The whole machine is of air-tight design, with the protection level up to IP67 level (it can work normally after being ...
-
Manufactured by Cascade Drillingbased in USA
Lack of a sufficient understanding of the subsurface conditions often leads to underperforming remedies. Development of a valid Conceptual Site Model (CSM) is the single most important activity for ensuring that sound site management decisions, including remedy selection and design, are ...
-
Manufactured by Harmony Enterprises, Inc.based in USA
Turn recycling into profit with this low profile baler! The M60MD Vertical Baler by Harmony Enterprises is a safe and efficient state-of-the-art piece of equipment that means more profit and less recycling! The M60MD Vertical Low Profile Baler is a high capacity vertical baler that fits under a standard ceiling. ...
-
Manufactured by Vinci Technologies SAbased in FRANCE
GEOREC-S is a slim downhole digital tool designed for seismic acquisition in HT conditions. Each GEOREC-S single level includes 3 fixed geophones (optionally, the geophones can be replaced by accelerometers), pressure and temperature gauges and the level is provided with its own power supply and telemetry. Up to 48 GEOREC-S levels can be successively connected with a 7 conductors standard ...
-
Manufactured by Vinci Technologies SAbased in FRANCE
GEOREC is a downhole digital tool designed for seismic acquisition in HP & HT conditions. Each GEOREC single level includes 3 fixed or gimballed geophones, with pressure and temperature gauges, and is provided with its own power supply and telemetry. Up to 48 GEOREC levels can be successively connected with a 7 conductors standard ...
-
Manufactured by Adams Fertilizer Equipmentbased in USA
The Adams 13 Ton Low Profile Vertical Blender is the most popular blender in our low profile vertical blending series. This unique design is ideal for any floor plans with minimum space. Each Adams Vertical Blenders is built with a tapered auger, allowing for a smooth, gentle, and accurate ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical pulse coherent Doppler shift detection, WindMast PBL can meet the high-precision and refined detection requirements of atmospheric three-dimensional wind field in the atmospheric boundary layer. Real-time output of wind profile, turbulence intensity, vertical airflow, boundary layer (cloud bottom) height, ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
For the ease of CAD construction involving medium velocity GW Thermospray distribution patterns, the spray profiles for each nozzle spray angle are available as 3D models in STEP (.STP) file ...
-
PremiumManufactured by KISTERSbased in GERMANY
The OSSB1 universal current meter is a field-proven instrument for measuring the velocity of water in open and closed channels. It is used for point measurement of flow velocity in vertical profiles and covers a flow velocity range from 0.025 to 10 metres per ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you