vibration monitor equipment in Virginia

  • PCH - Model 1028 - Advanced Dianostic Vibration Monitor

    The PCH 1028 is a 2-4 channel digital diagnostic vibration and process monitor intended for stand alone operation. Signal processing is based on embedded FFT-technology, comprising Real Time 800 line Full Zoom FFT, Envelope FFT and Cepstrum, all performed directly in the monitor. The PCH 1028 can monitor up to 192 machine components all with ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Advanced Dianostic Vibration Monitor Product line

  • PCH - Model 1420 - 4-Channel Vibration Monitor

    In the standard IEPE version, each vibration channel operates within 2 simultaneously running frequency bands. The bands are configurable from 0.7 Hz up to 11.5 kHz and will typically monitor the 10-1000 Hz area (ISO 10816-3), as well as the high frequency area 2-10 kHz, where roller bearing resonances are detected.

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from 4-Channel Vibration Monitor Product line

  • Fusion - Active Magnetic Bearings

    Fully integrated magnetic bearing control system – the controller is built into the bearing housing, simplfying installation. Compact controller can be mounted on or near the machine, simplifies installation and reduces cable length and losses. Standard Ethernet port for ease of communications. Optimized magnetic structure reduces bearing ...

    By Synchrony, Inc. based in Salem, VIRGINIA (USA). from Active Magnetic Bearings Product line

  • Type 3680 - Vibration Monitoring Terminal

    Measure unattended vibration related to structural damage, sensitive machinery disturbance and human response with our Vibration Monitoring Terminal Type 3680. The robust Vibration Monitoring Terminal provides real-time data that enables users to prevent harm to buildings, ensure regulatory compliance and meet social license obligations.

    By Brüel & Kjær Sound & Vibration Measurement A/S Distributor in Virginia Beach, VIRGINIA (USA).

  • Vibration Transducers

    PCH Engineering A/S provides a range of industrial vibration transducers covering a wide range of industrial applications. Accelerometers are available in different casings, with different sensitivities and with different operational temperatures. See below. The accelerometers fits nearly all the PCH products, permanent vibration monitors, ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Vibration Transducers Product line

  • PCH - Model 1073 - Advanced Industrial Monitor

    This PCH 1073 is the new generation of high quality low cost vibration monitors, which can be used for surveillance of vibration levels in machinery and detecting unbalance and bearing faults.

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Advanced Industrial Monitor Product line

  • PCH - Model 1106 T - Temperature and Vibration Sensor

    Vibration monitoring of a roller bearing is usually the best early-warning method to detect upcoming bearing damages. If your application also requires a temperature measurement, you can save the installation of a PT100 sensor with transmitter, when you use the PCH 1106 T. Both vibration and surface temperature measurements are provided ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Temperature and Vibration Sensor Product line

  • PCH - Model 1072 - Simple Industrial Monitor

    The PCH 1072 is the new generation of high quality low cost vibration monitors, which can be used in many rotating machine applications. The standard Version is a 1 channels monitor with a frequency range from 0,5Hz to 1kHz. It offers user selectable filters and selection between acceleration, velocity or displacement.

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Simple Industrial Monitor Product line

  • PCH - Model 1106 - Vibration Sensor

    If you need a single 4-20 mA overall vibration sensor, our PCH 1106 is the perfect choice for you. You will get the sensor in stainless steel 303 housing with an integrated M8 mounting stud and a M12 top exit connector. It offers 2 outputs relative to the overall vibration level making it possible to connect both a PLC and maybe a local display. ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Vibration Sensor Product line

  • PCH - Model 1046 - Proximity Probe Monitor

    The PCH 1046 is a proximity monitor with a high quality and an affordable cost. The monitor is targeted to be used for monitoring water, steam or gas turbines or any other type of machine needing on-line vibration monitoring based on proximity probes. The monitor is equipped with 4 vibration channels with the capability of monitoring X,Y Smax and ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Proximity Probe Monitor Product line

  • PCH - Model 1072 Mk2 - Proximity Probe Monitor

    The PCH 1072 Mk2 can be configured for a proximity probe for surveillance of dynamic vibrations as well as for GAP measurements. Both the dynamic vibration signal as well as the actual GAP measurements can be delivered through 2 individual DC outputs to a central controller. The monitor offers 4 relays freely configurable for vibrations and GAP ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Proximity Probe Monitor Product line

  • Premium

    AMETEK PI - Model 5000 - Process Moisture Analyzer

    The versatile AMETEK Model 5000 is a highly sensitive moisture analyzer for process applications where the continuous, reliable measurement of moisture in vapors and gases is required. The Model 5000 analyzer measures moisture on-line by monitoring the vibrational frequency change of a hygroscopically sensitized quartz crystal that is exposed ...

    By Ametek Process Instruments - THERMOX Distributor in VIRGINIA (USA). from Process Moisture Analyzer Product line

  • PCH - Model 1270 and 1272 (SIL-2) - Electronics Vibration Guard Switch

    Critical rotating machinery is often monitored by vibration sensors. Our PCH 1270/1272 Compact Vibration Guards compare the actual vibration level with the internal thresholds 10 times per second and makes it suitable for early warning or even for emergency shutdown of your machinery. Standard ISO 10816(10-1000 Hz) or customized filter ranges can ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Electronics Vibration Guard Switch Product line

  • PCH - Model 1220 - Electronics Vibration Guard Switch

    Are you looking for an electronic vibration switch, without any 4-20 mA output but just a relay, the PCH 1220 is a low cost solution for a basic protection application? PCH 1220 constantly monitors the machine vibration within a 10-1000 Hz (ISO 10816-3) frequency band and compare the value to the preset alarm threshold.

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Electronics Vibration Guard Switch Product line

  • PCH - Model 1275/1277 (ATEX + SIL-2) - Electronics Vibration Guard Switch

    Critical rotating machinery is often monitored by vibration sensors. PCH 1275/1277 is suitable for zone 1/21 areas. The Vibration Guards compare the actual vibration level with the internal thresholds 10 times per second and makes it suitable for early warning or even for emergency shutdown of your machinery. Standard ISO 10816(10-1000 ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Electronics Vibration Guard Switch Product line

  • Velocity Sensors

    CHB 1099 Velocity Sensors are used to monitor the movement, i.e. the vibration of a machine. The units are suitable for a variety of different applications monitoring of unbalance, sleeve bearing vibration, over-all vibration on machines, just to name a few. Supplied with MIL connector and suitable for both horizontal and vertical movements.

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Velocity Sensors Product line

  • Proximity Probes

    CHB 3011 / CHB 3013 Proximity Probes - or displacement transduceres - are used to monitor the movement, i.e. the vibration of a machine. The probes are suitable for a variety of different applications like shaft location of sleeve bearing machines, monitoring of thrust bearing wear, vibration measurements, thermal expansion and etc. The probes are ...

    By PCH Engineering A/S Distributor in Virginia Beach, VIRGINIA (USA). from Proximity Probes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you