Only show results in Virginia? Ok

Vibro-Mechanical Stand equipment

  • Model MLT24 - Test Stand

    This test stand is characterized by fast testing times and maximum testing comfort, and it can simulate loads far past the standard norms. The pneumatic cylinder’s mechanical coupling also allows the MLT24 to be quickly adapted to different module models: The tester types in the module measurements and the MLT24’s software calculates ...

    By PSE AG based in Freiburg, GERMANY. from Mechanical Load Test Stand Product line

  • Model MLT12 - Test Stand

    It is essential for thermal collector and PV module manufacturers that their products comply with relevant standards/norms.  Our test stand MLT12 covers all tests for these standards. To achieve a homogenous load distribution, the tester can easily position the pneumatic cylinders over the modules or collectors, after the software calculates ...

    By PSE AG based in Freiburg, GERMANY. from Mechanical Load Test Stand Product line

  • TurboTank - Stand-Alone Washing Unit

    The TurboTank is the stand-alone version of the TurboWash which includes the TurboWash and Spiralman screen, suitable for large volume screenings washing, ie: flow through a sluice trough.

    By Headworks Inc. based in Houston, TEXAS (USA). from Mechanical Equipment Product line

  • TES - Test Stands

    Our expertise in the production of testing equipment is rooted in our long tradition in the design and production of electric drives with dynamometers. Our products may be used to test combustion engines, electric rotating machines, fans, pumps, compressors, gearboxes, distributor gears and whole vehicles. Our supply includes the complex technical ...

    By TES VSETIN s.r.o. based in Vsetín, CZECH REPUBLIC.

  • Premium

    Stevens - Model SDI-12 - Mechanical Water Level Recorder

    The Stevens SDI-12 Shaft Encoder is a stand-alone, float-operated level sensor that measures the stage (level) of streams, rivers, lakes, and reservoirs.

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA). from Water Level Sensors Product line

  • Vibro-Acoustics - Model FS Series (FS / FST) - Free Spring

    The Vibro-Acoustics FS series (FS & FST) of floor-mounted free-standing isolators provide vibration isolation for mechanical systems and equipment, and are effective at absorbing both low and high frequency vibrations. These “open,” or un-housed, isolators use uniquely-engineered springs that provide a minimum of 50% additional ...

    By Vibro-Acoustics based in Markham, ONTARIO (CANADA). from Vibration Isolation Product line

  • Manual Test Stand

    Provides an easy to use and accurate platform to perform firmness tests with any of our handheld penetrometers. Gives smooth movement and precise alignment with a rugged rack and pinion lever elevating mechanism traveling on two guideposts with tight fitting bushings. The penetrometers simply screw onto a mounting plate that easily attaches to the ...

    By QA Supplies LLC based in Norfolk, VIRGINIA (USA). from Inspection Instruments Product line

  • Assmann - Modular Polyethylene Tank Stand

    Assmann Corporation of America offers an FDO (Full Drain Outlet) outlet assembly. This outlet provides the ability to fully drain your tank without the need for mechanically installed nozzles. The full drain assembly should be utilized where heavy solids or salts can accumulate in the bottom of the tank thus creating difficult maintenance work. ...

    By Assmann Corporation of America based in Garrett, INDIANA (USA).

  • Mixer Custom Lift Stands

    Brawn designs and manufactures both stationary and mobile support structures for our mixers and even for competitors mixing products.  When our customers purchase mixer supports from Brawn, they know that the structure will have the right mechanical integrity and mixer positioning for their application. Lifting supports can be designed to ...

    By Brawn Mixer based in Holland, MICHIGAN (USA).

  • Bentec - Mud Pumps

    Bentec Mud Pumps stand for new technology, enhanced reliability and reduced maintenance.

    By Bentec GmbH Drilling & Oilfield Systems based in Bad Bentheim, GERMANY. from Mechanical Products Product line

  • Valves

    When it comes to Valves RPS stands out as being a single source for delivering all kinds of valves. Our dedicated valves team will study your requirement and suggest the best solution for your project requirements. Below is our program for stock valves.

    By Resources Prime Steel Inc. (RPS) based in Markham, ONTARIO (CANADA). from Mechanical Products Product line

  • Premium

    Lenntech - Y-Strainer Devices for Mechanically Removing Unwanted Solid

    Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS. from Sediment Filters Product line

  • TurboWash - Screenings Washer

    The TurboWash agitator creates a highly turbulent mixing regiment zone in a channel or tank (similar to the water around a propeller on a motor boat), immediately preceding the screening equipment. Wastewater enters the agitation zone and is heavily mixed. The turbulent zone of influence created by the TurboWash agitator loosens and emulsifies the ...

    By Headworks Inc. based in Houston, TEXAS (USA). from Mechanical Equipment Product line

  • FOTI - Drum Filter

    Screening, filtering, drying, classifying or even cleaning – a drum filter has a wide range of possible applications. It is particularly suitable for removing coarse dirt particles of approximately 0.25 – 3.00 mm from the water. In this case, wedge-wire stands for the use of slotted screens as filter medium. By the use of different ...

    By Haase Abwassertechnik GmbH & Co.KG based in Troisdorf, GERMANY. from Mechanical Wastewater Treatment Product line

  • Accumax - Model Smart Series - Mechanical Pipette

    It was the indefatigable efforts of our design and production teams combined with the feedback received from customers that saw the launch of Accumax SMART series of pipette. Accumax SMART pipette matches all quality parameters required to serve the high end research market. It also excels in user friendly features that make pipetting effortless, ...

    By Accumax Lab Technology / Fine Care Biosystems based in Kalol,Gandhinagar, INDIA.

  • Model MF - Flexible and Expandable Mechanical Filter

    The MF is a filter unit for welding fumes and light dust which can be wall-mounted or free-standing. The filter can be used in extraction systems with air volumes up to 2500 m3/h. The MF allows flexible filtration when changes in production take place. If the application changes you can easily insert a different media in the same cabinet.

    By Plymovent Group BV based in Alkmaar, NETHERLANDS. from Stationary Filters Product line

  • bgu - Balance Regulator

    The most important functional elements of the Balance Regulator regulator are the pivoted radial gate, the weighing trough and the regulating weight. These remain in the rest position during low discharge periods with the pivoted radial gate in the fully open position. As the influent discharge increases, it flows through the regulator housing ...

    By bgu-Umweltschutzanlagen GmbH based in Bretzfeld, GERMANY. from Flow Regulation- Flow Regulation Mechanical Product line

  • FTL - Materials and Mechanical Handling Systems

    FTL specialises in both stand alone and turnkey equipment being able to offer consultancy backed up by practical experience and design expertise. FTL’s extensive technical and process knowledge helps to ensure the development other foundy equipment2of cost effective solutions that can be brought up to full production with the minimum of ...

    By FTL Foundry Equipment Ltd based in Willenhall, UNITED KINGDOM.

  • Premium

    Saturn - Dual Shaft Shredder

    For over 40 years, Saturn dual-shaft shredders have been the market choice for recycling industries. These rugged industrial shredders can handle a wide variety of materials and are ideal for challenging applications that require a broad range of product output sizes. Now available with our exclusive, patent pending Hybrid-Drive mechanism, the ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Shredders & Hammermills Product line

  • Olmi - Hydraulic Telescopic Mechanical Drill Machine

    The special Tool holder head, jointed in both directions, with clutch, makes it possible to maintain the desired angle of the drill in any situation, remaining fixed before the start of the hole. The work is carried out exclusively by the operator of the tractor, reducing labour costs. Equipped with a hydraulic telescopic arm that allows the ...

    By Olmi s.n.c. based in Costigliole d`Asti (AT), ITALY. from Other Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you