waste handling Equipment available in Vatican City

  • Model DT-200 - Waste Handling System

    The DT200series “Greenship” waste handling system is our smallest system, consisting of an optional combination of products from our DT200 product portfolio.

    By Delitek AS based in Alsvaag, NORWAY. from Complete Waste Handling Systems Product line

  • Moldow - Transflow Waste Handling System

    Moldow Transflow System provides trouble free extraction of very large quantities of dust and chips with unlimited volumes of extracted air. The Transflow System was developed to increase flexibility of operation on heavily loaded extraction systems.

    By Moldow A/S based in Holsted, DENMARK. from Filter Systems - Equipment Product line

  • Model MRF - Waste Handling system

    Manufactured in the UK to the highest standards, Tong Peal is dedicated to providing a custom built solution to your MRF requirements. Whether you are processing source-segregated or commingled waste, Tong Peal can ensure that your MRF waste handling facility enables you to achieve the highest quality recyclates for the reprocessing sector. With ...

    By Tong Engineering Ltd based in Spilsby, UNITED KINGDOM. from Sorting Solutions Product line

  • Powerkube Plus - Waste Handling Horizontal Baler

    The middle sized machine in the range of Powerkube semi automatic horizontal baling presses. This baler has an aperture size of 1200 mm long x 1440 mm wide which is sufficient to accept medium to large sheets of cardboard fed by conveyor or wheely bin tipper. With up to 62 tonnes of pressure, the baler shears material to make high density square ...

    By Pakawaste Ltd based in Preston, UNITED KINGDOM. from Balers Product line

  • Waste Handling Systems

    Our waste processing systems can be suited for handling communal or biological „green” waste, pre-sorted waste, various industrial scraps or even building construction refuses.

    By Gépsystem Kft. based in Zalaegerszeg, HUNGARY.

  • Showcase

    P. Henkel - Model 120/200/240 Litre - Large Waste Bin with Spherical Base

    The waste bin with spherical base represents hygienic waste disposal of food wastes and liquid slops as well as residual waste and organic wastes. MGBs with spherical base are side-loader-optimised. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance ...

    By P. Henkel GmbH based in Kreuztal, GERMANY. from Large Waste Containers Product line

  • Biothys - Composting Plant and Waste Handling Systems

    Treatment location : Treatment around the perimeter of the site. Location description : 2 hectares. Characteristic smells : Break down organic wastes from garbage. Active agent used : 18 Gelactiv® plates per Smellmeister®'s device • 12 Gelactiv® AFG • 6 Gelactiv® B3. Diffusion technology applied : 3 Smellmeister® G18 ...

    By Biothys GmbH based in Willstätt-Eckartsweier, GERMANY.

  • Premium

    PWTech - Volute Thickener

    The PWTech Volute Thickener is a fully-automated, virtually maintenance-free unit using the 'dewatering drum' design used for the Volute Dewatering Press. The Volute Thickener is perfect for automated sludge wasting from biological processes and thickening prior to storage, digestion, further dewatering, or transport, giving a solids output from ...

    By Process Wastewater Technologies LLC based in Rosedale, NORTH CAROLINA (USA). from Biosolids/Sludge Handling Products Product line

  • Premium

    PWTech - Model ES353 - Volute Dewatering Press

    This innovative sludge dewatering product offers many advantages over conventional sludge management methods. Originally developed in Japan, the Volute Dewatering Press is patented worldwide, with more than 650 installations. The key to the process is the unique dewatering drum design. This drum is able to achieve both thickening and pressing ...

    By Process Wastewater Technologies LLC based in Rosedale, NORTH CAROLINA (USA). from Biosolids/Sludge Handling Products Product line

  • Premium

    GeneTheatre - Highly Flexible Liquid Handling System

    The use of the GeneTheatre greatly simplifies all pending pipetting tasks in a laboratory and allows for full automation. In addition to microplate handling, this highly flexible workstation also accommodates the use of strips, single vessels and glass slides. Users may choose from 12 freely selctable deck positions in the standard-format SBS, ...

    By Analytik Jena AG based in Jena, GERMANY. from Life Science - Instruments - Liquid Handling Product line

  • Premium

    TodaySure Matthews - Bin Elevator / Tipper Incorporates

    To facilitate establishments where the waste is stored and transported to the incinerator in wheeled bins, a bin tipper can be selected to transfer the waste either directly into the incinerator or into the incinerator via a ram loader. The bin elevator / tipper incorporates a lifting cradle on to which the bin is Bin Tipper’s / ...

    By Todaysure Limited based in Hyde, UNITED KINGDOM. from Waste Loading Product line

  • Premium

    Mercury Waste Treatment Centre

    econ industries is the only company worldwide which operates a complete mercury waste recovery and treatment centre; suitable for processing all types of mercury waste on an industrial scale. The econ industries mercury waste centre combines only the safest and most environmentally friendly technologies available. Utilising our equipment and ...

    By econ industries GmbH based in Starnberg, GERMANY.

  • Waste-Mate - Model 264 - Submersible Sewage/Effluent or Dewatering Pumps

    Float-operated, submersible (NEMA 6), 2-pole switch. Durable, cast iron construction - switch cap, motor and pump housing. Engineered plastic base. Stainless steel screws, bolts, handle, guard, arm and seal assembly. Corrosion-resistant, powder coated epoxy finish. Hermetically-sealed, automatic reset thermal overload protection. Upper and lower ...

    By Zoeller Pump Company based in Louisville, KENTUCKY (USA). from Sewage & Dewatering Product line

  • Premium

    Steel Plant Waste Residues Recovery

    Process and design: The increasing demand to reuse residues from steel plants leads to sophisticated solidification and granulation processes as well as the production of highly viscous suspensions. Materials from very different origins need to be homogenised by turbulent mixing processes to ensure the required consistency for the approptiate ...

    By econ industries GmbH based in Starnberg, GERMANY. from Mixing Applications Product line

  • Premium

    UNTHA - Model XR3000R - Waste Shredder

    With minimal operating costs and maximum performance, the XR is by far the most innovative waste pre-shredder for municipal solid waste (MSW), C&D waste and commercial & industrial waste in the global marketplace. With a completely new drive concept, “UNTHA Eco Drive” guarantees up to 50 % less energy consumption in comparison to conventional ...

  • Premium

    ASTIM - Shaftless Spiral Conveyors

    Shaftless Screw or Spiral Conveyor is an alternative concept to the traditional shafted screw conveyor. Material is conveyed by an extra-heavy-duty shaftless screw that slides on a low-friction, wear-resistant liner inside the conveyor trough housing. Shaftless spiral conveyors are successfully used to transport jamming, bridge forming and sticky ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Material Handling Systems - Conveyors Product line

  • Mobile Compactors (MC)

    The Mobile Compactors (MC) are closed systems to compact and store waste which can be placed at any location and do not require ground fixing or housing in a special building. These compactors have high volumetric efficiency and compaction ratio, rubber seals and power pack with frequency control design. These features deliver many benefits, ...

    By Hyva Holding B.V. based in Alphen aan den Rijn, NETHERLANDS. from Waste Handling Product line

  • Premium

    P. Henkel - Model 660, 770, 1000, 1100 litres, MGB 1100 - Four-Wheel, Standard Containers

    The waste bins are made of injection-moulded polyethylene, using recyclable materials. The high stability and low weight of the four-wheel vessels leads to many benefits: simple handling, easy cleaning, integrated water drain, long service life. The bin is also resistant to chemicals. The four-wheel waste bins are applied with integrated handles ...

    By P. Henkel GmbH based in Kreuztal, GERMANY. from Large Waste Containers Product line

  • Model K.6500 - Electro Polyps

    Suitable for small plants incinerating municipal solid waste and for the handling of materials treated, eg. industrial waste, packaging waste, waste wood.

    By Euromec srl (ISORELLA) based in Isorella, ITALY. from Handling Product line

  • Model I.7000 - I.7100 - I.7200 - I.7300 - Electro Polyps

    Ideal for municipal solid waste and similar. Suitable for small plants incineration of solid urban waste and for the handling of similar materials, eg. industrial waste, packaging waste, waste wood.

    By Euromec srl (ISORELLA) based in Isorella, ITALY. from Handling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you