waste handling Equipment in Alberta

  • Hayward Gordon Torus - Recessed Impeller Vortex Pumps

    A severe duty pump for fluids containing large solids, abrasives, delicate crystals, fibers, and stringy materials. The impeller is completely recessed within the pump, minimizing contact with the process fluid and allowing clear passage of solids without clogging.

    By Hayward Gordon Ltd. Office in Calgary, ALBERTA (CANADA). from Solids Handling Pumps Product line

  • Defracking System

    We take this opportunity to introduce ourselves as a Corporate Body focused on various treatment processes for the treatment and reuse of water for different applications. We have implemented advanced technologies across various geographies to address the Global Concern for tackling problems of water shortage, recognizing that water is a precious ...

    By Shivsu Canadian Clear Office in Edmonton, ALBERTA (CANADA). from Waste Water Treatment Product line

  • Waste-Mate - Model 264 - Submersible Sewage/Effluent or Dewatering Pumps

    Float-operated, submersible (NEMA 6), 2-pole switch. Durable, cast iron construction - switch cap, motor and pump housing. Engineered plastic base. Stainless steel screws, bolts, handle, guard, arm and seal assembly. Corrosion-resistant, powder coated epoxy finish. Hermetically-sealed, automatic reset thermal overload protection. Upper and lower ...

    By Zoeller Pump Company Distributor in ALBERTA (CANADA). from Sewage & Dewatering Product line

  • IPEX - Lubricant Approved For Use With Labline & Plenumline Mechanical Joint Acid Waste Systems

    To complement our line of installation tools, IPEX is pleased to  introduce our new lubricant – approved for use with Labline &  Plenumline Mechanical Joint Acid Waste Systems. IPEX Acid Waste Systems have been regarded as the best in the industry for over 35 years, providing laboratories throughout North American with ...

    By IPEX Office in Edmonton, ALBERTA (CANADA). from Other Product line

  • EnviroHazmat - Hard-Bodied Spill Trays

    Strong & Lightweight; Impact Resistant/Reinforced Corners. Designed for Sub-Zero weather conditions. Flip-Up Handles. Customized for your specific application – Fuel Transfer, Pipe Fittings, Waste Storage Area.

    By EnviroHazmat based in Calgary, ALBERTA (CANADA). from Secondary Containment Product line

  • Eco-Tec RecoPur - Ion Exchange Water Softener

    RecoPur Produced Water Softeners outperform conventional systems and addresses serious concerns for oil producers, such as: Safety and costs related to handling acid and caustic often used for regeneration of produced water softeners. High chemical (salt, acid and caustic) consumption due to the limitations of conventional ion-exchange softener ...

    By Eco-Tec Inc. Office in Calgary, ALBERTA (CANADA). from Produced Water Treatment - for Heavy Oil Operations Product line

  • Model SKU - Solid-A-Sorb

    Solid-A-Sorb® provides a safe and reliable option for cleaning liquid spills and is ideally suited for your waste remediation needs. Its high absorbency meets and exceeds current government regulations, including requirements for radioactive waste disposal. Bioremediation: Solid-A-Sorb is noted for its porosity and extraordinary surface area. ...

    By EnviroGuard Ltd. based in Calgary, ALBERTA (CANADA). from Granular Product line

  • Bio Crude Technologies Products

    There are a number of different products (enzymes) and optimized refined processes that are currently available from BioCRUDE, all scalable and capable of being personalized to the individual needs of each client and project. We started with a self-contained and self-sufficient unit designed (composting and biogas) for small applications, but have ...

    By BioCRUDE Technologies Inc. based in Markham, ALBERTA (CANADA).

  • Soil, Sediment & Sludge Remediation Services

    RECON is an industry leader in soil and sludge stabilization and solidification, having treated over 6 million cubic yards of material. Our employees have hands-on experience with dozens of different reagents, including our patented reagent blend (Muck Mix). RECON has entered into long-term contracts with major reagent and transportation vendors ...

    By Remedial Construction Services, L.P. (RECON) Office in Edmonton, ALBERTA (CANADA). from Environmental Remediation Product line

  • Severe-Duty Grinders

    Effective solids conditioning is critical to achieving efficient and reliable throughput in your wastewater and sludge handling systems. The SEWER CHEWER grinder is a key part of these systems, helping them to operate more efficiently with consistent and reliable solids size reduction. The SEWER CHEWER utilizes a proven counter-rotating dual shaft ...

    By Sanitherm, a Division of Peak Energy Services Office in ALBERTA (CANADA).

  • Model MB - Mini Berm for Compact Secondary Containment

    Used for clean-up operations and spill containment, the Mini-Berm is easily placed under valves and fittings, trucks, drum and machinery. It’s compact enough to fit into tight spaces, yet still built to the toughest specifications, using our rugged chemical-resistant fabrics.

    By EnviroGuard Ltd. based in Calgary, ALBERTA (CANADA). from Secondary Containment - Berms Product line

  • Premium

    Compressor Stations

    In the oil & gas industry you need to focus on getting your product from in the ground to market as quickly and economically as possible. With Innova's new Turnkey Compressor stations, we help you do just that by reducing the cost and time it takes for you to source, design, fabricate, procure, install and commission a compressor station.

    By Innova Global Limited. Office in Calgary, ALBERTA (CANADA).

  • Premium

    AEREON - Model Q-DEC - Quad O Designed Enclosed Combustor

    With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. The QDEC Enclosed Combustor ...

    By AEREON Office in Calgary, AB, ALBERTA (CANADA). from Enclosed Vapor Combustion Systems Product line

  • Global Pump - Stainless Steel Pump

    Electric Submersible Stainless Steel Pumps from Global Pump are designed for service in light acid or salt water applications. The upper cover, pump casing, impeller, motor frame and motor shaft are made of 304 Stainless Steel for superior corrosion resistance. The Global Pump Stainless Steel Pump features an environmentally friendly, oil bathed, ...

    By Global Pump Company - a Mersino Company Office in Acheson, ALBERTA (CANADA). from Submersible Pumps Product line

  • Wallace & Tiernan - Model V10k Gas Feeder - Gas Feed Systems

    The V10k is a remote vacuum solution feeder for use with four of the most commonly used gases for the disinfection and treatment of municipal and industrial water and wastewater. This unit has been built to continue the long standing proven design and features of its predecessor and adds more. The versatility of wall mounting, front access of all ...

    By Mequipco Ltd. based in Calgary, ALBERTA (CANADA).

  • Premium

    AMS - Dual-Purpose Soil Recovery Probes

    AMS Dual-Purpose Soil Recovery Probes can be used with or without liners. AMS dual-purpose soil recovery probes include the slotted soil probe body, top cap, 10' cross handle, a plastic liner, and 2 plastic end caps. The probe body has a window slot that allows for direct observation of the soil samples after the soil samples have been collect ...

  • Eco-Tec AnoPur - Acid Purification For Aluminum Anodizing

    AnoPur  is a version of Eco-Tec’s Acid Purification Systems specifically adapted for purification of sulphuric acid used in aluminum anodizing. Hundreds of AnoPur units are in operation in anodizing facilities around the world. The Anopur is used to continuously remove dissolved aluminum from sulfuric acid anodizing baths in order to ...

    By Eco-Tec Inc. Office in Calgary, ALBERTA (CANADA). from Acid Purification Product line

  • Blue PRESS - Dewatering Technology

    The Blue PRESS screw press product line is a result of over 40 years of dewatering technology experience. Blue Water offers the press as a stand-alone solution depending on customer needs or as an integral piece of a treatment solution. With an application history across various industries and processes, the Blue PRESS screw press is a customized ...

    By Blue Water Technologies, Inc. Distributor in Sherwood, ALBERTA (CANADA). from Eco MAT Rotating Belt Filter Product line

  • Pup - Side Loaders

    The pup is ideal for parks and recs, beaches and resorts, campuses, zoos and mobile home courts. Wherever larger refuse trucks can’t go or are not practical. The easy access side doors allow loading of bags, cans, and boxes. Add the barrel or cart dumper and handle residential trash containers!

    By Wayne Engineering Distributor in Lethbridge, ALBERTA (CANADA). from Side Loaders Product line

  • Model IPP - Horizontal Process Pumps

    The IPP pump is a process pump designed to meet dimensionally the ANSI/ASME B73.1-2001 standard. These versatile pumps efficiently handle a wide range of corrosive and non-corrosive liquids ranging from water to hydrocarbons to slurries.

    By RUHRPUMPEN GmbH Distributor in ALBERTA (CANADA). from Single Stage Overhung Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you