Only show results in Connecticut? Ok

waste handling installation equipment

  • Premium

    Presona - Waste Sorting Plants

    We are specialized in designing customized, cost effective installations for waste handling and garbage baling. A typical sort plant can be designed for two or more fractions with a yearly material flow of 30.000 to 300.000 tonnes. Presona offers each customer an optimum solution – with respect to individual components and the entire system. ...

    By Presona AB based in Tomelilla, SWEDEN.

  • Premium

    Presona - Model 40 OH - Hydraulic Horizontal Channel Baler

    The Presona 40 OH is developed for efficient waste paper handling in the packaging and printing industries. The 40 OH has a very compact design and is extremely space saving. The OH model is equipped with a horizontal tying device with curved needles and has the hydraulic unit mounted directly onto the baler which makes it compact and easy to fit ...

    By Presona AB based in Tomelilla, SWEDEN.

  • Premium

    Inciner8 - Model I8-1000G - General Incinerator

    The I8-1000G model is our largest incinerator giving you high volume capacity for your waste needs. This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. Featuring our SMARTPANEL technology, this system can 'learn' about your waste stream, then via remote diagnosis we can fine tune its ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators - Waste Incinerator Range Product line

  • Medical Waste Handling

    Medical waste in health facilities have electronic weighing of vehicles to determine the amount of medical wastes.In addition, medical waste, the collection of health facilities and medical waste transportation vehicle used for the three units.These tools are prepared in accordance with the regulation. Characteristics of waste was completely ...

    By Kent Environment based in Malatya, TURKEY. from Transport Product line

  • Bio - Water Treatment Systems

    These increase the cost or even prevent the discharge of waste to the sewer or watercourse and often exclude the recycling of the water. One approach is aerobic treatment in a biological plant. Traditional processes are very large (with consequential high cost) and are limited in the strength of waste they can handle. WMEC’s bio plant is ...

    By WMEC Limited based in Chichester, UNITED KINGDOM.

  • Dragon - Model 118 Series - Centrifugal Pump

    Whether you need centrifugal pumps or heavy-duty pumps for handling solid waste and trash, Dragon has you covered. We carry a full line of pumps that can run on a variety of fuels – electric, diesel, or natural gas. Dragon will also help you select the right pump with the right pressure to insure you don’t incur extra horsepower ...

    By Dragon Products, Ltd - Modern Group LTD based in La Porte, TEXAS (USA). from Centrifugal Pumps Product line

  • BossKart - Model 96 & 65 gallon - Rotational Waste Handling Systems

    The 'Boss-Kart'™ is one of the strongest, rotationally-molded carts available for automated and semi-automated waste handling. With both a 96-gallon and the new, mid-size 65 gallon models, Boss-Kart fit a full range of collection programs. Pleated sidewalls give the Boss-Kart exceptional vertical strength. The pleat ...

    By Ameri-Kart Waste Handling based in Wichita, KANSAS (USA). from Residential Waste Handling Systems Product line

  • Stokota - Drain Force for Large Jetting Flows

    When large jetting flows are required for the job, our DRAIN FORCE is the vehicle you require. The standard Drain Force is well equipped to handle all cleaning of drains of up to 1.500mm in diameter. It is build on a 4-axle rigid chassis and is equipped with a sludge barrel in SS. The large jetting water tank is executed as saddle water tanks to ...

    By Stokota NV based in Lokeren, BELGIUM. from Waste & Cleaning Product line

  • Incinerator For Cemetery Waste

    The SO series solid waste pyrolytic incinerator, thanks to its minimal installation and maintenance requirements and its ease of handling, enables high performance at low cost.

    By Kalfrisa, S.A. based in Zaragoza, SPAIN. from Waste Valorization - Funeral Sector Product line

  • FSM - Back Pressure Device

    The FSM back pressure device is an optional extra which is installed downstream of a screenings washing press to optimise the dry solid matter content (TS). The FSM screening washing press is synonymous with hygienic and efficient handling of screenings. Waste disposal is a cost factor at every installation – wet screenings are heavy ...

    By FSM Frankenberger GmbH & Co. KG based in Pohlheim, GERMANY. from Screenings Handling Product line

  • Model 2EHA-2-BIS-G - Solid Waste Drying Compressor

    This compressor was installed in a solid waste drying plant, taking advantage of the generated biogas (biometanization). The compressor was in a safe zone and handled quite a high content of H2S.

    By Abc Compressors based in Eibar, SPAIN. from Waste Treatment & Biogas Product line

  • Huber - Rotary Screw Thickener

    There are over 1000 HUBER thickeners installed worldwide including many in Australia. The rotary screw thickener is designed for thickening of waste activated sludge prior to dewatering or stabilisation at larger STP’s. Good sludge thickening is required as a prerequisite for the efficient further treatment or dewatering of sewage sludge.

    By Hydroflux Epco based in Sydney, AUSTRALIA. from Sludge Handling Product line

  • Excellent - Model 500A-ATF - Food Waste Disposers System

    With an ATF assembly installation is simplified as no welding is required when mounting on-site in the kitchen. The unit is installed in the sink’s existing drain outlet using a screw joint reinforcement and designed for continuous feeding of food waste which means effective handling of large amounts of food waste without unnecessary ...

    By Disperator AB based in Segeltorp, SWEDEN. from Food Waste Disposers Product line

  • PowerVac - Vacuum Unit

    The PowerVac is the most powerful and state of the art vacuum unit of its kind. It is capable of handling all your local and industrial suction jobs like catch basin draining, debris removal, tank emptying, etc. The PowerVac can be used in the chemical and petro-chemical industries for a variety of dangerous products, as well as in all other ...

    By Stokota NV based in Lokeren, BELGIUM. from Waste & Cleaning Product line

  • AirShark - Model AS - Separators and Cyclones

    The AirShark provides a simple and effective method of separating waste paper, plastic films, trimmings and other light fraction materials typically handled in air conveyance systems. The fully sealed rotor provides a positive seal at the material discharge to maintain a clean environment in your facility. This versatile unit can operate under ...

    By Advanced Equipment Sales (AES) based in Souderton, PENNSYLVANIA (USA). from Other Products Product line

  • Bollegraaf - Model HBC Series - Fully Automated Balers

    The Bollegraaf fully automated HBC balers turn large quantities of waste into homogenous bales. The installations are perfect for wastepaper, cardboard, synthetics and cans, and can deal with all these types of waste without any problems.The capacity and compaction force of the HBC balers ranges from 25 to 180 tonnes. This means that capacity can ...

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS. from Balers Product line

  • Self Contained Waste Compactors

    GTS offers Self-Contained Compactors (1yd and 2yd packing chamber size) with containers available ranging from 10yd to 38yds total. The compactor’s liquid tight containment provides a clean method to handle any type of trash and is perfect anytime liquid is present. Hydraulic Tailgate models are also available for chute, dock, or other ...

    By Global Trash Solutions (GTS) based in Lake Park, FLORIDA (USA). from Compactor Product line

  • Fiberglass Triple Garage Basins

    Triple garage basin systems, manufactured by TOPP Industries, are designed to help garage areas and other facilities handle the volatile wastes that they generate. Installation of a triple garage basin system reduces the possibility that volatile wastes will enter the sewer system where they could potentially explode. The volatile wastes, which ...

    By Topp Industries Inc. based in Rochester, INDIANA (USA). from Fiberglass Basins Product line

  • Elevators

    Working from concept design through to manufacture and installation our design engineers are on hand to discuss and visit your materials handling site to identify the best solution to save time, labour and increase efficiency of your handling processes. Tong Peal’s range of static elevators can be constructed to handle a wide range of ...

    By Tong Engineering Ltd based in Spilsby, UNITED KINGDOM. from Conveying Product line

  • Medical Waste Shredder

    Our custom designed medical waste reduction systems are designed to meet regulatory requirements. In addition, we offer the same basic single and dual stage shredder systems that have been installed with AMSCO (STERIS Corporation) Eagleguard medical waste autoclaves in past years. This proven shredding system can be configured to meet numerous ...

    By George K. Moss Co., Inc. based in Birmingham, ALABAMA (USA). from Medical Waste Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you