waste handling operations equipment in Denmark

  • Moldow - Transflow Waste Handling System

    Moldow Transflow System provides trouble free extraction of very large quantities of dust and chips with unlimited volumes of extracted air. The Transflow System was developed to increase flexibility of operation on heavily loaded extraction systems.

    By Moldow A/S based in Holsted, DENMARK. from Transflow Waste Handling System Product line

  • Premium

    Presona - Waste Sorting Plants

    We are specialized in designing customized, cost effective installations for waste handling and garbage baling. A typical sort plant can be designed for two or more fractions with a yearly material flow of 30.000 to 300.000 tonnes. Presona offers each customer an optimum solution – with respect to individual components and the entire system. ...

    By Presona AB Office in TOMELILLA, DENMARK.

  • DCB - Waste Cranes

    We supply semi- and full-automatic cranes for handling of waste at incineration plants and at recycling stations. There is made a distinction between untreated and pre-treated waste. Untreated waste often has to be shredded before further handling. Operations are then handled from operator chair, by radio control or full automatic. The cranes are ...

    By Danish Crane Buildings A/S (DCB) based in Nibe, DENMARK. from Waste Cranes Product line

  • Model EPC and MiniEPC - Heavy Duty Waste Compactors

    Europress EPC compactors are equipped with a pre-compacting feature, for handling extremely large quantities of waste. When the waste is hard, inconveniently shaped or comes in very large single loads, it is wise to crush it before the final compression. Instead of normal compression cycle, EPC compactors performs dual operation: first crushing ...

    By Europress Group Oy Office in Næstved, DENMARK. from Heavy Duty Waste Compactors Product line

  • Premium

    Presona - Model K - Stationary Compactor

    We design and supply turn-key compactor systems to meet all needs, large and small. Our experience and knowledge combined with a wide range of models and accessories ensures maximum customer benefit. With the K 230/330 M model, Presona address the needs of users with high demands in terms of reliability and performance. Presona’s compactor ...

    By Presona AB Office in TOMELILLA, DENMARK.

  • High-Tip : Reception/Transfer Container

    The cost of transporting dewatered sludge to landfill sites can be reduced significantly if you choose the MOOS High Tip System for on site accumulation of for example dewatered sludge from the jet-vac, tankers, MOOS KSA system etc. The dewatered waste which has remained in the initial High Tip reception container will at some point accumulate and ...

    By Simon Moos Maskinfabrik A/S based in Sønderborg, DENMARK.

  • Premium

    AERZEN Turbo Generation - Model 5 - Turbo Blowers Generation for Sewage Treatment Processes

    For the maximum of energy efficiency in waste water treatment. Designed to handle unsolved energy problems. This is the key unit for more energy efficiency, as single oder combination design – and the power behind every municipal or industrial waste disposal facility: the AERZEN Turbo Generation 5. Unbeatable, AERZEN’s mix of blower, ...

  • Bramidan - Model X30 - Vertical Balers

    Handling bulky waste; The X30 is suitable for retail shops and industrial companies with large quantities of waste. It is a compact machine with high capacity and superior press force. This baler has a very wide filling opening for handling larger boxes, making the daily operation as easy as possible. The finished bale can be tied with flat straps ...

    By Bramidan Balers based in Bramming, DENMARK. from Vertical Balers Product line

  • GRI - Logistic System

    Gypsum Recycling International has developed and operates a unique logistics system that minimizes the transport and handling costs: Containers are located at new building sites, reconstruction and demolition sites, at waste transfer stations, civic amenities and other locations where waste is stored temporarily or sorted.

    By Gypsum Recycling International based in Naerum, DENMARK. from Logistic System Product line

  • Bramidan - Model Marine X25 - Compact Balers

    The Marine X25 is built with a superior press force for rational waste handling on ships, rigs and shipyards. It is a compact machine, which is ideal to install where space is limited. This baler has a wide filling opening, which makes the compression of waste and daily operation as easy as possible.

    By Bramidan Balers based in Bramming, DENMARK. from Compact Balers Product line

  • Bramidan - Model Marine X10 - Compact Baler

    Limited space for waste at sea The Marine X10 is a compact baler built for rational waste handling on board vessels where space is limited. Equipped with cross cylinders, this machine offers superior press force. The relatively large filling opening makes the daily operation as easy as possible.

    By Bramidan Balers based in Bramming, DENMARK. from Compact Baler Product line

  • Premium

    HSM - Model HL 4812 - 15 kW Horizontal Baling Presses / Horizontal Balers

    These two baler models have been designed with an operating concept and technical features in mind to make it the optimum machine for food retailers and small central storage facilities. The HL 4010 can be fed continuously and easily via a lifting and tilting device which delivers cardboard from the waste container directly into the press chamber. ...

    By HSM GmbH + Co. KG Office in Frickingen, DENMARK. from 15 kW Horizontal Baling Presses / Horizontal Balers Product line

  • Premium

    HSM - Model HL 4812 - 22 kW Horizontal Baling Presses / Horizontal Balers

    These two baler models have been designed with an operating concept and technical features in mind to make it the optimum machine for food retailers and small central storage facilities. The HL 4010 can be fed continuously and easily via a lifting and tilting device which delivers cardboard from the waste container directly into the press chamber. ...

    By HSM GmbH + Co. KG Office in Frickingen, DENMARK. from 22 kW Horizontal Baling Presses / Horizontal Balers Product line

  • Bramidan - Model X30 HD - Vertical Balers

    The X30 HD is suitable for retail shops and industrial companies with large quantities of waste. It is a compact machine with high capacity and superior press force. This baler has a wide filling opening for handling larger boxes, making the daily operation as easy as possible. The finished bale can be tied with polyethylene twine or steel wires.

    By Bramidan Balers based in Bramming, DENMARK. from Vertical Balers Product line

  • Model H&G Series - Screw Compactors

    A screw compactor is an excellent choice when dealing with large amounts of cardboard or if they are thick. The machines are best suited for handling cardboard and waste tree materials and PET plastic bottles. H&G Screw differs from normal compactors because of it’s technology. Instead of a normal piston there is as large and powerful ...

    By Europress Group Oy Office in Næstved, DENMARK. from Screw Compactors Product line

  • Premium

    LAR - Model QuickTOCultra - Online TOC Analyzer for the rough stuff

    LAR's TOC analyzer QuickTOCultra is the most reliable measurement system for the roughest waste water applications. Due to an unrivaled injection and oxidation technique, the QuickTOCultra easily handles sticky, fatty, salty, and high-particle samples unlike other TOC analyzers.The combustion leader in TOC analysis provides maximum reliability and ...

    By LAR Process Analysers AG Distributor in DENMARK. from Online TOC Analyzer for the rough stuff Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you