Waste Incineration Plant Equipment
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-3000 is an online particulate monitoring system, which realizes integration of multi-parameter monitoring technique and solves technical problem of the uncontrolled emission. It is designed for construction sites, roads, living areas, factory sector, tourism, waste incineration plants and other construction sites and production ...
-
ShowcaseManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 82 S is the next generation in measuring NOx. Unique in speed and precision, the nCLD 82 S is modular designed and expandable to additional nitrogen based parameters. Its new and intuitive user interface “GUI“ also individually displays and connects to other instruments’ ...
-
PremiumManufactured by PTF Häusser GmbHbased in GERMANY
Wrapped square bales are frequently sent to waste incinerator plants for burning. The bales need to be broken up at the plant prior to incineration. This first requires cutting of the binding wires on the bale, followed by cutting open of the film to release the product from the wrapping. The Rotowrap BO (Bale ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
: coal-fired power plant, waste incineration power plant, chemical plant and so on ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
AMETEK Land, Land Instruments International Ltd, formally announces that from the 30th September 2019 the Model 9100 Cross-stack Carbon Monoxide (CO) Monitor will be discontinued from new product ...
-
PremiumManufactured by ENVEAbased in FRANCE
Technically identical to the SM-4, this device is ideal for mercury determination at varying sites. The SM-4 Mobile by Mercury Instruments has been developed on the basis of the well proven SM-4 mercury stack gas monitor. Its measurement principle and technique, its thermocatalytic reactor, the detector and the sample probe are identical with those of the stationary ...
-
PremiumManufactured by ENVEAbased in FRANCE
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-3000C environmental quality monitoring system can continuously online monitor related parameters, including particulate matter concentration, temperature, pressure, humidity, wind direction, wind speed, noise and calculate air quality as well as total particulate matter for effective management of measured data. The system is an online particulate matter TSP monitor system, realizing ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
FT-3000 is a gas online continuous monitoring system based on fourier transform infrared spectroscopy, monitoring emission gas of SO2, NOx (NO NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O and other components at the same time. According to user demand, the analyzer can be extended to measure SO3, N2O and etc. It has high accuracy, wide dynamic range, low detection limit and is suitable for ultra-Iow ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The plant is controlled and policed by an all encompassing supervisory propriety human machine interface based control system. The system will constantly monitor the plants performance and automatically trim and correct any out of tolerance ...
-
PremiumManufactured by ENVEAbased in FRANCE
chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
The ITK Envifront TAS process is developed for cleaning of flue gasses through so called dry adsorption and is specially suited for crematories, small waste incineration plants or hazardous waste incineration plants. The system is dimensioned for plants with a size of 100-2000 ...
-
Manufactured by FORCE Technologybased in DENMARK
Under EU legislation, waste incineration plants and major firing plants (power stations) must ensure that the results of the measurements they make using their own measuring equipment in chimneys is functioning correctly. This is done through compliance with a relatively new European ...
-
based in SWITZERLAND
Incineration of wastes releases pollutants, which are often found in flue gas. CTU Clean Technology Universe AG (CTU) offers ecological and economical gas cleaning solutions for: Municipal solid waste incineration plants, Hazardous waste incineration plants, RDF ...
-
Manufactured by Ventilatorenfabrik Oelde GmbHbased in GERMANY
Large and special fans from Venti Oelde are used in almost all key industries. They are the “heart” of industrial plants and processes, as they are mostly in use around the clock, for example in the cement and steel industries as well as in the chemical industry and refining plants, in power stations and waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you