waste plant equipment in Illinois

  • Combustion Chamber

    Heavily polluted exhaust and halogen contamination can increase the risk of corrosion in exhaust air purification plants. In such cases, an Eisenmann combustion chamber is the perfect solution. Eisenmann combustion chambers are also highly suitable for the safe treatment of explosive exhaust gases, especially from the chemical, ...

    By Eisenmann Office in Crystal Lake, ILLINOIS (USA). from Combustion Chamber Product line

  • Self Priming Pumps

    Ideal Usage: Refineries, chemical facilities, waste water treatment plants, construction site dewatering.

    By BakerCorp Office in Chicago Heights, ILLINOIS (USA). from Self Priming Pumps Product line

  • Premium

    Opsis - Model 400Hg TGM - Differential Optical Absorption Spectroscopy (DOAS) System

    Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

    By Opsis AB Office in Chicago, ILLINOIS (USA). from Differential Optical Absorption Spectroscopy (DOAS) System Product line

  • BIBKO - External Bucket Row

    A ComTec machine equipped with an external row of buckets. This compact solution lifts the waste from washing out concrete pumps or the batching plant into the ComTec without placing the machine below ground level.  The external buckets are mounted on an extension of the main shaft of the machine.

    By BIBKO Umwelt- und Reinigungstechnik GmbH Office in Cedar Falls, ILLINOIS (USA). from External Bucket Row Product line

  • Premium

    Opsis - Model 400CS - Cross-Stack System

    System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or DOAS technique (Differential Optical Absorption Spectroscopy), allowing continuous monitoring of several compounds.

    By Opsis AB Office in Chicago, ILLINOIS (USA). from Cross-Stack System Product line

  • PCME - Model QAL 181 - Particulate Continuous Emission Monitor

    The PCME QAL 181 is an approved Particulate Continuous Emission Monitor (CEM) providing high quality emission measurement for low dust concentrations from industrial processes, especially in Incineration, Power Plant and Cement Kiln applications. The instrument provides a proven solution for applications where CEN standards EN 14181 / EN 13284-2 ...

  • Resilient Seated Butterfly Valves

    Resilient-seated, butterfly valve for flange mounting to pipelines; concentric disc design; with replaceable liner. Suitable for use in cooling towers, waste-water applications, water treatment, water distribution, dams, gas main and service lines, pressure stations, gas storage tanks, power plants and gas pipelines industry.

    By Aira 4matic Valve Automation based in Chicago, ILLINOIS (USA). from Resilient Seated Butterfly Valves Product line

  • Hydrosil - Model HS-CL - Sodium Thiosulfate Impregnated Media

    Sodium thiosulfate impregnated media. Hydrosil HS-CL is used to remove chlorine or chlorine dioxide from air streams. These air streams are typically generated by bleach plants in pulp and paper facilities, chemical, fresh and waste water treatment plants. The chemisorption taking place in the removal of the pollutant gas with its’ ...

    By Hydrosil International based in Elgin, ILLINOIS (USA). from Sodium Thiosulfate Impregnated Media Product line

  • Anaerobic Digester Floating Covers

    The bacteria used in the anaerobic digestion of organic waste can exist only in an oxygen-free environment, and they work faster at elevated temperatures. MPC’s floating covers keep the bacteria’s temperature stable, and eliminate odor by containing the methane that the bacteria expel. The methane can then be burned off, used as power ...

    By MPC Containment based in Chicago, ILLINOIS (USA). from Anaerobic Digester Floating Covers Product line

  • BIBKO - Model RWS - Recycling System

    A screw type system, developed for the recycling of waste concrete and washing water in small size amd mobile plants (1 - 5 mixer trucks).The screw is adjustable to compensate for any wear on the flights, maintaining the quality of reclaimed aggregates. Receiving hoppers are available in various configurations and sizes to suit individual needs. ...

    By BIBKO Umwelt- und Reinigungstechnik GmbH Office in Cedar Falls, ILLINOIS (USA). from Recycling System Product line

  • Offset Disc Butterfly Valves

    Double-offset flanged butterfly valve (resilient-seated), available with long or short face-to-face length for use in most common flow control applications. Long service life, as the media does not come into contact with the bearing, and due to the wear-resistant, corrosion and infiltration-proof seat with weld overlay. Suitable for use water ...

    By Aira 4matic Valve Automation based in Chicago, ILLINOIS (USA). from Offset Disc Butterfly Valves Product line

  • Industrial SCR Systems

    Fuel Tech has extensive SCR design experience and understands “real world” plant operations, and has been applying this know-how on a wide range of SCR applications around the world. These projects include boilers, incinerators, reformers and many other types of heat recovery equipment firing coal, gas, oil, and a variety of process ...

    By Fuel Tech, Inc. based in Warrenville, ILLINOIS (USA). from Industrial SCR Systems Product line

  • Justice - Model LJ6 Series - Open Hopper Progressive Cavity Pump

    The Justice LJ6 Series Open Hopper Progressive Cavity Pump represents an ideal pumping solution for viscous solutions with high solids contents such as rendering plant wastes in the poultry, pork and beef industry. Flow rates of 5.20 GPM per 100 Revolutions (10 GPM to 23 GPM) at 225 PSI are standard through the range of the series. The Justice ...

    By Liberty Process Equipment, Inc. based in Arlington Heights, ILLINOIS (USA). from Open Hopper Progressive Cavity Pump Product line

  • PCME - Model QAL 991 - Particulate Continuous Emission Monitor

    The PCME QAL 991 is an approved Particulate CEM (Continuous Emission Monitor) designed to meet and exceed CEN standard EN 14181 / EN 13284-2. Particularly suited to monitoring emissions from industrial processes regulated under the European Waste Incineration Directive (WID) and Large Combustion Power Plant Directive (LCPD), the PCME QAL 991 is ...

  • Hand or Air Operated GoatThroat Pumps

    GoatThroatâ„¢ pumps are simple, safe, and cost effective. They fit nearly any container from 5 to 55 gallons. The pump is leak-proof, spill proof, and splash-proof to prevent hazardous waste of your inventory. One touch flow control dispenses at a controlled rate up to 4 gallons per minute, depending on viscosity. Pumps are available with the ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Premium

    BioFicient - Wastewater Treatment Systems

    The patented BioFicient Process presents an innovative approach for pre-engineered wastewater treatment systems: specifically, reducing biosolids wasting and handling requirements. This means no complex plant operation or RAS/WAS calculations and minimal reduced biosolids to handle, haul and dispose.

    By Smith & Loveless Inc. Distributor in Moline, ILLINOIS (USA). from Wastewater Treatment Systems Product line

  • Premium

    Komline-Sanderson - Paddle Dryer for Biosolids, Sludge, and Residuals Drying

    The K-S Paddle Dryer is used worldwide for drying a variety of sludges, biosolids and by-products, to generate dry stable products, reduce disposal cost and convert waste into marketable by-products. In municipal waste water treatment plants (MWWTP) the K-S Paddle Dryer System produces Class A Biosolids in accordance with the EPA's 503 regulations ...

    By Komline-Sanderson Distributor in Moline, ILLINOIS (USA).

  • UNTHA - Model S40 - Rugged Waste Shredder

    For continuous operation with high throughput performance particularly for organic waste. The S40 is a rugged shredder with a particularly high throughput performance. Thanks to its special design this shredding machine is particularly well suited for biological and biogenic waste. Special sealings protect critical components from aggressive plant ...

    By UNTHA Shredding Technology Gmbh Distributor in ILLINOIS (USA). from Rugged Waste Shredder Product line

  • EDUR - Model Bloc FUB-CBF - Torque Flow Pumps

    Torque-flow pumps in compact bloc-design for the transport of liquids being contaminated with solids or suspensions. Typical liquids to be pumped are waste water, cooling agents contaminated with metal chips, abrasive oils and lyes, lime milk and also products that have to be transported with care. Main application in sewage water plants, ...

    By EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG Distributor in Arlington Heights, ILLINOIS (USA).

  • Model F-10300 - Process Centrifuge

    F-10300 Process Centrifuge has been a workhorse for industrial applications. From wastewater to wine, this is the centrifuge that process engineers rely on more than any other. Just load and go. The digital countdown timer alerts you at cycle end. Tracking the percent of solids in a given sample provides operators with proactive information for ...

    By Raven Environmental Products, Inc. Distributor in Hanover Park, ILLINOIS (USA). from Process Centrifuge Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you