waste press equipment in Russia

  • X-Press - Model 300

    The waste press Models 300 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ground and offshore environments.

    By Mil-tek Office in Saint Petersburg, RUSSIA. from X-Press - Model 300 Product line

  • X-Press - Model 400

    X-PRESS GENERAL WASTE COMPACTOR MODELS 300 AND 400. The waste press Models 300 and 400 can be fitted with wheels making it easy to move the waste compactor around to various locations. Being mobile also makes cleaning the waste compactor much easier. Alternatively, the waste press models 300 and 400 can be fastened to the floor, perfect for uneven ...

    By Mil-tek Office in Saint Petersburg, RUSSIA. from X-Press - Model 400 Product line

  • X-Press - Model 100

    Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly ...

    By Mil-tek Office in Saint Petersburg, RUSSIA. from X-Press - Model 100 Product line

  • EKOTON Industrial Group - Model PVOE - Screw Dewatering Presses

    Screw dewatering presses, manufactured by EKOTON Company, are used for the compression and transportation of wastes from screening devices (screens, sieves etc.) to accumulation tank or conveyor. Dewatering presses achieve 70-75% reduction of the volume of wastes before dumping it to receiving tank. It is well-proven in combination with EKOTON ...

    By EKOTON Industrial Group based in Belgorod, RUSSIA.

  • X-Press - Model 200

    Waste Compactors model X-Press are unique compactor solutions for compacting general waste into manageable plastic bags. The volume reduction achieved by compacting the waste is at a ratio of up to 10:1. The X-Press waste compactors can either be located close to the source of waste or in a designated area where the bags can be placed directly ...

    By Mil-tek Office in Saint Petersburg, RUSSIA. from X-Press - Model 200 Product line

  • Premium

    Presona - Model DH & XH - Unique Two-Step Pre-Press System

    The DH and XH balers are all equipped with Presona’s unique two-step pre-press system. This system allows a feed opening of 2200 mm – all the way from the feed opening down to the bottom of the press chamber. The powerful XH balers with a combined press force of 210 tons, channel format 1100 x 1100 and a power pack of 2 x 75 kW ...

    By Presona AB Office in St Petersburg, RUSSIA.

  • Danieli - Model CIV - Scrap Shears with Press-Wings

    Versatility and flexibility are the hallmarks of the CIV range! Scrap shears with press wings are designed to give the customer full control over their operation – either reducing your scrap metal to obtain a bale, or shearing it. The range is designed to suit every size of operation, from a one-piece portable shear complying ...

    By Danieli Centro Recycling Office in Moscow, RUSSIA. from Scrap Shears with Press-Wings Product line

  • WEIMA - Model WL 6s - Universal Shredder Used for Wood and Timber Waste

    The WL 6s shredder is used for shredding large quantities of wood and timber waste. The machines are fitted with very high powered rotors of 800 mm width. The rotor diameter is 368 mm. The large rotor and the wrap angle of the screen ensure high throughput rates. Machines with a drive output of 30 kW or more are fitted with a hydrodynamic clutch, ...

    By WEIMA Office in Korolev Town, RUSSIA. from Universal Shredder Used for Wood and Timber Waste Product line

  • Premium

    KAHL - Model O-500/390 - Overhead Drive Press for the Granulation of Pasty Products

    Granulation (pelleting) of raw materials, finished products, and waste can be achieved economically utilizing our ”horizontal flat die extrusion press“ compacting system. For processing of pasty products, the type O series = overhead drive has been developed. These presses are for example appropriate for catalysts, pigments, washing ...

    By Amandus Kahl GmbH & Co. KG Distributor in Veliki Novgorod, RUSSIA. from Overhead Drive Press for the Granulation of Pasty Products Product line

  • Premium

    Presona - Conveyor Systems

    We supply conveyor systems from well reputed manufacturers to all our baler models and systems. We can offer all the different conveyor types and qualitites required for the optimized functionality of the baling press plant, sorting or waste extraction system. The product range consists of robust chain apron conveyors to slider belt and ...

    By Presona AB Office in St Petersburg, RUSSIA.

  • Premium

    ANDRITZ - Partial Sludge Drying

    Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, ...

    By ANDRITZ Separation - ANDRITZ Group Office in Moscow, RUSSIA. from Partial Sludge Drying Product line

  • Premium

    Sludge Drying Process System

    Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry ...

    By ANDRITZ Separation - ANDRITZ Group Office in Moscow, RUSSIA. from Sludge Drying Process System Product line

  • Henschel - Model PDC range - Double-Acting Balers

    DANIELI HENSCHEL range are especially recommended for continuous compaction of small-sized products, such as metal offcuts (copper, aluminium, zinc, steel, etc.).For your industrial applications or at recycled waste sorting plants, DANIELI HENSCHEL offers a range of nine double-acting press models, to produce up to 5 t/h of aluminium or 10 t/h of ...

    By Danieli Centro Recycling Office in Moscow, RUSSIA. from Double-Acting Balers Product line

  • Model R16 - Rear Loader

    Rear loaders – combination of time-proved reliability and affordable price. In developing rear loaders, we have used advanced manufacturing technologies, which were tested and proven by time and intensive operation. For real loaders we have developed pressing mechanism which ensures a high level of compression of waste. The body is made from ...

    By Ecopess Group Office in St. Petersburg, RUSSIA. from Rear Loader Product line

  • WEIMA - Model WL 20 - Single-Shaft Shredder

    The WL 20 single-shaft shredder is used in the woodworking industry for shredding large quantities of timber waste. The rotor width is 2000 mm. The machine is driven by an electric motor with an output of 55 kW to 110 kW. The level of required drive output depends on the material to be shredded, the number of shredding knives being used and the ...

    By WEIMA Office in Korolev Town, RUSSIA. from Single-Shaft Shredder Product line

  • WEIMA - Model WL 6 - Universal Shredder

    The classic model for shredding all kinds of wood waste. Thousands of shredders are used all over the world from small to medium sized businesses. The WEIMA shredder distinguishing feature is a very rugged construction enabling an extremely long service life (even in outdoor operations). The global popularity of this shredder series assures high ...

    By WEIMA Office in Korolev Town, RUSSIA. from Universal Shredder Product line

  • WEIMA - Model WL 15 - Single-Shaft Shredder

    The WL 15 single-shaft shredder is used in the woodworking industry for shredding large quantities of timber waste. The rotor widths is  1500 mm. The machine is driven by an electric motor with an output of 37 kW to 75 kW. The level of required drive output depends on the material to be shredded, the number of shredding knives being used and ...

    By WEIMA Office in Korolev Town, RUSSIA. from Single-Shaft Shredder Product line

  • WEIMA - Model WL 4 - Universal Shredder

    The classic model for shredding all kinds of wood waste. Thousands of shredders are used all over the world from small to medium sized businesses. Their distinguishing feature is a very rugged construction enabling an extremely long service life (even in outdoor operation). The global popularity of this shredder series assures high reliability at ...

    By WEIMA Office in Korolev Town, RUSSIA. from Universal Shredder Product line

  • WEIMA Leopard - Model WLH 400 - Secondary Shredder

    Shredders of the LEOPARD series are designed for shredding long and short timber waste as well as chipboards, strips and packages.  The special chain link in feed even allows the material to be fed into the rotor in packages. The material to be shredded is fed into a vibrating chute with the same width as the shredding machine and fed into ...

    By WEIMA Office in Korolev Town, RUSSIA. from Secondary Shredder Product line

  • WEIMA - Model WL 8 - Universal Shredder

    The classic model for shredding all kinds of wood waste. Thousands of shredders in series WL 4 – WL 6 – WL 8 are used all over the world from small to medium sized businesses. Their distinguishing feature is a very rugged construction enabling offering long service (even positioned outdoors). The global popularity of this shredder ...

    By WEIMA Office in Korolev Town, RUSSIA. from Universal Shredder Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you