Waste Reduction Equipment Near Tuvalu
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Based on the APU system, the AnoPur system is specifically adapted for sulfuric acid purification in aluminum anodizing. Dissolved aluminum is continuously removed from sulfuric acid used in anodizing baths to reduce the contaminants to a consistently low level. This eliminates the need for bath decanting, reduces acid purchasing costs, and ensures a consistent and predictable anodizing ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Etching or chemical milling with caustic soda can often be the greatest operating expense in aluminum anodizing. Our CER Caustic Etch Recovery System continuously crystallizes and removes dissolved aluminum from caustic soda etchants and returns the caustic to the etching/milling tanks for reuse resulting in reduced chemical costs, waste ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The DPU System recovers phosphoric acid and mixed acids in aluminum finishing operations. The system combines a cation resin bed with a water elutable resin bed to economically remove dissolved aluminum from phosphoric acid rinse water, which then concentrates phosphoric acid up to 85% to be ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
production quality and efficiency while reducing chemical purchases and waste treatment ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The Spectrum Plus Filter achieves a high level of performance by using two particulate media layers and a patented backwash process. The upper layer of coarse media allows for an extended service cycle by providing depth filtration of large particles while a lower layer of proprietary, very dense fine polishing media provides surface filtration for smaller particles. This filter is designed to ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The Spectrum Filter achieves a high level of performance by using two particulate media layers and a patented backwash process. The upper layer of coarse media allows for an extended service cycle by providing depth filtration of large particles while a lower layer of proprietary, very dense fine polishing media provides surface filtration for smaller ...
-
Manufactured by PTronik Pty Limitedbased in AUSTRALIA
The pMC Master Controller is a comprehensive system that controls the total function of a dust collector. This advanced system monitors all the functions of a dust collector and has a comprehensive numbers of built-in selectable alarms. These alarms can be general or critical alarms. The master control system includes 10 solenoid outputs that can be expanded to 250 in lots of 10 with the ...
-
Manufactured by Soprema Inc.based in CANADA
The long-term objectives of designing a sustainable roofing system are to keep the system in place as long as possible, delay material disposal in landfill sites, and reduce or eliminate the use of new materials. Energy economy, sustainability, efficient utilisation of raw materials and the reduction of waste should guide roofing ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
As a main raw material, As an operating fluid for cooling and heating, For cleaning, As a supply of drinking water. The high demand of water in breweries makes it a significant cost and quality factor. Berkefeld understands these demands and can provide customized, technically-proven ...
-
Manufactured by IDE Technologiesbased in ISRAEL
Brine treatment and wastewater discharge is a challenge for many industries and needs to be done safely while meeting environmental regulations. But the ideal situation is ZLD (zero liquid discharge), a complete closed loop cycle where discharge is eliminated. IDE partners with customers, particularly in the oil & gas and power industries, to create and achieve a Zero Liquid Discharge plan ...
-
based in AUSTRALIA
Through global research of available waste technologies combined with an independent analysis of thousands of kilograms of waste, Global Renewables was able to develop a patented sorting plant called the ResourceSort which sorts household waste into recyclables and organic materials. This was the first step towards developing the patented ...
-
Manufactured by LeanPath, Inc.based in USA
The LeanPath 360 Food Waste Prevention System is the most complete, automated solution for high-volume operations. ...
-
Manufactured by Tidy Planet Limitedbased in UNITED KINGDOM
The Dehydra Super Compact Dewaterer is the ideal piece of equipment for organisations seeking maximum food waste reduction with minimum footprint. All the Dehydra technology is neatly packed inside a mini unit measuring only 1.0m wide by 0.7 deep. This model can reduce the volume of food waste by up to 80% and its weight by 50%, and can process ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirement by removing the overspray as dry sludge and it goes ...
-
Distributed by KOGA GROUPbased in AUSTRALIA
It is no surprise that all businesses operate today in a global market. To ensure profitability, smart businesses embrace a sustainable strategy of waste reduction on all fronts covering systems, customers and ...
-
Manufactured by Thermal Compaction Group (TCG)based in UNITED KINGDOM
StyroMelt is a green process that first converts Expanded Polystyrene – “EPS” or “Styrofoam” – into a liquid and then cools it into a solid briquette, achieving a reduction in volume by 95%. This material can then be stored indefinitely until it is either sold to recycling companies to be turned into ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The SpiroSand is a simple and reliable piece of equipment that removes sand and heavy sediments as well as floating debris from sewage effluent before they are able to plug equipment or cause abrasive wear to downstream machinery. ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you