Only show results available in Connecticut? Ok

waste reduction system equipment

  • Somat - Model SPC-50S - Waste Reduction System

    The Somat SPC-50S Waste Reduction System processes up to 900 lbs. of food service waste per hour providing an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling. Somat Pulping Systems are engineered to reduce foodservice waste volume by an 8 to 1 reduction (up to 85%.) Compostable waste ...

    By Somat Company based in Lancaster, PENNSYLVANIA (USA). from Close-Coupled Pulpers Product line

  • Somat - Model SPC-75S - Waste Reduction System

    The Somat SPC-75S Waste Reduction System processes up to 1,250 lbs. of food service waste per hour providing an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling. Somat Pulping Systems are engineered to reduce foodservice waste volume by an 8 to 1 reduction (up to 85%.) Compostable waste ...

    By Somat Company based in Lancaster, PENNSYLVANIA (USA). from Close-Coupled Pulpers Product line

  • Muncher - Waste Reduction System

    Eco Sphere Sciences' Muncher industrializes bioremediation via aerobically breaking down green waste, rotten food, meats, derived municipal solid waste (MSW) most organic and some inorganic compounds in a fraction of the time and space which windrow composting and normal remediation methods cannot accomplish. Our process is safer and without the ...

    By Eco Sphere Sciences, Inc. based in Carson City, NEVADA (USA).

  • Model 2001 - Med-Pac Biohazardous Waste Reduction Systems

    Typical use: Hospitals, Nursing Homes, Healthcare Facilities, The cost effective, space efficient solution to handling regulated/mainstream waste Features: 

    By Chicago Compactors & Balers based in Barrington, ILLINOIS (USA). from Industrial Balers Product line

  • Premium

    Plastics Reduction

    Shred-Tech custom designs and manufactures Plastic Reduction Systems to reclaim post consumer and industrial plastic wastes. Dual and four shaft shredders are often used to reduce large molded items, purgings, engineered plastics, film, etc., so that they may be further granulated for reuse in molding or directly to extruding.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA). from Reduction & Recycling Product line

  • Vermeer - Model HG6000E - Electric Horizontal Grinder

    For green waste processing facilities, the Vermeer electric HG6000E reduces organic waste. Install indoors or out, either as a stand-alone unit or as one component in an entire green waste reduction system. Available with either a skid mount or trailer to meet your jobsite requirements.

    By Vermeer based in Pella, IOWA (USA). from Horizontal Grinders Product line

  • Vermeer - Model HG4000E - Horizontal Grinder

    Get performance and on-site power with the stationary Vermeer HG4000E electric powered horizontal grinder. Ideal for municipalities and green waste processors located in urban areas, the HG4000E is adaptable to a wide range of electrical grid systems and configurable to a variety of on-site grinding applications. Additionally, the system can ...

    By Vermeer based in Pella, IOWA (USA). from Horizontal Grinders Product line

  • Model FA200AR - Automatic Framing Station

    FA200AR is an automatic framing station of modules coming from the trimming and taping stations. The cycle starts with the robotized pick up and handle of trimmed and taped laminate through the stations of edge soaping, frame application, fixing and squaring, up to the unloading. This station integration into the production line guarantees ...

    By Rise Technology srl based in S. Martino di Lupari, ITALY. from Finishing Modules Product line

  • Model TT200AR - Automatic Trimming and Taping Station

    TT200AR is an automatic trimming and taping station of modules coming from laminator. The cycle starts with the module loading through the conveyor belt and continues with the first pre-centering of laminate before the robotized handling through the stations for trimming, centering and taping before the unloading. The integration of station into ...

    By Rise Technology srl based in S. Martino di Lupari, ITALY. from Finishing Modules Product line

  • Free Standing Units

    The unit is made up by a stainless steel cabinet containing a commercial food waste disposer fitted with a proper design “intake hopper” to feed food waste inside the disposer and an electrical control panel which runs the whole unit by means of a suitable PLC working software which informs the operator about any possible failures or ...

    By Ecofast Italia S.r.l. based in Milano, ITALY. from Modular Food Waste Reduction System Product line

  • Modular & Remore Dewatering System

    Odour elimination. The dewatered food waste has a very low fermentation rate because most of the water content has been drained. No food waste stored at kitchen level reducing risk of cross contamination. Eliminates transportation of food waste around the premises – reduces labour cost.

    By Ecofast Italia S.r.l. based in Milano, ITALY. from Modular Food Waste Reduction System Product line

  • Medical Waste Shredder

    Our custom designed medical waste reduction systems are designed to meet regulatory requirements. In addition, we offer the same basic single and dual stage shredder systems that have been installed with AMSCO (STERIS Corporation) Eagleguard medical waste autoclaves in past years. This proven shredding system can be configured to meet numerous ...

    By George K. Moss Co., Inc. based in Birmingham, ALABAMA (USA). from Medical Waste Systems Product line

  • Greeny - Model ECV6 - Ecological Waste Compactor System

    Ecological waste compactor system with a reduction of up to 90% of the initial volume. Separation and automatic compacting waste. Steel structure and high quality powder coating. 4 of Patent System Internat. registered. Statement and certification CE registered

    By Eurven Srl based in Trevignano - TV, ITALY.

  • Greeny ECJUNIOR - Ecological Waste Compactor System

    Ecological waste compactor system with reduction of up to 90% of the initial volume. Automatic separation and compacting waste structure in high quality steel and powder coating. 4 of Patent System Internat. registered. Statement and certification CE registered

    By Eurven Srl based in Trevignano - TV, ITALY.

  • Greeny EC-Magic - Ecological Liquid Waste Compactor System

    Ecological waste compactor system with a reduction of up to 90% of the initial volume. Separation and automatic compacting waste . Steel structure and high quality powder coating. 4 of Patent System Internat. registered. Statement and certification CE registered

    By Eurven Srl based in Trevignano - TV, ITALY.

  • Greeny - Model EC2+2 - Ecological Waste Compactor System

    Ecological waste compactor system with reduction of up to 90% of the initial volume. Separation, automatic compacting waste. of high quality steel and powder coating RAL 9016. 4 Patents Covered Systems International of registered system. Compliance: legislation and CE registered certification. Machinery Directive with standards of safety and ...

    By Eurven Srl based in Trevignano - TV, ITALY.

  • Greeny - Model EC3 - Ecological Waste Compactor System

    Ecological waste compactor system with a reduction of up to 90% of the volume iniziale.Separazione and autoshrink rifiutiStruttura of high quality steel and painting polvere.4 of Internaz system Patents. registratiNormativa and certification CE registered

    By Eurven Srl based in Trevignano - TV, ITALY.

  • Midwest Automation - Laminating Systems

    Midwest Automation offers hot and cold adhesive application machinery and pinch roll presses for the panel processing industry with emphasis on case goods, furniture, store fixture, and architectural markets. 'Lower inventories' and 'one-piece-flow' have become the buzzwords of waste reduction manufacturing,and Midwest offers cutting edge machines ...

    By Midwest Group One based in Minneapolis, MINNESOTA (USA).

  • Lean Facilitation

    It is no surprise that all businesses operate today in a global market. To ensure profitability, smart businesses embrace a sustainable strategy of waste reduction on all fronts covering systems, customers and staff.

    By KOGA GROUP based in East Brighton, AUSTRALIA.

  • Cuttopipe - Cutting Modules /-Devices (Inline Cutter)

    Cutting modules /-devices (Inline Cutter) to cut and reduce endless and continuous residual materials into small pieces. Capable for integration into new or already existing waste extraction systems.

    By MATHO Konstruktion & Maschinenbau GmbH based in Ellwangen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you