waste separation Equipment available in Guam

Available in Guam| Near Guam
1676 Results found

We couldn't find any waste separation equipment in Guam

Here is a list of results available in Guam

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: waste separation ×

  • Available in: Asia & Middle East ×

  • Available in: Guam ×


PHOENIX - Model HG Separator™ - Combines Hydrocyclone and Dewatering Screen Systems

by PHOENIX Process Equipment Co.     based in Louisville, KENTUCKY (USA)

PHOENIX is one of the market leaders for construction aggregate and industrial minerals fines recovery and dewatering systems. The PHOENIX Model HG Separator combines hydrocyclone and dewatering screen technology to effectively recover discarded fine sand from wash plant effluents. The dewatering fines are conveyable, stackable and potentially ...


TOMRA - Model COMBISENSE - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The COMBISNESE is a specialized high end machine to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Screens and Screw Presses

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

A broad range of various screens, screws, filters, and sieves make sure that we can offer the most efficient solution for mechanical waste water treatment.

Screenpod - Model Airtrac 1500 - Windshifter - Waste Separation Screen

by Screenpod International     based in Cookstown, NORTHERN IRELAND

Screenpod Airtrac 1500 Windshifter; A compact yet efficient lights recovery separator with the following features: 2 X 7.5 Kw high energy blower units. On-board electrical control panel. Infinitely variable infeed system. Optional fold-away stockpile conveyor. Fast on site setup time – 10 minutes. Fully adjustable air recirculation system.


TiPPS - Model DAF - Dissolved Air Flotation System

by MPP & TiPSS Technologies – Veolia Water Technologies     based in Ede, NETHERLANDS

The VWS MPP Systems TiPPS DAF (Dissolved Air Flotation) system has unique design that contains a plate pack section for enhanced efficiency and reduced footprint requirements and a pneumatic scraper system that optimizes the thickening of the float layer.

TOMRA - Model X-TRACT - Separator with X-ray technology

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The X-TRACT identifies materials irrespective of their surface. With X-ray technology it can separate substances on the basis of their atomic density and is so able to separate material concentrates into differ x-tractent material types.

Model Cube Series - Waste Separation Bin for the Office

by Lune/Brink Industrial     based in Hoogeveen, NETHERLANDS

This cube is an uncomplicated yet stylish replacement for your paper- and litter bin underneath your desk in the office,. The Cube is available in two versions. Cube version 1 exists out of 2 sections (30 litres each) which are devided by a partition. The Cube version 2 exists out of 3 fractions of 11 liters and one paper fraction ...

EMS - Suction Systems for Waste Separation

by EMS Ltd. Environmental Marketing Solutions     based in Killyman, NORTHERN IRELAND

The plastic film / bag removal system is the ideal system to remove any plastic bags from picking lines and to store them any distance away.

Model Split Series - Waste Separation System

by Lune/Brink Industrial     based in Hoogeveen, NETHERLANDS

This waste separation system is available with four waste containers or three waste containers, in steel. The re-newed Split has been provided with exchangeable inserts which makes it possible to exchange or vary the fractions with each collection container. Because of the fact that the inserts are exchangeable, it is also ...

Model Artho Series - Paper Waste Separation

by Lune/Brink Industrial     based in Hoogeveen, NETHERLANDS

This smallest waste separtion system is filling the gap in our range of waste separation, making it possible to separate your paper waste from the rest at your workspot.  This small bin has despite it's  modest measurements enough space for paper waste and other waste. The Artho is a cubical shaped ...

Model Tulip Series - Steel Waste Separation System

by Lune/Brink Industrial     based in Hoogeveen, NETHERLANDS

A steel waste separation system suitable for approx. 20 (office) workplaces. The separation possibilities are multiple, up to 14 different possibilities. Depending on the choice of the top, the capacity of the section varies between 12 litres to 100 liters.

EMS - Picking Stations for Waste Separation

by EMS Ltd. Environmental Marketing Solutions     based in Killyman, NORTHERN IRELAND

For larger facilities relying on manual separation. Our picking stations allow secure and efficient manual management of waste materials. Each picking bay is essentially a conveyer belt system letting valuable items be removed by hand.

Model Myron Series - Waste Separation Litter Bin

by Lune/Brink Industrial     based in Hoogeveen, NETHERLANDS

Our waste separation litter bin which has been developed for hotels. This elegant litter separation bin is the smallest of our waste separation disposal systems. This litter separation unit has 3 devided sections which go all the way to the bottom of the bin. The largest section of the big Myron has a capacity of 37 litres, the other 2 ...

TOMRA - Model FINDER - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The FINDER is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Screenpod - Model 2200 - Mobile Rotary Screener for Waste Separation

by Screenpod International     based in Cookstown, NORTHERN IRELAND

Screenpod 2200 Mobile Rotary Screener. Unique, compact Mobile Screener with the following features: 2.2 metre Dia. high energy rotary screendish. 50Kw (63Hp) CAT 3.4B diesel engine. Tracked mobile maneuverability. Optional Wireless Remote Control Tracking. Optional Tipping Reject Grid & Shredder. Integrated hydraulic folding stockpiling ...

Ecogest - Model Gemini 3 - Underground Waste Separation and Recycling Unit

by Ecogest srl     based in Recanati, ITALY

“Gemini 3” is a high-capacity single-point underground waste collection system designed for side-loading compactors or bin-type clamping systems. Thanks to its three skips, two 3,200 litre skips and one 2,800 litre skip (giving a total of 9200 litres), the machine is designed for separate or multi-material waste collection. Thanks to ...

Ecogest - Model Gemini 2 - Underground Waste Separation and Recycling Unit

by Ecogest srl     based in Recanati, ITALY

“Gemini 2” is a high-capacity single-point underground waste collection system designed for side-loading compactors or bin-type clamping systems. Thanks to its two 4000 litre skips (for a total of 8000 litres), the machine is designed for separate or multi-material waste collection. Gemini 2 occupies very little road space while ...

Ecogest - Model Gemini 4 - Underground Waste Separation and Recycling Unit

by Ecogest srl     based in Recanati, ITALY

“Gemini4” is a single-point underground waste collection system designed for rear-loading compactors or bin-type clamping systems. Thanks to its four 1700 litre skips, the machine is designed for separate or multi-material waste collection. A Gemini 4 system significantly improves the hygiene conditions tied to garbage collection as ...

Eldan - Model WST - Water Separation Table (System)

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

Eldan - Model C12 / C15 / C22 / C26 - Separation Tables

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan Separation Table in an essential machine for material separation in recycling of e.g. Cables (aluminium or copper), Electronic and electrical waste (i.e. WEEE), Aluminium scrap, Tyres (upgrading quality by removing foreign objects), Shredder light fraction (SLF/ASR).

Need help finding the right suppliers?

Let the XPRTs do the work for you