We couldn't find any waste separation process equipment suppliers or service providers located in Virgin Islands

Here is a list of equipment results with suppliers serving Virgin Islands

waste separation process equipment available in Virgin Islands

  • Premium

    TOMRA - Model X-Tract - Waste Separator with X-Ray Technology

    Cutting edge X-ray sensors empower the X-TRACT for special sorting tasks. By combining X-ray transmission (XRT) and DUOLINE technology, TOMRA's X-TRACT enjoys superior recognition of secondary resources - irrespective of input material desity. Through TOMRA's exclusive high-speed X-ray processing technology, customers benefit from an exceptional ...

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY. from Waste Separator with X-Ray Technology Product line

  • Premium

    Suspension Magnets For Magnetic Separator & Waste Sorting Systems

    Master Magnets have increased their range of Suspension Magnets over the years to cater for the ever-increasing size of conveyors, deeper troughing and conveyor speeds. Master Magnets can offer customers two types of suspension magnet, depending on specific applicational details for magnetic separator & waste sorting systems. The units are ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Solid Waste Shredding & Recycling

    Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Solid Waste Shredding & Recycling Product line

  • Premium

    Harden - Model TS508 - RDF | MSW Waste Shredders

    HARDEN shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels. (RDF) is a broad term that covers a range of fuel types, made from a variety of different types of refuse or waste. the waste with a high calorific value from household waste, bulky waste, industrial waste, commercial waste and sorting ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA. from RDF | MSW Waste Shredders Product line

  • Premium

    HARDEN - Model TDH812 - Bulky Waste Recycling Systems

    HARDEN developed a bulky waste recyclingsystem that include shredders andseparation equipment. Large pieces ofmunicipal waste such as used sofas andwood tables can be shredded andseparated into metal and RDF for furtherprocessing.

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    ENERPAT - Model ESL-E200 - E-waste recycling line

    Product DescriptionEnerpat Produce The Plant (Processing E-waste)Enerpat Do The Business (Recycling Waste Electric)We Produce The MachinesWe Also Do The BusinessChoose Enerpat To Be Your Big Biz Partner!We Need Machines As Below:(1) Feeding in conveyor(2) Two shafts shredder(3) feeding out conveyor(4) overband Magnetic Separator(5) sorting ...

    By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM. from E-waste recycling line Product line

  • Premium

    Defender - Model TTC Series - Channel Screen Conveyor

    Defender channel screen conveyors manufactured by Toro Equipment are items of equipment that perform three different functions: Screening – conveying – Compacting different types of solids. Installing this pre-treatment equipment in wastewater treatment plants will help to prevent the solids of different sizes and varieties that are ...

    By Toro Equipment S.L. based in La Cistérniga, SPAIN. from Channel Screen Conveyor Product line

  • Premium

    HARDEN - Model TL1316 - Pulper ropes recycling

    Ragger wires, also known as “pulper tails” and “pulper ropes”, are reject secondary raw materials that are created when waste paper is recycled. Ragger wires consists of the plastic trimmings, staples, tape, labels and baling wire found in baled post-consumer paper waste. It is made up of approximately 45% steel and 55% post consumer waste and ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Cyclone Scrubber Solutions

    Cyclone scrubbers can be used as part of an incineration system as a dust particle removal system. A cyclone scrubber must be specifically designed to meet the specific needs of the waste stream and the off gas produced to ensure optimum operation. A cyclone functions through a process called vortex separation, when the rotational effects and ...

    By Addfield Environmental Systems Ltd. based in Burntwood, UNITED KINGDOM. from Cyclone Scrubber Solutions Product line

  • Premium

    EUROPELEC - The Degreaser

    The oil removable is a liquid/solid separation operation. Oils and greases being generally lighter than water and naturally tend to rise to the surface. In order to speed up this process, an aerator placed in the centre of the well, diffuses fine bubbles which bring grease and oil particles to the surface. Before they solidify, they are leaded by ...

    By EUROPELEC based in Paris, FRANCE. from The Degreaser Product line

  • Premium

    EZ-Charge - On-Line Charge Density Analyzer

    The EZ-Charge On-line Charge Density Analyzer is an on-line analyzer built on AppliTek’s advanced titrator mainframe and specifically designed for the purpose of dosing control in chemical separation processes. The result output of the on-line analyzer can be compared against a specific setpoint, if necessary with alarm thresholds, so ...

    By AppliTek NV based in Nazareth, BELGIUM. from On-Line Charge Density Analyzer Product line

  • Premium

    LMK 307 T - Model LMK 307 T - Hydrostatic Level Probe LMK 307 T

    BD|SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • DryDisk - Solid Phase Extraction (SPE) Disks & Barrels for Separation Membrane

    DryDisk Separation Membranes offer a much more efficient means of drying solvents in organic extractions than sodium sulfate. Because it is a physical separation rather than a chemical process to remove residual water from organic solvent extracts, DryDisk Separation Membranes eliminate the problems inherent with chemical drying such as retention ...

  • X:GRAN - Shredder Feeder

    Plastic waste is processed by a heavy duty shredder operating at low speed for gentle size reduction and minimal loss of material properties. in this process, a hydraulic ram pushes the material to be shredded onto the shredder shaft. The shredder and extruder drives are controlled separately and automatically, based on load. After shredding, the ...

    By Next Generation Recycling Maschinen GmbH (NGR) based in Feldkirchen, AUSTRIA.

  • Terminator - Single Shaft Shredder

    The Terminator is a slow speed, high torque single-shaft shredder for hard-to-shred waste. C&D, railroad ties, carpet, MSW and tires are no problem for the rugged teeth mounted on the shredding drum and opposing counter comb. The stepless cutting gap allows adjustment of the size of the output material. A new engine compartment with large ...

    By Komptech based in Frohnleiten, AUSTRIA. from Single Shaft Shredder Product line

  • Whirlston - Tire Sidewall Ring Cutter

    Introduction of Waste Tire Sidewall CutterWaste tire sidewall ring cutter is mainly used to cut the sidewall of steel wire tire to be recycled for the next step of segmentation. This tire cutter is a special equipment to cut and separate tire bead ring, tire sidewall and tire crown of waste tires, which is the first process of treating waste ...

    By Whirlston Recycling Machinery based in zhengzhou, CHINA.

  • Recycling Plants

    PSR recycling plants are designed to realize the highest possible degree of purity of the produced plastics. Using them for the production of new plastic products largely replacing virgin plastics by the conditioned plastics is our ambition. A big part of recycling plants carried out by us over the last 20 years has integrated the production of ...

    By PSR Industrieanlagen- und Verfahrenstechnik GmbH based in Waiblingen, GERMANY.

  • PolyMag - Plastic Separator System

    Polymag additives bring metal detectability, X-Ray contrast and magnetic susceptibility into plastic mouldings. The PolyMag process was developed as part of Eriez’ commitment to reducing waste in the processing industry. Eriez PolyMag additive is a non-dusting pellet which allows plastic moulders and extruders to produce metal detectable and ...

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • hamos - Model RSS - Elastomer Separators

    With the hamos RSS elastomer separator, undesired elastomers are separated out in a dry way. A highly concentrated elastomer fraction and a high quality practically elastomer-free plastic fraction are obtained. In recycling of plastics from electronic waste, automotive light shredder fractions (SLF), etc. it is important to obtain clean and ...

    By hamos GmbH based in Penzberg, GERMANY. from Elastomer Separators Product line

  • Permanent Magnet Dry Magnetic Separator for block Ore

    CTDG-Series Permanent Magnet Dry Magnetic Separator for block Ore is a new type high-performance ore separation equipment. The equipment has the following advantages: high magnetic induction intensity, advanced structure, light weight, reliable running and convenient maintenance. Besides existing pattern products, the company can also develop ...

    By Qijin Magnet Co., Ltd. based in Maanshan, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you