Waste Sludge Equipment Near Massachusetts
-
Manufactured by Flo Trend - a Wassar Logistics Holdings, LLCbased in USA
The Self Dumping Hopper Container Filter is an economical, one-step method of separating slurries, sludges, and waste stream. The liquid suspension is conveyed or pumped into the container for ...
-
Manufactured by Flo Trend - a Wassar Logistics Holdings, LLCbased in USA
The "Sludge Mate" Container Filter is a simple one step process for dewatering a variety of sludges. The Sludge Mate Container Filter has no moving parts, requires minimal labor, has extremely low maintenance, and is very economical to ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Tideflex Technology’s Coarse Bubble Aeration Systems provide the operators with extreme flexibility in operational methods for their process systems. Now the process requirements of the system can drive the operational methods not the limitations of the equipment within the tank. Tideflex’s innovative duckbill check valve diffuser is not dependant upon maintaining a positive system ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
drag-out” is a normal operational occurrence during the electroplating process that results in nickel salt loss and waste treatment considerations. Operational costs related to both the replenishment of the lost nickel and sludge waste generation can seriously impact an operation’s efficiency. NickelPur is specifically ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The DPU System recovers phosphoric acid and mixed acids in aluminum finishing operations. The system combines a cation resin bed with a water elutable resin bed to economically remove dissolved aluminum from phosphoric acid rinse water, which then concentrates phosphoric acid up to 85% to be ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
production quality and efficiency while reducing chemical purchases and waste treatment ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Etching or chemical milling with caustic soda can often be the greatest operating expense in aluminum anodizing. Our CER Caustic Etch Recovery System continuously crystallizes and removes dissolved aluminum from caustic soda etchants and returns the caustic to the etching/milling tanks for reuse resulting in reduced chemical costs, waste ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Based on the APU system, the AnoPur system is specifically adapted for sulfuric acid purification in aluminum anodizing. Dissolved aluminum is continuously removed from sulfuric acid used in anodizing baths to reduce the contaminants to a consistently low level. This eliminates the need for bath decanting, reduces acid purchasing costs, and ensures a consistent and predictable anodizing ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
The latest precision respirometer for rapidly measuring actual Activated Sludge bacterial performance in-situ. Self Cleaning – Self Calibrating: ASP-CON can be installed permanently into several different areas in the Secondary Wastewater Treatment Plant to provide feed-forward or feed-back control for plant operation and ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
Self Cleaning – Self Calibrating: ASP-CON can be installed permanently into several different areas in the Secondary Wastewater Treatment Plant to provide feed-forward or feed-back control for plant operation and optimisation. The ASP-Con carries out several continuous measurements, and also analyses discrete batch samples of the product to give the following parameters on a frequency which ...
-
Manufactured by MGD Process Technology Inc. (MGD)based in USA
The Turborator is a self aspirating submerged impeller aerator and mixer. When the patented Turborator® impeller rotates in a liquid, a low pressure zone is created behind each blade. This low pressure zone creates a strong vacuum which draws air down the shaft and disperses as fine bubbles into the surrounding liquid. Air is introduced up to 9 feet below the surface without requiring a ...
-
Manufactured by ClearStream Environmental Inc.based in USA
) zone, sludge blanket zone, and a clarification zone. A turbine draws concentrated settled solids from the bottom, and mixes them with the lower solids concentration influent and disperses it into the reaction ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Mixing - Circulation - Homogenization in Waste Sludge Digesters. One of the key-parameters for the overall energy efficiency of a biological wastewater treatment plant is the ability to produce a high amount of methane gas in the waste sludge digesters. The more gas can be delivered to the biogas fire motors (engines), the more ...
-
Manufactured by Ostara Nutrient Recovery Technologies Inc.based in CANADA
A cost-effective and complimentary solution upstream from the Pearl® process is Waste Activated Sludge Stripping to Remove Internal Phosphorus (WASSTRIP®). The WASSTRIP process complements Pearl by releasing magnesium, potassium and phosphate prior to WAS thickening. Thickening liquor (e.g. GBT filtrate, DAF subnatant ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Full power with reduced energy consumption. Decanter centrifuges for sewage sludge and waste water applications. The demands on the quality and efficiency of sewage treatment plants are growing from year to year, not least due to rising energy and disposal costs. As a result, using decanters to dewater sludge means using ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
In the process of treating waste water, fine biological sludge is constantly produced during the decomposition process at a sewage treatment plant. For a stable decomposition process in the biological treatment phase, the sludge produced in the secondary sedimentation pond, also known as excess sludge, is removed and fed into the ...
-
Manufactured by HeGo Biotech GmbHbased in GERMANY
In waste water treatment and sludge dewatering, polymers in granular form are frequently used. To fully exploit the potential of these products, optimal conditioning of the polymer solution must be ensured. Uneven dosing of the polymer granules or incomplete wetting of the individual particles before the dissolving process leads to unsolved ...
-
Manufactured by Pentek Inc.based in USA
Pentek waste Transfer Lids helps move liquids and semi-liquid materials continuously through your waste collection system without taxing its operating performance envelope. In particular, VAC-PAC® systems are designed to operate in continuous, maintenance free service for extended periods of time; up to one (1) year between service ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you