waste to energy equipment in Ohio

  • Showcase

    TurboSorb - Semi-Dry Spray Dryer Absorber (SDA)

    MEGTEC offers SDA technology to treat industrial process gas streams, with applications in biofuels, incineration, iron and steel, mining and metallurgical, cement, and waste-to-energy, to name a few. Our SDAs provide effective control of SOx and HCl by the injection of calcium, potassium or sodium-based slurries. Unlike wet scrubbers, all water ...

    By Dürr Megtec LLC Office in Columbus, OHIO (USA). from Semi-Dry Spray Dryer Absorber (SDA) Product line

  • Alternative Fuels & Energy Products

    Vadxx is a green energy company whose continuous-flow processing technology converts plastic waste to a range of energy products and synthetic oil. Recovering this valuable energy reduces waste sent to landfills, incinerators and water eco-systems.

    By Vadxx based in Cleveland, OHIO (USA).

  • Launrec - Model RBT - Waste Water Heat Reclaim System

    The LAUNREC RBT is a complete heat reclaim system which recovers the energy contained in the waste water of industrial laundries and textile dye houses. The recovered energy is used to preheat a secondary water stream to within 8°F (4.5°C) of the waste water temperature.

    By SOFAME Technologies Inc. Office in Cincinnati, OHIO (USA).

  • ANDRITZ MeWa - Refuse Derived Fuels (RDF) Production Plants

    ANDRITZ Recycling supplies specific technologies, processes and equipment for the conversion of waste to energy. This includes equipment for shredding, screening, classification and drying. The outcome is valuable goods, such as high-calorific RDF, as well as non-combustible fractions.

    By ANDRITZ MeWa - ANDRITZ Group Office in Springfield, OHIO (USA). from Refuse Derived Fuels (RDF) Production Plants Product line

  • De-Watering Reject Waste Paper System

    Before waste paper can be converted into recycled paper, all undesirable material must be separated out. This reject has a high water content and it can be compacted and de-watered using the  RUNI Screw Compactor. Draining in a RUNI Screw Compactor reduces the water content of the reject from 65 % to 35 %, making it dry enough for use as ...

    By Runi A/S Office in Columbus, OHIO (USA). from De-Watering Reject Waste Paper System Product line

  • Chemineer - Model HE-3 - High-Efficiency Impeller Pump

    An extremely efficient turbulent flow impeller for blending, heat transfer and solids suspension. Most effective for Reynolds numbers over 50. Developed to minimize the creation of trailing vortices and incorporating the otherwise wasted energy into macro-flow.

    By National Oilwell Varco based in Dayton, OHIO (USA). from High-Efficiency Impeller Pump Product line

  • RUNI - Model SK240 - Screw Compactor

    The screw compactor for the greater requirements. Save space and handling costs through rapid, efficient waste management. Save energy – no heat required in the process. Profit from selling for reuse. Airtight – suitable for compacting dust. Different configurations for a large number of materials. Heavy Duty Pre-crusher can be fitted ...

    By Runi A/S Office in Columbus, OHIO (USA). from Screw Compactor Product line

  • Launrec - Model RBT - Heat Reclaim System

    The LAUNREC RBT is a complete heat reclaim system which recovers the energy contained in the waste water of industrial laundries and textile dye houses. The recovered energy is used to preheat a secondary water stream to within 8°F (4.5°C) of the waste water temperature.

    By SOFAME Technologies Inc. Office in Cincinnati, OHIO (USA).

  • Geyser - Model GIP - Inertia Pump

    Low Cost, Low Energy for Return/Waste Activated Sludge (RAS, WAS) Pumping. The Geyser Inertia Pump has been developed to provide clog free sludge pumping using less energy with easy control of the pumping rate.

    By Geyser Pump Tech, LLC based in Columbus, OHIO (USA).

  • Centrifugal Solids Separators

    Anyone who pumps water for any purpose - irrigation, industrial, or private and public water systems - knows their greatest enemy is sand, silt and grit. These elements reduce efficiency of equipment by plugging and clogging sprinklers, drip emitters, valves and spray nozzles. They also cost time and money in repairs, replacement parts, downtime, ...

    By ProgressiveEnviro.com based in Newbury, OHIO (USA). from Centrifugal Solids Separators Product line

  • Geyser - Model GAP - Air-Pulse Pump

    Low Cost, Low Energy for Return/Waste Activated Sludge (RAS, WAS) Pumping. The Geyser Air-Pulse Pump has been developed to provide clog free sludge pumping using less energy with easy control of the pumping rate.

    By Geyser Pump Tech, LLC based in Columbus, OHIO (USA).

  • Komar Viking - Model II - Hydro-Auger Industrial Shredder

    The KOMAR Viking II Hydro-Auger Industrial Shredder provides primary shredding of difficult, oversize or bulky waste at the lowest online operating cost of any volume reduction equipment. It handles a high volume of waste at low speed with minimum noise, dust and energy requirements. The Viking II industrial shredder utilizes high-torque, ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Hydro-Auger Industrial Shredder Product line

  • Waterford - Disposal Well Tanks

    Waterford Tank builds disposal well tanks to fit your needs in oilfield production, waste fluids, sump fluids, oil or gas treating plant fluids, and any non-hazardous fluids from energy and any non-oilfield related industries. Our disposal well tanks are a great fit for any industry.

    By Waterford Tank & Fabrication, Ltd based in Beverly, OHIO (USA). from Disposal Well Tanks Product line

  • Komar - Model Tiger Electro - Shear Shredder

    The KOMAR Tiger Electro-Shear has the appetite to handle your waste for primary shredding utilizing the shredding action of high torque, low shaft speed counter rotating cutter disks in a variety of tooth patterns and sizes. It operates at slow speed with minimum noise, dust and energy requirements with electrical automatic anti-jamming action.

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Shear Shredder Product line

  • Komar - Model EM - Auger Compactor

    Komar auger compactors are built to handle any of your size or volume reduction needs. From general plant waste to bulky, oversize materials, the Komar line of auger compactors can do the job with minimum noise, dust and energy requirements. All of our compactors are designed to pack reduced materials directly into 40 cubic yard containers, or ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Auger Compactor Product line

  • Komar - Model Tiger Electro - Shear Heavy Duty Hard Drive Shredder

    Manage your hard drive destruction needs with the KOMAR Tiger Electro-Shear. This shredder has the appetite to handle your waste for primary shredding utilizing the shredding action of high torque, low shaft speed counter rotating cutter disks in a variety of tooth patterns and sizes. It operates at slow speed with minimum noise, dust and energy ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Shear Heavy Duty Hard Drive Shredder Product line

  • Komar Herculean - Model I - Hydro-Auger Compactor

    When there's an application that requires a machine with heavy-duty shredding and/or compacting ability, along with higher hourly throughputs, the Herculean I Hydro-Auger is perfect for the job. Industrial facilities, utility companies and waste management facilities all find that the Herculean I easily handles difficult materials including ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Hydro-Auger Compactor Product line

  • RUNI - Model SK370 - EPS Compactor

    The RUNI EPS compactor for industrial solutions with a capacity of app. 2oo kg per hour. The free-standing model with the pre-crusher mounted directly or the compactor incorporated in a silo system for capacity of up to 1000 kg per hour. Larger screw, more power, more capacity. Profit from EPS waste to valuable material. Save space and handling ...

    By Runi A/S Office in Columbus, OHIO (USA).

  • CompAir - Model DH Series - Water Injected Rotary Screw Compressor

    The DH series contains absolutely no oil anywhere in the compressor and has been certified ISO 8573-1 Class Zero (2010) and silicone free. The unique design achieves lower speeds combined with lower operating temperatures - both resulting in high efficiency and reduced component wear. Using a single-stage, direct-driven motor without gears or ...

    By CompAir - a brand of Gardner Denver based in Sidney, OHIO (USA). from Water Injected Rotary Screw Compressor Product line

  • Briquetters

    The briquetting of fuel was a significant business in the early 20th century. A multitude of plants around the world produced literally tens of millions of tons of usable and economic material that met the energy needs of industry. This process faded mid-century though, as other fuel sources became available. Currently, briquetting is undergoing a ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Briquetters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you