Waste To Energy equipment in Tennessee

Waste to Energy and Renewable Fuels

PHG Energy’s modern downdraft gasification technology allows the use of existing waste streams or a flexible array of feedstock for conversion to combustible gaseous fuel for kilns, boilers or electrical generation.

By PHG Energy, LLC based in Nashville, TENNESSEE (USA).

PHG Energy - Low-Tar Biomass Gasification System

PHG Energy’s Downdraft Gasifier is a sequential, co-current flow, gravity-assisted, thermo-chemical phase change reactor or, more simply put, a revolution in biomass gasification.

By PHG Energy, LLC based in Nashville, TENNESSEE (USA).

Digester / WWTP Bio Gas Recovery

Millions of gallons of sewer water is returned to Waste Water Treatment Plants (WWTP) for cleaning. The sewer water comes from households as well as commercial & industrial facilities.

By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Green Energy Product line

Model SPD - Waste Heat Distiller

Aqua-Chem has more than 40 years of experience supplying watermakers to naval forces. We offer a range of plate-type distillers for use on naval supply ships. Aqua-Chem is currently delivering 53 tpd units for installation on the T-AKE, Lewis and Clark Class dry cargo ships, a solution proven to provide high-purity distilled water for ship systems ...

By Aqua-Chem based in Knoxville, TENNESSEE (USA).

Phoenix - Model 40 - Waste Oil Electrical Generator

The Phoenix-40 is the next generation of technology that is capable of utilizing waste oil products, such as used motor/equipment oil, to produce electricity for transfer to the power grid. Utilizing the award-wining, clean burning Cyclone Mark V External Combustion Engine, preliminary designs rate the P-40 generator system as producing upwards of ...

By Phoenix Power Group LLC based in Cordova, TENNESSEE (USA).

Dust Collection Systems

Rees-Memphis Dust Collection and Filtration Systems incorporate the latest technology in the processing of solid waste and dust. With tougher regulations from OSHA and EPA on dust exposure limits and atmospheric emissions, greater emphasis is being placed on the need for environmental systems.

By Rees-Memphis, Inc. based in Memphis, TENNESSEE (USA). from Industrial Air Systems Product line

Model DCR Series - Deep Chilling Removal Systems

Reduced - Engineering cost, Installation cost. Compact design - Less Land & piping requirement. Speedier project delivery. Lower operating cost. Energy savings.

By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Biogas Treatment Product line

McCloskey - Model R155 - High Energy Durable Vibrating Screener

The R155 High Energy Screener is a tough, robust screening tool, designed to cope with the heaviest of applications. With the ability to handle some of the worst, untreated construction and demolition waste, the R155 can minimise material pre-handling, and provide clean end products.

By McCloskey International Limited Distributor in TENNESSEE (USA). from Vibrating Screener Product line

Project Portal™ - Powerful Yet Intuitive Cloud-based Software

Project Portal™ is a powerful yet intuitive cloud-based internet application developed specifically for use in the environmental and energy industries. Project Portal brings together data, documents, schedules and team members to a common meeting place where users are offered intuitive tools to access and manipulate project data. This ...

By de maximis Data Management Solutions (ddms) Office in Knoxville, TENNESSEE (USA).

Model HDS Series - Hybrid Drying System (Future-Aire)

The Pioneer HDS Series (Future-Aire) combines the advantages of a refrigerant dryer and a heatless regenerative dryer. A PIONEER Refrigerant dryer is used to lower the pressure dewpoint of compressed air down to 40°F/4.4°C, and a PIONEER Heatless Regenerative Dryer is used to lower the PDP to -40°F/-40°C to -100°F/-73.3°C.

By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Refrigerant Dryers Product line

Model HDS Series - Hybrid Drying System

The Pioneer HDS Series (Future-Aire) combines the advantages of a refrigerant dryer and a heatless regenerative dryer. A PIONEER Refrigerant dryer is used to lower the pressure dewpoint of compressed air down to 40°F/4.4°C, and a PIONEER Heatless Regenerative Dryer is used to lower the PDP to -40°F/-40°C to -100°F/-73.3°C.

By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Regenerative Dryers Product line

HAMMEL - Model VB 750 - Primary Shredder

Depending on the shaft configuration the HAMMEL-all-rounder shreds various materials from the wood, waste and metal in different sizes.

By HAMMEL Recyclingtechnik GmbH Distributor in TENNESSEE (USA). from Primary Shredder Product line

HAMMEL - Model VB 850 - Primary Shredder

Even the HAMMEL-primary shredder VB 850 is particularly suitable for shredding large-volume materials from wood, waste and metal. Moreover, in addition to other options, metal separation, breaker bar or stone crusher are available,

By HAMMEL Recyclingtechnik GmbH Distributor in TENNESSEE (USA). from Primary Shredder Product line

HAMMEL - Model NZS 1000 - Secondary Shredder

With the HAMMEL-secondary shredder NZS 1000 final products from 50 to 150 mm can be achieved depending on the selected screen basket.

By HAMMEL Recyclingtechnik GmbH Distributor in TENNESSEE (USA). from Secondary Shredder Product line

HAMMEL - Model VB 650 - Primary Shredder

The VB 650 is available as a diesel or electric version, stationary or with hook-lift and already shreds three times the amount compared to the VB 450.

By HAMMEL Recyclingtechnik GmbH Distributor in TENNESSEE (USA). from Primary Shredder Product line

Rotobec - Model Elite 910 - Stationary Mount Loader

The ELITE Stationary Mount Loader is without question the toughest, most versatile, longest lasting knuckle boom loader of its size. With the industry’s lowest total cost of ownership, the ELITE is quickly becoming the favorite of owners and operators around the globe. Available in a variety of configurations, we have a solution for every ...

By Rotobec Inc. Distributor in Waverly, TENNESSEE (USA).

CalorVal - BTU Analyzer

The CalorVal BTU Analyzer continuously measures the heating value (Calorific Value) of gaseous streams of industrial processes. Control Instruments' standalone CalorVal BTU Analyzer optimizes burner efficiencies through measuring and controlling blended gas mixtures. These economical, fully-heated, air aspirator driven assemblies come complete and ...

By Control Instruments Corporation Distributor in Knoxville, TENNESSEE (USA).

Gas inFusion Technology

Gas inFusion Technology is a global platform technology with numerous potential market uses, both stand alone and bundled with other technologies. The Technology is a unique method of infusing gas into liquids with demonstrated ability to: Effect rapid, no bubble, gas transfer (inFusion); Create ultra-saturation dissolved gas conditions, e.g., ...

By inVentures Technologies Incorporated. Distributor in TENNESSEE (USA).

Subscribe to our eBulletins

Add Supplier Profile