waste to energy equipment in Romania

  • Premium

    ANDRITZ Vandenbroek - Model VDB - Rotary Drum Dryer

    The rotary drum dryer is suitable for drying woody biomass, agricultural products, and municipal solid waste (MSW). For the production of alternative fuels as well as in the area of waste-to-energy, ANDRITZ Vandenbroek rotary drum dryers are applied to decrease the moisture of the material to the desired level fo downstream process steps.

    By ANDRITZ Separation - ANDRITZ Group Office in Cisnadie, ROMANIA. from Rotary Drum Dryer Product line

  • Premium

    ANDRITZ - Model BDS - Belt Sludge Drying System

    Municipal sludge drying and granulation using waste heat. The patented ANDRITZ AG belt drying system (BDS) is characterized by its flexibility and ability to use a wide range of energy sources, particularly low-grade waste energy. BDS can be used for drying a broad range of products, such as industrial and municipal sludge, cow manure, biomass, as ...

    By ANDRITZ Separation - ANDRITZ Group Office in Cisnadie, ROMANIA. from Belt Sludge Drying System Product line

  • Premium

    Krauss-Maffei - Model VZU-G - Gypsum Vertical Peeler Centrifuge

    The Krauss-Maffei VZU-G gypsum centrifuge is most suitable for desulfurization of flue gases from coal-fired heat/ power plants, waste incinerators, and copper smelters. Washing the flue gas with limestone slurry is the most successful method and generates reusable gypsum.

    By ANDRITZ Separation - ANDRITZ Group Office in Cisnadie, ROMANIA. from Gypsum Vertical Peeler Centrifuge Product line

  • Premium

    Presona - Smart Waste Baler

    If you want a baler that will perform with an optimized energy efficiency, choose the Presona baler. The correct capacity Presona baler to meet the customer’s requirements is always available. The Presona Baler Series consists of 6 basic models, the OH, EH, VH, CH, DH and XH. These letters refer to size of the feed opening. All models are ...

    By Presona AB Office in Ciorogarla Jul. Ilfov, ROMANIA.

  • HydroThane - Model SWD - Solid Waste Digestion Process System

    The HydroThane STP SWD (Solid Waste Digestion) process is based on the CSTR (Continuous Stirred Tank Reactor) technology. The SWD process is mostly used for waste reduction and green energy production and is a robust, proven process which treats industrial effluents with significantly high amounts of suspended solids.

    By HydroThane STP BV Office in Bucharest, ROMANIA. from Solid Waste Digestion Process System Product line

  • Premium

    AERZEN - Model Generation 5 - Turbo Blowers

    For the maximum of energy efficiency in waste water treatment. Designed to handle unsolved energy problems. This is the key unit for more energy efficiency, as single or combination design – and the power behind every municipal or industrial waste disposal facility: the AERZEN Turbo Generation 5. Unbeatable, AERZEN’s mix of blower, ...

    By Aerzener Maschinenfabrik GmbH Office in Bukarest, ROMANIA. from Turbo Blowers Product line

  • Premium

    KAHL - Domestic Waste Pelleting Plants

    Compact Energy: Waste belongs to the category of the most difficult materials to be processed. With KAHL plants municipal and industrial waste can be transformed into valuable alternative fuels.

    By Amandus Kahl GmbH & Co. KG Distributor in Corunca, ROMANIA. from Domestic Waste Pelleting Plants Product line

  • UNTHA - Model XR3000R - Waste Shredder

    With minimal operating costs and maximum performance, the XR is by far the most innovative waste pre-shredder for municipal solid waste (MSW), C&D waste and commercial & industrial waste in the global marketplace. With a completely new drive concept, “UNTHA Eco Drive” guarantees up to 50 % less energy consumption in comparison ...

    By UNTHA Shredding Technology Gmbh Distributor in Brasov, ROMANIA. from Waste Shredder Product line

  • De-Watering Reject Waste Paper System

    Before waste paper can be converted into recycled paper, all undesirable material must be separated out. This reject has a high water content and it can be compacted and de-watered using the  RUNI Screw Compactor. Draining in a RUNI Screw Compactor reduces the water content of the reject from 65 % to 35 %, making it dry enough for use as ...

    By Runi A/S Distributor in Bucharest, ROMANIA. from De-Watering Reject Waste Paper System Product line

  • RUNI - Model SK240 - Screw Compactor

    The screw compactor for the greater requirements. Save space and handling costs through rapid, efficient waste management. Save energy – no heat required in the process. Profit from selling for reuse. Airtight – suitable for compacting dust. Different configurations for a large number of materials. Heavy Duty Pre-crusher can be fitted ...

    By Runi A/S Distributor in Bucharest, ROMANIA. from Screw Compactor Product line

  • RUNI - Model SK370 - EPS Compactor

    The RUNI EPS compactor for industrial solutions with a capacity of app. 2oo kg per hour. The free-standing model with the pre-crusher mounted directly or the compactor incorporated in a silo system for capacity of up to 1000 kg per hour. Larger screw, more power, more capacity. Profit from EPS waste to valuable material. Save space and handling ...

    By Runi A/S Distributor in Bucharest, ROMANIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you