Waste Treatment Equipment In Netherlands
-
Manufactured by Ecolucht B.V.based in NETHERLANDS
, phosphorus, microplastics and ammonia. Our biofilm carrier a good move to reduce your secondary sludge in your wastewater treatment system. Most industrial wastewaster systems distinguish 3 phases: primary sewage sludge: first separation process, secondary sludge: with our biofilm carrier, tertiary sludge: thanks to our flocking ...
-
Manufactured by Ecolucht B.V.based in NETHERLANDS
Find out how our biofilm carrier can significantly reduce your secondary sludge from communal waste. We can realise a 10 times higher concentration of living microbes with our open cell structure. The longer the biofilm carrier settles in your wastewater the more effective it gets on solving your contaminants such as carbon, ...
-
Manufactured by Waste Treatment Technologies (WTT)based in NETHERLANDS
We specialize in the design and construction of integrated and sustainable solutions. This system uses a combination of mechanical sorting and biological treatment like composting or anaerobic digestion. Mechanical treatment sets the stage for ideal aerobic and anaerobic biological processes. Once the materials have finished their time ...
-
Manufactured by G-force Consulting Engineers BVbased in NETHERLANDS
The Plant in the photo is specifically designed for the treatment of a wide variety of oily waste classifications from fresh slop oils stored in tanks to mixtures of weathered oily waste held in pits, lagoons and lakes. Its capacity is determined mainly by the viscosity of the feed. For example waste oils with a viscosity in the ...
-
Manufactured by G-force Consulting Engineers BVbased in NETHERLANDS
G-force’s latest designed MKIIIFA. A Fully Automated Oily Waste Treatment Plant designed specifically to adjust process parameters to accommodate a wide range of oily waste classifications, simplify process decisions, reduce human error and eliminate down ...
-
Manufactured by G.I. Dynamicsbased in NETHERLANDS
HUMID OXIDIZATION WITH PEROXIDE (OHP®) is an advanced patented technology for wastewater treatment. It effectively solves the problem of hard-to-treat wastewaters, especially non-biodegradable waters, at competitive operational and investment ...
-
based in NETHERLANDS
Application: Anaerobic waste water treatment is applied in many industrial areas for waste water purification of water containing large amounts of organics (COD > 2.000 ...
-
based in THAILAND
Scrubbers (odour removal, chemicals removal). ODORIX: Waste gas treatment for odour removal using biological oxidation ...
-
Manufactured by Gicom B.V.based in NETHERLANDS
The aerated floors are constructed with spigotpipes that are designed by Gicom. These spigotpipes are available in 2 different dimensions, depending on the amount of aeration that is needed. The floor can be driven upon with a front end loader. The floors can be indoor as well as outdoor. A Gicom fan supplies a central ductwork with air. On this central ductwork several branches with individual ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
A Hubert microscreen drum filter is widely applicable for fine-filtration of large water flows. A Hubert micro screen or horizontal rotary micro strainer can be used for pre-treatment of influent & effluent in a waste water treatment plant. ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
Hubert central drive system, ideal for refurbishments and new builds. Hubert manufactures central drive systems (cage drives/ industrial drive) for clarifiers & thickeners applied for liquid-solids separation. A central drive mechanism rests on a stationary column mounted in the center of the sedimentation tank . A half or full-span bridge then attaches to the robust housing of the drive unit. ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
A Hubert clarifier or scraper bridge removes suspended solids from wastewater. Hubert clarifiers provide continous low-cost separation and removal of suspended solids from wastewater. ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
An (axial flow) surface aerator pushes water from under the water’s surface up into the air, then the droplets fall back into the water, mixing in oxygen. It is used to treat waste water – it is effective in introducing oxygen to the top foot of a water volume. surface aerators can also be used to keep still waters volumes ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
Hubert supplies a thickener for most common applications. Hubert supplies a complete range of gravity thickener machinery for (gravity) thickening and removal of primary, secondary and stabilised sludge. ...
-
Manufactured by Promeco SpAbased in ITALY
The simplest, easiest and most effective solution for the organic fraction ...
-
Manufactured by Promeco SpAbased in ITALY
To separates the organic from the inorganics of MSW. The organics is cleaned from contaminants such as plastics or paper. Designed from the experience gained using the Promeco Eco Dryer in the waste ...
-
Manufactured by Promeco SpAbased in ITALY
Bioextruder Promeco is the simplest, easiest and the most efficient solution for the organic fraction treatment. The technology comes from Promeco Extruder System® machine used for several years in plastic and waste ...
-
Manufactured by Promeco SpAbased in ITALY
To extract organic pulp from organic waste. Designed from the experience gained from waste plastic ...
-
Manufactured by Promeco SpAbased in ITALY
The simplest, easiest and most effective solution for the organic fraction ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Etching or chemical milling with caustic soda can often be the greatest operating expense in aluminum anodizing. Our CER Caustic Etch Recovery System continuously crystallizes and removes dissolved aluminum from caustic soda etchants and returns the caustic to the etching/milling tanks for reuse resulting in reduced chemical costs, waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you