Waste Valve Equipment
-
Distributed by H-TEC, Inc.based in USA
Automatic air release and vacuum valve, stainless steel 316Ti, for operating range: 0 – 250 PSI (17.2 Bar), outdoor application ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. CanLeaf Valves can be used for isolation or throttling application. CanLeaf Double eccentric design butterfly is used for lowering the friction between the disc and the seat. CanLeaf Dovetail seat design with multiple raised ring is ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
and the PTFE thrust gasket. CanLeafAn overlay with minimum 90% pure nickel is welded over the seat area for long term corrosion resistanceand improved tightness over the plug valve life. CanLeafThe stem seal design is self-adjusting. It is isolated from the plug stem and external torque device and isunaffected by pressure ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
Metal Seated Gate Valves fully meet or exceed AWWA C500 and MSS SP 70 standards. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. CanLeaf All iron parts are coated inside & outside with fusion bonded epoxy for corrosion resistance per AWWA C550. CanLeaf Design with solid wedge and ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
Main valve uses globe design for superior control characteristic. CanLeaf Top and Bottom seat rings are used to guide the stem and diaphragm assembly for extended life time and stability. CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. Stainless steel used for seat and disc retainer ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
CanLeaf High strength ductile iron body used for lowering the weight and improving long term durability. CanLeaf Advance dynamic design of single body with diffuser provides streamline flow and assures lower head loss. CanLeaf One of the lowest head loss check valve, resulting in savings towards power costs, valve disc with shorter ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
-shock combination air valve to prevent from damage or impact of severe water hammer. CanLeaf Anti-shock device is installed on top of bonnet, it will slow down the exhausting air flow during filling to prevent hammer impact, under vacuum condition, the device will drop down and let large air into the ...
-
Manufactured by Vahn-Tech International Inc.based in CANADA
VAHN-TECH DC Series knife gate valves are linear shut off valves that are light weight with compact construction. Valves are available as manual with handwheel, or can be automated with pneumatic cylinder or electric actuator for remote operation. The arc shape of the gate of our knife gate valve is designed to be particularly ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Removes calcium, chlorine, chloramines, and other volatile and industrial chemicals. The Soft-Tec Residential Scale Control System chemically changes the calcium in hard water that normally builds up as scale on appliances to microscopic crystals, which then move through pipes and your appliances, leaving no residue on inside or outside ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
The Soft-Tec Scale Control System combines a chemical filter with a scale control system, providing your household with soft, chemical-free ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
The Soft-Tec Scale Control System combines a chemical filter with a scale control system, providing your household with soft, chemical-free ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Reliably collecting the separated compounds is the ultimate goal of a preparative chromatography application. The Fraction Collector C-660 collects all your samples according to time, volume or peak mode in any type of tubes or ...
-
Manufactured by Filtran Filtration Technologiesbased in TURKEY
FAMILIAS series filters have mesh sieve structure. Particles that are desired to decompose from the filtered water are installed on the filter inner surface and the pressure between the filter inlet outlets make a difference. Thanks to the pressure difference sensor & sivici, the filter waste valve opens automatically when the ...
-
Manufactured by Filtran Filtration Technologiesbased in TURKEY
SOLIS series filters have WEDGE WIRE FILTER structure. Particles that are requested to be decomposed from the filtered water are attached to the filter inner surface and between the filter inlet outlets they make a difference of pressure. Thanks to the pressure difference sensor&sifier, the filter waste valve will be opened when the ...
-
Manufactured by Filtran Filtration Technologiesbased in TURKEY
RERUM series filters have mesh screen structure. Particles that are required to be decomposed from the filtered water are attached to the filter inner surface and create a pressure difference between the filter inlet outlet. Thanks to the pressure difference sensor & sivici, the filter waste valve automatically opens when the ...
-
Manufactured by Filtran Filtration Technologiesbased in TURKEY
MIRACULUM series filters mesh POLYESTER sieve has structure. Particles that are required to be decomposed from the filtered water are attached to the filter inner surface and the pressure difference between the filter inlet and outlet. With pressure difference sensor & sivici, the filter waste valves automatically open and the water ...
-
Manufactured by Filtran Filtration Technologiesbased in TURKEY
Particles that are required to be decomposed from the filtered water are attached to the filter inner surface and the pressure difference between the filter inlet and outlet. Thanks to the pressure difference sensor & spiker, the filter waste valve is opened when the filter pre-set difference reaches the pressure level. The end of the ...
-
Manufactured by Spectron Gas Control Systems GmbHbased in GERMANY
Purge- and connection-block for use with high-purity, strongly corrosive or toxic gases in combination with an inert gas purge arrangement. Contaminated purge gas can be vented through waste gas valve without entering the downstream system. Available with pressure gauge (for low vapour pressure gases), with pressure regulator (mounted ...
-
Manufactured by Valvolmeccanica S.r.l.based in ITALY
Standard: Complete with 0/60 stainless steel case pressure gauge, inlet bow G ¾″ M.; outlet bows G ½″ M.; Ø30 brass anti vortex with hose shank waste pipe; regulation valve for returns. Max operating pressure: 50 bar. Max capacity: 200 ...
-
Manufactured by Euroacque SRLbased in ITALY
Self-cleaning propeller filter with stainless steel cartridge. Complete of pressure gauges and waste valve. Thanks to the super effect propeller, the number of cleaning reduced in consisting way and in the same way reduced the labour and water saving. That it is obtained by means of a propeller patented placed to the base of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you