wastewater aeration equipment in Texas

  • Agpro - Aerators

    Agpro has several types of aerators available for use in wastewater tanks and ponds. Energy efficiency, weather protection and serviceability are all factors taken into account when developing each of these units. They can be mounted on floating platforms or fixed brackets. The following picture is the 5 hp Centirator with an Eddy Guide Ring which ...

    By Agpro Inc based in Paris, TEXAS (USA).

  • VBT - Model 100 Series - Aerator System for On-Site Wastewater Treatment

    The Vacuum Bubble Technology Aerator 101 is sized for on-site wastewater treatment, small commercial applications, and pretreatment of industrial wastewater. Several configuration options give flexibility to meet differing requirements. Available options, which may be ordered, include an all-weather housing, self-monitoring electronic controller, ...

    By The Advanced Aeration Group, LLC based in Angleton, TEXAS (USA).

  • Premium

    TETRA - Submerged Aerated Filters (SAF)

    The TETRA SAF submerged aerated filters are a simple process for the biological oxidation of ammonia-nitrogen (NH3-N) and BOD for both municipal and industrial wastewaters.  TETRA SAF is an upflow, fixed-film biological reactor that uses coarse media requiring no backwashing.

  • HEE-Duall - Aerators and Degasifiers

    Our HEE-Duall brand Aerators and Degasifiers are custom-engineered as efficient and cost effective solutions for the removal of volatile organic compounds (VOC), methyl tertiary-butyl ether (MTBE), hydrogen sulfide (H2S) and CO2, found in groundwater supplies, industrial wastewaters, and process effluents.We apply decades of experience to optimize ...

    By CECO Environmental based in Dallas, TEXAS (USA). from Aerators and Degasifiers Product line

  • Premium

    Sauereisen SewerGard - Model No. 210S - Spray Applied Polymer Lining for Municipal Wastewater

    Sauereisen SewerGard No. 210S is a fiber-filled, spray-applied lining specifically designed to protect concrete and steel surfaces of municipal wastewater treatment structures from chemical attack and physical abuse. No. 210S's application properties permit economical protection of new and rehabilitated substrates. When cured, No. 210S provides an ...

    By Sauereisen Inc. Distributor in TEXAS (USA). from Spray Applied Polymer Lining for Municipal Wastewater Product line

  • Model ASP - Sewage Water Treatment

    This is a Improvised Waste Water Treatment Process called as Activated Sludge Process. In this process Wastewater is Aerated for biological growth and settled by various treatment units. The treated water will be disinfected and filtered for secondary usage. We offer prefabricated units in MS-FRP and in Civil based systems.

    By Canadian Clear based in San Antonio, TEXAS (USA). from Sewage Water Treatment Product line

  • SuperOx Box - Oxygenation Technology

    SuperOx Box’s Oxygenation Technology is a patented process which has demonstrated its ability to dramatically reduce costs while increasing the efficiency, effectiveness, and capacity of municipal wastewater facilities. Current aeration methods are enormously inefficient and require substantially greater amounts of energy to deliver needed ...

    By SuperOx Wastewater Co., LLC based in Houston, TEXAS (USA).

  • Moving Bed Biofilm Reactor (MBBR)

    Moving Bed Biofilm Reactor (MBBR) processes improve reliability, simplify operation, and require less space than traditional wastewater treatment systems. MBBR technology employs thousands of polyethylene biofilm carriers operating in mixed motion within an aerated wastewater treatment basin. Each individual biocarrier increases productivity ...

    By Headworks Inc. based in Houston, TEXAS (USA). from Moving Bed Biofilm Reactor (MBBR) Product line

  • Fiberglass Odor Control Covers for Water and Wasterwater

    Glass-Steel, Inc. custom designs and fabricates odor control covers for collection of  noxious emissions in numerous water and wastewater applications. All covers have integral access doors custom sized to fit the requirements of each particular application. The fiberglass composite materials used for each application vary to suit the ...

    By Glass-Steel, Inc. based in Conroe, TEXAS (USA).

  • Premium

    Sauereisen SewerGard - Model Industrial No. 210TN - Field-proven Unique Polymer Lining System

    Sauereisen SewerGard Industrial No. 210TN is an aggregate-filled, NovolaK epoxy material. This lining system is specifically designed to protect concrete surfaces of industrial wastewater treatment structures and collection systems from chemical attack and physical abuse. SewerGard No. 210TN's non-sagging application properties permit economical ...

    By Sauereisen Inc. Distributor in TEXAS (USA). from Field-proven Unique Polymer Lining System Product line

  • E-FLEX-Float - Aaeration System

    E-FLEX- FLOAT is the floating version of our proven E-FLEX- Aaeration System. It is mainly used for aerated wastewater ponds or lagoon tanks with plastic liner, earthen basins with natural sealing, natural ponds and lakes and all aerated tanks, in which the levelling of conventional bottom aerators is only possible with considerable effort ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in Tomball, TEXAS (USA). from Aaeration System Product line

  • Hyperdive - Mixing and Aeration System

    The INVENT HYPERDIVE®- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage. In addition to the task of introducing oxygen, it also fulfils the important function ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in Tomball, TEXAS (USA). from Mixing and Aeration System Product line

  • Aqua Decant - Model AD - Gravity Discharge Decanters

    Discharges subsurface laminar layer of clean water without disturbing the sludge blanket or floatables. Gravity and pump options are available with mechanical actuation to close the weir during aeration and mixing phases preventing wastewater or activated sludge entering the discharge pipe

    By Aquasystems International NV Distributor in TEXAS (USA). from Gravity Discharge Decanters Product line

  • TEX-FLEX - Aeration System

    The TEX-FLEX -Aeration System has been specially developed and optimized for demanding applications in industrial and municipal wastewater treatment plants. For industrial applications in particular, the use of conventional membrane diffusrers is restricted or even impossible, or else they must be frequently replaced in order to ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in Tomball, TEXAS (USA). from Aeration System Product line

  • Jet Aeration System

    Fluidyne Jet Aeration provides an economical and effective approach to oxidizing and mixing wastewater. Jet Aeration Systems are ideal for both industrial and municipal activated sludge processes including SBRs, oxidation ditches, extended aeration and BNR. Due to their flexibility, large solids handling capability and efficiency, jets are also ...

    By Fluidyne Corporation Distributor in TEXAS (USA). from Jet Aeration System Product line

  • INVENT iCBA - Coarse Bubble Aeartion System

    The INVENT Coarse Bubble Aeration system (iCBA) has been developed and optimised for special applications in industrial and municipal wastewater treatment plants. It provides oxygen supply and optimal mixing during the biological phase, in particular for use in processes that use carrier media for biomass detention, whether moving-bed or fixed-bed ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in Tomball, TEXAS (USA). from Coarse Bubble Aeartion System Product line

  • Integrated Fixed Film Activated Sludge (IFAS)

    Integrated Fixed Film Activated Sludge (IFAS) process is a state-of-the-art biological process used in treatment of municipal and industrial wastewaters for BOD removal, nitrification and denitrification. The process is a hybrid of suspended growth and fixed-film (attached growth) process and may be viewed as a combination of Activated Sludge and ...

    By World Water Works, Inc. Distributor in TEXAS (USA).

  • EcoJet - Robust Motors

    One of the many reasons Aerator Solutions is the leading aerator solution for the wastewater industry, is our proprietary motor design brings ultimate efficiencies to your operations. The EcoJet aerator IEEE 841 TEFC motors are specifically suited for pulp and paper mills requiring severe-duty, long-life motors.

    By Aerator Solutions Distributor in TEXAS (USA).

  • Hyperclassic - Mixing and Aeration System

    The INVENT HYPERCLASSIC- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage.

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in Tomball, TEXAS (USA). from Mixing and Aeration System Product line

  • Trickling Filter Extended Aeration (TFEA) System

    Waterworks' Trickling Filter Extended Aeration (TFEA) system uses combined attached and suspended biological growth systems to remove over 90% of soluble organics (BOD and COD) and suspended solids. The TFEA is suitable for treating both municipal sewage for stand alone performance and tough industrial wastewaters for surcharge reduction. In ...

    By Waterworks Technologies Inc. Distributor in San Angelo, TEXAS (USA). from Trickling Filter Extended Aeration (TFEA) System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you